Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Driveway & Pavers: The Arlington Owner’s Guide
If your Owens Corning paver system is settling, heaving, or shedding sand from the joints, we install and repair Owens Corning-compatible driveway and paver systems in Arlington, and the typical installed range runs $7,000 – $18,000 for a full paver driveway. Concrete alternatives here run $4,500 – $12,000, and asphalt $3,500 – $9,000. Nobody replaces a driveway same-day, so plan on a scheduled estimate and a real calendar, not a phone promise.
Most owners discover the problem the same way. A paver corner lifts where the car turns in. Polymeric sand washes out after one heavy Arlington storm and the joints turn into weed channels. Or the base under the driveway sinks near the slab and the field stops sitting flat. Our technicians have up to 28 years of experience, and we’ve seen every one of those failures in this county.
Key Takeaways
- Owens Corning paver systems are manufactured to a fixed set of thicknesses and joint widths, so the replacement piece has to match the profile, not just the color.
- Most failures in Arlington come from base and drainage, not from the paver itself.
- Full paver driveway installation in Arlington typically runs $7,000 – $18,000.
- We’re an independent contractor, not affiliated with Owens Corning.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Which Owens Corning Models This Applies To
Owens Corning paver systems come in interlocking profiles and load-bearing series, and the thing that trips up homeowners searching for a replacement is that the color name is not the product name. Two pavers can look identical on a driveway and be different thicknesses, with different chamfer edges and different joint spacings. Match the wrong one and the field never lines up again.
Here’s how to identify what you actually have. Pull a single loose paver from a corner or an edge where you won’t disturb traffic. Measure the thickness with a tape at the four corners, not just the middle, because a worn paver reads thin at center. Note the width and length to the nearest sixteenth of an inch. Photograph the face texture and the edge profile against a ruler. Then read the pallet banding or the stamp molded into the underside of the paver, because that is the real product code.
On OEM versus aftermarket for pavers, the honest answer is different than it is for a mechanical part. Paver manufacturers don’t make a “part number” the way a garage door company does. What matters is dimensional match, compressive strength, and colorway. A quality aftermarket paver in the same thickness and strength grade will perform identically over twenty years, and sometimes better when the original colorway is discontinued. We’ll tell you plainly when a compatible match is the smarter buy and when chasing the exact original piece is worth it.
Signs Your Owens Corning Driveway & Pavers Is Failing
- Polymeric sand washing out after storms. Arlington sits on expansive clay soils that shift with moisture, and when the base under the driveway wasn’t compacted in lifts, water finds the seams and the joint sand leaves with it. Refilling sand without fixing the base is a repeat job.
- Heaving or lifting at the driveway apron. A slab or apron edge that pushes up is usually a drainage problem, not a paver defect. Water trapped against the driveway edge in a freeze lifts the field, and Texas swings that matter happen more than people think.
- Uneven settling in the field. Look for a low spot where water pools after rain. That’s base failure, and it will get worse with every wet season, not stabilize on its own.
- Weeds pushing through joints. Persistent weeds mean the joint sand layer broke down or the weed barrier under the base was skipped or torn. Pulling weeds doesn’t solve it; the barrier and the sand layer both need attention.
- Broken, chipped, or spalled faces. Impact cracks from heavy vehicles or freeze-thaw cycles that pushed moisture into the paver. One or two chipped pavers is a spot repair. Ten across a field usually means the strength grade under the driveway is wrong for the loads on it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the pricing picture for Arlington, and we put it in writing before anything moves:
| Scope | Typical Installed Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Driveway replacement | $5,000 – $14,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway sealing | $250 – $700 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
The range moves on square footage, base depth, how much excavation the site needs, and whether drainage correction is part of the job. On a paver driveway, base prep and compaction are most of the cost, and skipping them is how you end up back here in four years. What’s in writing is the scope, the allowance for pavers, and the labor line, so you can see what the material costs and what the work costs. Our work is backed by the written 90-Day Done Right Promise, which means if something isn’t right, Tom comes back and fixes it with one call.
DIY or Call Us?
Some checks are safe and worth doing yourself. Pull a loose corner paver and measure it. Photograph the stamp on the underside. Note where water pools after a storm. Those three things tell us a lot before we ever pull into the driveway, and nobody gets hurt doing them.
What goes wrong is the next step. Re-leveling a paver field means lifting dozens of pieces and rebuilding the base in compacted lifts, and a driveway that gets half-rebuilt settles out of plane and cracks at the transition points. There’s also real risk in disturbing the apron where it meets the garage slab or the street cut. If you touch a hardscape element near a utility, a gas line, or a structural edge, stop and call someone who knows what’s under there. This is not a two-hour weekend repair, and the honest thing to tell you is that.
Call (888) 590-9867 and we’ll schedule a free estimate. Bring your photos and the measurement off the underside stamp.
FAQs
A properly installed Owens Corning paver system should hold 25 to 30 years or more in North Texas, but the pavers aren’t the part that usually gives out first. The base and the joint sand are, and they need attention roughly every five to seven years in our clay soils. Call (888) 590-9867 if you want someone to look at the base, not just the surface.
Yes, often they can. A single settled corner or a handful of chipped pavers is a spot repair, and it usually runs a fraction of a full installation. The moment to replace is when the field is out of plane in several places at once, or when the base under a large section has failed and can’t be corrected without lifting the whole run. Call (888) 590-9867 for a straight answer on your driveway.
A full paver driveway install in Arlington typically takes three to seven working days, depending on square footage, excavation, and drainage work. A spot repair or re-sand of the joints is a same-day job. Weather pushes the schedule in wet seasons, and we tell you that on the front end rather than after.
We match the profile, thickness, and colorway through supplier channels and quote the material in writing, with the allowance line included so you can see the number before work starts. We don’t buy from a van and we don’t stock parts on a truck, so the material is ordered to your job. Call (888) 590-9867 for an exact quote. Estimates are free.
Get an Owens Corning Paver or Driveway Estimate in Arlington
Barrett & Sons Construction Arlington is an independent contractor, and we’re not affiliated with Owens Corning or any other manufacturer. What we are is owner-operated, and Tom Barrett and his sons are on your street most weeks. Every permit gets pulled. Every scope and allowance and price change arrives in writing before the work happens, because an allowance that isn’t on paper is a surprise waiting for a date. Our standing offers are real and simple: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% senior and veteran discount. We also work with KraftMaid, Cambria, and Silestone on interior projects, so we can help with a kitchen or bath while we’re there.
Call (888) 590-9867 to schedule your free estimate. A live person answers, day or night. Look up the license and address yourself before you sign anything, and ask anyone on your street who else they’d call.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.