Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Grohe Driveway & Pavers: The Arlington Owner’s Guide
We install and service Grohe-compatible driveway and paver systems for Arlington homeowners, and most paver driveway work here lands between $7,000 and $18,000 installed, with concrete replacements running $5,000 to $14,000. Repair and re-leveling jobs are usually scheduled within the week, not left on a waiting list. Owners usually find a problem the same way: a paver lifts after a hard rain, a joint washes out along the driveway apron, or a corner of the slab settles a half inch and suddenly catches the mower deck. Grohe’s hardscape systems are tied to dimensional specs and drainage profiles, so a failing component shows up as movement before it shows up as a crack.
Which Grohe Models This Applies To
Grohe’s paver and hardscape component line covers edging profiles, joint-fill systems, drainage channel components, and concrete paver units in standard thicknesses (60mm for pedestrian driveways and 80mm for vehicle traffic, which is the thickness an Arlington driveway needs since this is blackland clay with a shrink-swell cycle). Identification matters more than brand loyalty here. Look for a stamped or inked mark on the paver edge or underside, measure the actual dimensions in millimeters (not inches, the metric conversion is where mismatched replacements come from), and check the field or lot number printed on the original pallet band if you kept it. Grohe runs different profiles by system, and a 60mm pedestrian unit will not hold up where an 80mm vehicular unit was specified. On the OEM-versus-aftermarket call: OEM Grohe components guarantee the joint profile and base fit, and an exact-match aftermarket paver is fine for color and finish but only if the thickness and interlock geometry match to the millimeter. We tell Arlington owners to compare the failed unit against a retained spare, not against a photo on a website.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Grohe Driveway & Pavers Is Failing
- Paver ruts or depressions along the wheel path. The base layer wasn’t compacted in lifts, or the blackland clay underneath has swelled and shrunk through a season of wet-dry cycles. Once the base moves, the paver moves with it.
- Joint sand washing out after rain. Standing water along the edge means the drain slope is off or the joint-fill component has failed. Grohe’s polymeric joint systems are rated to hold, but only on a properly sloped bedding layer.
- Edge restraint lifting or shifting. The edge profile is what keeps the whole field from spreading. When it works loose, the outer rows push out and the driveway loses its shape.
- Individual pavers rocking or popping when you walk on them. A rocking unit means bedding failure underneath, not a bad paver. Replace the paver without fixing the bed and it rocks again in a month.
- Efflorescence or a chalky white film weeks after installation. Usually a moisture problem pushing salts up through the concrete, which points back to drainage and vapor under the system.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Arlington, a full paver driveway installation runs $7,000 to $18,000, and a concrete driveway replacement runs $5,000 to $14,000. Asphalt paving sits at $3,500 to $9,000, and driveway sealing (a routine protective coat, not a fix for movement) runs $250 to $700. Paver patio installation is $3,500 to $11,000 if you’re pairing it with the driveway.
What drives the range: total square footage, whether the base has to be excavated and re-compacted, the paver thickness and finish you choose, drainage channel work, and how much existing material has to come out. Every quote is line-itemed in writing: so much for demolition, so much for base and aggregate, so much per square foot for pavers, so much for edge restraint and joint fill. If the base turns out to be deeper than the quote assumed (common in older Arlington neighborhoods), that change arrives as a written change order before we touch it, never as a surprise at the end. The work is backed by our written 90-Day Done Right Promise.
DIY or Call Us?
An owner can safely check a few things: walk the driveway and mark the rocking units, hose the surface to see where water pools, and check whether the edge restraint is still tight and level. That’s diagnostic work, and it helps.
Where DIY goes wrong is underneath. Paver driveways fail at the base, and getting the base right on Arlington’s clay means excavation depth, aggregate gradation, and plate compaction done to a spec. Tamp a paver back down over a bad bed and it fails again within a season. Lifting a settled field by hand and re-set with bagged sand never matches the original joint profile. And the safety side: an untied stack of concrete pavers on a pallet weighs well over a ton, and a lifted slab or a tipped pallet is the kind of thing that breaks a foot. We’d rather you hand us the diagnosis and let a trained crew do the base work. Call (888) 590-9867 to schedule a free estimate.
FAQs
How long does a Grohe paver driveway last in Arlington? A properly installed Grohe paver driveway should last 25 to 30 years or more. The pavers themselves outlast the job; the base and drainage decide the real lifespan, and Texas clay is the hardest test that base will ever see. Call (888) 590-9867 for a free estimate on your driveway.
Can a failing section be repaired instead of replaced? Yes, a localized repair is often the right call, and it usually costs a fraction of a full replacement. We lift the affected field, re-establish the base to the correct depth, and re-set matched pavers, which is why identifying the exact Grohe profile and thickness matters before we start. Estimates are free, so call (888) 590-9867 and let’s look at it.
How long does a repair or swap actually take? A localized paver repair is usually a one-day job. A full driveway installation typically takes three to five working days depending on square footage and how much base excavation is needed. We’ll put the schedule on the quote in writing so you know what to expect. Call (888) 590-9867 for a free estimate.
How do we source the Grohe part? We measure the existing unit, confirm the model and thickness, and order the exact-match component or an approved aftermarket equivalent to your spec. If the correct Grohe profile has a lead time, we’ll tell you up front in writing. We’re an independent service provider, not affiliated with Grohe; we also work with KraftMaid, Cambria, and Silestone on the interior side of the house, so a hardscape-and-kitchen project can run through one team. Call (888) 590-9867 and we’ll walk through the sourcing together.
Barrett & Sons Construction Arlington has been serving local communities for over 29 years, founded in 1998 and owner-operated from day one. Tom Barrett publishes his name, his address, and his license number: look it up before you sign anything. We pull every eligible permit and get the inspection signed, because the last contractor most folks used told them permits were optional. Standing offers: $40 Off Any Repair Over $200, a Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount. A live person answers the phone 24 hours a day, seven days a week. Call (888) 590-9867 for a free estimate.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.