Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Home Additions & ADU: The Arlington Owner’s Guide
We build and finish Sterling-compatible additions and accessory dwelling units for Arlington homeowners, and installed projects here typically land between $45,000 and $130,000 for an addition, or $90,000 to $220,000 for a full ADU. Most owners don’t call us because something “failed” the way a part fails. They call because a Sterling structure that was framed and dried in years ago now shows the real costs of a bad finish-out: drafty walls, soft spots near the slab, doors that won’t latch square, and a punch list the last crew never came back to close. We hear the same sentence almost weekly in Arlington: “It looked done, and then the first hard summer found every shortcut.”
Which Sterling Models This Applies To
Sterling has built a wide spread of plans over the decades, and the model on your survey, appraisal or county record won’t always match what’s actually standing in the yard. Start with the physical tags. Look for the data plate on the structure itself (often near the electrical panel, inside a closet, or on the frame at the utility end), any HUD or state seal, and the original plans if the previous owner left them in a kitchen drawer. Measure the footprint and ceiling height and write the numbers down. Model names are less reliable than dimensions and framing type, because additions get added to additions.
That matters here because Arlington sits in a region with expansive clay soils and summers that push structures hard. The finish-out parts we source have to match the framing as it actually sits, not as the brochure said it would. Seamless compatibility is a claim we won’t make. We measure, then we order.
On the OEM-versus-aftermarket question, our honest position: for structural connectors, tie-downs and load-rated hardware, we specify the manufacturer’s published part or a listed equivalent with the documentation to prove it. For finish items like trim, panel skins, door hardware, thresholds and sealants, a quality aftermarket product is often the better and cheaper answer, as long as the spec matches. We carry premium brands across every trade we touch, including KraftMaid, Cambria and Silestone for finish work, and we install what we can look up in a specification sheet. To be clear, Barrett & Sons Construction Arlington is an independent contractor and is not affiliated with Sterling.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Addition or ADU Needs Real Attention
- Doors and windows that stick in summer and free in winter. Expanding clay and thermal movement are working against a frame that may never have been tied down properly. If it gets worse every August, get it looked at.
- Soft or visibly dipping floors near the perimeter. Moisture wicking under a slab or a blocked vapor barrier shows up first at the edges and under exterior doors. Dragging a chair across a ridge in the floor is the usual discovery.
- Musty smell that returns after cleaning. That’s usually air and moisture moving through unsealed penetrations, missing flashing at the roof tie-in, or a bathroom vent terminating in the attic instead of outside.
- Bubbling or peeling paint at seams and corners. Water is getting behind the finish at the joint between the original house and the addition, where the flashing detail is most often skipped.
- Electrical outlets that trip the breaker when a space heater runs. Underbuilt circuits are common in older finish-outs and are a sign the electrical work was never inspected. Stop using that outlet and get it checked.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Arlington, a home addition runs $45,000 to $130,000 installed. A garage conversion runs $30,000 to $80,000, and a full ADU runs $90,000 to $220,000. What drives the number: footprint and roof line, whether the slab and foundation can be reused, electrical service capacity, window package, and how much of the existing finish has to come out before new work goes in. A simple envelope repair and refit sits at the low end; anything that touches structure, mechanicals and full finish-out climbs toward the top.
You get the part cost and labor on the same written line, never padded into one lump at the end. Permits are pulled and inspections signed on every eligible job. Every allowance and every price change arrives on paper before work moves. And every completed job carries the written 90-Day Done Right Promise: if it isn’t done right, one call brings Tom Barrett back to make it right.
DIY or Call Us?
Here’s the honest split. You can safely check and document. Photograph the data plate, measure the footprint, note the date every symptom showed up, test the GFCI outlets, and put a level on the floor. Those notes help us quote accurately.
What we don’t recommend is opening walls, cutting into the roof tie-in, or chasing a fault through the electrical panel of an addition yourself. An addition is a structural and electrical system; a bad cut at a load point or a missed ground fight can burn the place, and we’ve seen it happen. This is not a job for a weekend. Call us and let a licensed crew with up to 28 years of experience put eyes on it. Estimates are free.
FAQs
How long should a Sterling addition last? A well-built finish-out here should hold 20-plus years. The failures we see in Arlington usually trace to water getting in at the roof tie-in or under the door thresholds, not to the structure itself. Call (888) 590-9867 for a free estimate.
Can it be repaired instead of rebuilt? Often, yes. A failed flashing detail, a sticking door, or an underbuilt circuit can usually be repaired in place, and we’ll tell you plainly if repair is the better call. Call (888) 590-9867 for a free estimate.
How long will the work take? A finish-out repair runs days; a full addition or ADU runs weeks to months depending on permits and inspections. You’ll get a realistic schedule in writing with your estimate. Call (888) 590-9867 to schedule it.
How do you source the parts? We measure on site, then order from published specifications so the hardware and finish match what’s there. We don’t claim to hold stock or carry parts on a truck. Call (888) 590-9867 for a free estimate.
Ready to get this sorted? Call Barrett & Sons Construction Arlington at (888) 590-9867 for a free estimate. We answer live, 24/7, and our published standing offers are there for you: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% Senior & Veteran discount.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.