Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Fence Installation: The Arlington Owner’s Guide
Fence installation work using Tamko materials in Arlington typically runs $3500 – $9000 installed, depending on footage, height, gate count, and the ground your posts have to sit in. Most Arlington homeowners don’t go looking for this page by accident: they find it after a section of fence is leaning toward the neighbor’s yard, a post has pulled loose from soil that won’t hold, or a gate that once lined up clean now drags every time it closes. In Arlington, that discovery almost always follows a stretch of hard summer sun, a heavy spring rain, or a contractor who set posts too shallow and skipped the permit. We install and repair fence work across Arlington, and we quote honestly what your yard actually needs.
Key Takeaways:
- Installed Tamko-compatible fence work in Arlington: $3500 – $9000 depending on linear footage and site conditions.
- Post depth and soil type decide most failures we see in Arlington, not the panel itself.
- We’re an independent contractor and not affiliated with Tamko, which means we can pick what works instead of one product line.
- Every eligible install gets permits pulled and inspections signed, backed by our written 90-Day Done Right Promise.
Which Tamko Models This Applies To
Tamko is best known in Arlington for roofing and waterproofing, but they also make fence components and accessories, and the part that matters most when you’re repairing or matching a fence is getting the system to fit together correctly. When you call, we’ll ask you to measure the height and thickness of the existing panels and the post spacing so we can match what’s already on your property instead of guessing. The label on a bundle of pickets or a post cap is the fastest clue. If the label’s gone, a tape measure and a photo solve it.
The OEM-versus-aftermarket decision isn’t as loaded on fencing as it is on a garage door spring. On a fence, an aftermarket post or bracket that matches the height and spacing is fine if it’s rated for the wind load your yard sees. On a Tamko-matched system, the small stuff matters more than you’d think. Post caps, brackets, and gate hardware often come in only a couple of sizes per line, and an 1/8-inch mismatch on a bracket will show up as a wobble within a season. Send us a photo of the existing hardware and we’ll tell you which replacement lines clip straight on. We also work with KraftMaid, Cambria, and Silestone on the interior side, but on fences the field is narrower and the weather rules.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Fence Installation Is Failing
Fences in Arlington see a specific set of pressures: hard summer sun that dries out wood and warps vinyl, heavy North Texas storms that hit posts sideways, and a clay-heavy soil that expands and contracts with the water table. The symptoms we see on Arlington jobs tell a story about what actually happened.
- Posts leaning toward one side of the yard. Usually shallow footing, soil that stayed wet through a rainy season, or a post that never got a concrete base. Consecutive posts leaning the same direction is the tell that the whole run may need re-setting.
- Panel sagging between posts. Either a rail has worked loose or the post spacing crept past the manufacturer’s spec. If the gap between posts is over spec, the panels stress with every wind gust and eventually bow.
- Gate drag and hard closing. Hinges, posts, or a settling footer, often all three. Arlington yards on clay soil shift with the seasons, so a gate that closed clean two summers ago can catch today.
- Rot or softening at the post base. Standing moisture at ground level, common in yards that hold water after storms. If you can push a screwdriver into the base, the post is past saving.
- Loose or missing hardware. Brackets and post caps walk off over time from vibration and thermal cycling. A single missing cap is cheap to fix; a missing bracket that lets a panel flex against the next one can cost a whole section.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed fence work in Arlington comes in at $3500 – $9000 for typical residential jobs. A few line items drive where in that range your yard lands.
- Standard 6-foot wood or vinyl run, typical residential lot: $3500 – $6500 installed.
- Aluminum or heavier-duty system: $4000 – $9000 installed, depending on height and gate count.
- Post re-setting and repair (when the panels are still good): priced as a repair, often well under the install range.
- Gate replacement or rebuild: priced separately; gates load differently than straight runs and get their own quote.
Ground conditions swing cost the most. A yard on solid soil with a clean fence line is faster; rocky ground, old concrete, and a foot of topsoil over clay slows everything down. Utility locating adds a step on most Arlington lots with a fence line near a gas or water run. Every scope, every allowance, and every price change arrives as a written change order before we touch the job. The 90-Day Done Right Promise is written on every contract, so if something shifts or sags in the first 90 days, one call brings Tom back to make it right.
DIY or Call Us?
Some of this you can handle yourself. Walking the fence line, checking post caps by hand, and taking photos of any hardware before you call us are the right first moves. If a single post cap or bracket is loose, tightening it is a ten-minute job. Pulling a post that’s set in concrete is not.
Setting fence posts is where DIY fencing goes wrong in Arlington. Post depth isn’t guesswork; it needs to clear the frost-free line and sit in a concrete base sized to the post, and a post that’s set six inches too shallow will lean within two summers. Renting an auger, mixing concrete correctly, bracing the post while it sets, and pulling utility locates first is more work than most homeowners expect for a Saturday job. Fence work near an electrical or gas line needs utility locates before anyone digs, and that’s not optional. For a single loose cap, we’ll tell you how to tighten it. For anything structural, call us at (888) 590-9867 and we’ll walk your yard and tell you the least expensive path that actually holds.
FAQs
How long should a Tamko fence installation last in Arlington? A properly installed fence in Arlington should give you 15 – 25 years for vinyl, and 10 – 15 years for wood depending on how often it’s sealed and how much sun it sees. Post setting, not the panel material, sets the real lifespan ceiling.
Can you repair a Tamko fence instead of replacing it? Yes, and we’ll tell you honestly when a repair makes more sense than a replacement. If the panels are sound and the issue is a few posts or a gate, a targeted repair is often a fraction of a full install. If more than about a third of the posts are failing, replacement usually costs less over the next few years. Call (888) 590-9867 and we’ll quote both.
How long does a fence installation take? A typical 150-foot residential fence in Arlington runs two to three days with a crew on site. Ground conditions, gate count, and utility locates on your lot can stretch it. You’ll have the schedule in writing before we start.
How do you source parts for a Tamko-matching job? We measure what’s installed, match the height, spacing, and hardware specs to what’s available, and walk you through the options before we order anything. OEM Tamko-matched parts are preferred when they’re the right fit; a quality equivalent is fine when it specs out equal. Either way, every part and its cost appears in your written estimate before we order.
Call us at (888) 590-9867 to schedule your free estimate. We’re owner-operated, the crew members are background-checked, we pull permits and get inspections signed on every eligible job, and a live person answers the phone any hour of the day or night. We’re proud to serve the Arlington area, plus Fort Worth, Mansfield, Kennedale, Grand Prairie, and the small towns around Tarrant County.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.