A Barrett company - serving Arlington, TX

Atlas Roofing in Arlington, TX

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Atlas Roofing: The Arlington Owner’s Guide

Atlas shingles and roofing accessories installed on an Arlington home typically run $400 – $1,800 for a repair and $8,000 – $20,000 for a full replacement, and we schedule the work on a written timeline, not a phone promise. If you’ve got a failing Atlas shingle, ridge cap, or underlayment, you already know the symptoms: a stain spreading across a ceiling, grit piling up in the gutters, or a shingle flap that lifts every time the wind comes out of the south. We install Atlas-compatible roofing and match the part to your exact model line before anyone climbs a ladder.

Call (888) 590-9867

Which Atlas Models This Applies To

Atlas makes a wide spread of roofing products, and the right replacement depends on which line is on your roof. The common residential lines you’ll see around Arlington are StormMaster Shake, Pinnacle Pristine, ProLam, and the older Summit and Chalet shingle runs. You can usually find the line name stamped on the shingle wrapper in the attic, or read off a bundle label if any extras were left behind by the original roofer. If neither exists, we measure exposed shingle width (typically 5 5/8 inches on a standard three-tab or dimensional) and check the seal-down strip pattern to pin down the family.

Atlas runs its own product families, so this isn’t a “one shingle fits all” situation. A Pinnacle Pristine dimensional shingle is not the same profile as a StormMaster Shake, and swapping one for the other on a visible slope shows. For a patch, we match the line, the color, and the exposure so the repair blends instead of drawing the eye. For a full replacement, the OEM-vs-aftermarket call is real: Atlas-brand shingles cost more per square than a comparable commodity shingle, but the color match to the rest of your roof – and the warranty pathway – is cleaner. We’re an independent contractor, not affiliated with Atlas, so we quote both and let you choose.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Atlas Roofing Is Failing

  • Granule loss in the gutters. Atlas shingles shed some grit early, but a steady trickle of granules means the asphalt is aging out. Once the mat shows through, the shingle is done, not just dirty.
  • Lifted or curling tabs. Arlington’s summer heat cycling – 100°F afternoons, cooler nights – stresses the seal-down strip. Curling tabs mean the shingle has lost its seal and is catching wind.
  • Dark streaks and moss along the north slope. That’s algae (Gloeocapsa magma) feeding on the limestone filler in older shingles. Atlas has algae-resistant lines; if yours isn’t one, streaks will return after cleaning.
  • Interior ceiling stains or attic dampness. Water is getting past the shingle or the underlayment. Check the decking and flashing, not just the shingle face, because the leak often starts at a vent boot or valley.
  • Missing or cracked ridge caps. Hip and ridge caps take the most sun and fail first. A cracked ridge cap on a StormMaster or Pinnacle run lets water straight into the ridge vent.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roof repair on an Atlas roof in Arlington runs $400 – $1,800 depending on access, pitch, and how much decking needs to come up. A full roof replacement lands between $8,000 and $20,000 for most single-family homes here. Metal roofing, if you’re switching, runs $15,000 – $40,000. Those ranges cover tear-off, underlayment, shingles or panels, flashing, and disposal. What pushes you to the top of the range: multiple layers of old shingle to strip, steep pitch, or rotted decking that has to be replaced before the new roof goes down.

Every price we quote is a written line-item, and any scope change arrives as a written change order before work starts. No surprise invoices at the end. Our crew members have up to 28 years of experience, every permit gets pulled, and the finished job carries our 90-Day Done Right Promise in writing.

While we’re on your property, note that we also handle KraftMaid, Cambria, and Silestone installations if you’re planning interior work alongside the roof.

DIY or Call Us?

An owner can safely walk the ground with binoculars, check the attic for daylight and dampness, and clear debris from gutters and valleys. That’s it. Roof work at height is where DIY goes wrong: a wet or mossy slope, a soft deck board, or a gust on a ladder ends in an ER visit more often than a finished repair. Never get on a roof to chase a leak you can’t see from the ground, and don’t try to patch a valley or flashing without knowing what’s under it.

If you’re not sure whether it’s a $400 repair or a replacement, call (888) 590-9867. We’ll take a look, tell you straight, and give you a written estimate. Our second-opinion offer is free on any written estimate you already have in hand.

FAQs

How long does an Atlas roof last in Arlington? Most Atlas asphalt shingles last 20 – 25 years in Texas heat, not the 30 – 50 the label implies, because UV and thermal cycling age the asphalt faster here. Shade, ventilation, and attic temperature all move that number.

Can a damaged Atlas shingle be repaired instead of replaced? Yes, if the damage is isolated to a few shingles or a ridge cap and the surrounding field is sound. We match the line and color, seal the repair, and warranty the work. If the failure is widespread, a patch just postpones the replacement.

How long does the swap take? A patch repair is usually a few hours. A full roof replacement on a typical Arlington home takes one to three days depending on square footage, pitch, and weather.

How do you source the part? We order through roofing suppliers who stock current Atlas lines and pull the matching spec sheet before we buy. We don’t stock parts on a truck; we bring the right part to your job.

If something on your Atlas roof isn’t sitting right, don’t wait for the next storm to find out how bad it is. Call (888) 590-9867 for a free estimate, ask about our current standing offers – $40 off any repair over $200, no trip charge inside the county, and a permanent 10% Senior & Veteran discount – and we’ll get a live person on the phone.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch