Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Driveway & Pavers: The Arlington Owner’s Guide
We install and repair Boral driveway and paver systems across Arlington, and a full paver driveway here typically runs $7,000 – $18,000, with most repair and reset work priced as a written line item before we start. A paver patio lands around $3,500 – $11,000. We’re an independent contractor, not affiliated with Boral, but we know the product line well enough to match the right piece to the right system.
Owners usually find the problem the same way: a paver heaves after a hard freeze in the Dalworthington Gardens area, a joint sand line washes out after a spring storm, or a driveway edge starts settling toward the street. Sometimes it’s a single cracked unit. Sometimes it’s the base underneath that gave way. Either way, the symptom shows up long before anyone thinks to call.
Which Boral Models This Applies To
Boral’s hardscape line covers a wide spread, and the pieces aren’t interchangeable across all of them. The company’s paver systems include structured lines with specific thickness specs, edge profiles, and interlocking patterns. If your driveway was installed in the last fifteen years, odds are it’s one of the standard Boral paver profiles. Older installs may use a discontinued color or mold that’s harder to source.
The way to identify what you have: flip a loose or damaged paver over and look for the stamp or mold mark on the underside. That tells you which Boral line and thickness you’re dealing with. Measure thickness too, because 60mm and 80mm pavers aren’t swappable in a driveway that takes vehicle load. Get the color lot if you can find it; a different lot of the same color will read as a mismatch under Texas sun.
OEM Boral pieces are the safest match, especially for a visible driveway face. Quality aftermarket equivalents exist, but the color blend and edge profile rarely match a different manufacturer’s product exactly. We’ll tell you straight when an aftermarket piece will work and when it won’t. We don’t carry parts on a truck and we hold no stock, so we source what’s needed for your specific system after we see it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Driveway & Pavers Is Failing
- Heaving or lifting pavers. Frost and moisture in the base layer push units up. In Arlington, our clay-heavy soil and wet winters make this common after a freeze-thaw cycle.
- Joint sand washing out. Water running off the driveway strips the sand between pavers. Left alone, the joints open up and the base starts taking water.
- Settling or a dip in the driveway. The sub-base wasn’t compacted right, or water has been getting under it. A low spot that holds puddles is the tell.
- Cracked or chipped units. Usually from a heavy load, a bad base, or a paver laid too thin. One cracked unit can often be swapped; a run of them means the base is the problem.
- Loose edge restraints. The border that holds the field in place has shifted. Once the edge gives, the whole pattern starts to spread.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Arlington, a paver driveway installation runs $7,000 – $18,000, and a paver patio installation runs $3,500 – $11,000. Those ranges reflect square footage, base prep, and the specific Boral line and thickness you choose. A targeted repair – resetting a settled section, replacing cracked units, re-sanding joints – is priced as a line item and typically comes in well under a full install.
What drives the range: how much base work is needed, whether the existing base can be salvaged, the paver selection, and edge restraint replacement. We put the scope, the allowance, and the material selection in writing before work starts. Every price change is a written change order before anything moves. If it’s not done right, our 90-Day Done Right Promise is written on the contract, one call brings us back. Permits are pulled and inspections signed on any job that requires them.
DIY or Call Us?
You can safely check a lot of this yourself. Look at the paver undersides for the mold mark, measure thickness, note where water pools, and see whether individual units wobble underfoot. Photograph the failure and measure the affected area. That’s useful information, and it makes the estimate faster.
Where it goes wrong is the base. Pulling up pavers and re-laying them without proper compaction, drainage slope, and edge restraint is the most common DIY failure we see. The pavers go back down and settle again within a season because the sub-base was never fixed. A paver driveway is carrying vehicle load; get the base wrong and you’ll be doing it twice. Done right costs less than done twice. Call (888) 590-9867 and we’ll take a look, with no trip charge inside the county.
FAQs
A properly installed Boral paver driveway should last 25 to 30 years or more, but that lifespan depends entirely on the base and drainage. In Arlington’s clay soil, poor drainage shortens that considerably. Joint sand needs refreshing every few years to keep water out of the base.
Yes, often it can. If the issue is a handful of cracked units, washed joints, or a settled patch, a targeted repair usually solves it. If the base has failed under a large area, a partial rebuild is the honest answer. We’ll tell you which one you’re looking at, not the more expensive one by default.
A small spot repair is typically a single-day job. Resetting a larger section or rebuilding base under a portion of the driveway usually runs two to four days, depending on weather and how much base work is needed. We’ll give you a realistic window in the estimate, not a guess on the phone.
We identify your Boral line and thickness from the mold mark and measurements, then source the matching piece for your system. We don’t stock parts and don’t carry them on a truck. For visible driveway areas, color-lot matching matters, so we account for that in sourcing. If a discontinued color is the issue, we’ll lay out your options clearly. We also work with KraftMaid, Cambria, and Silestone on the interior side of the house.
Call (888) 590-9867 for a free estimate. A live person answers day or night. We’ll walk the driveway with you, put the scope in writing, and give you a second opinion on any written estimate you already have. Ask anyone on your street, or look us up before you sign anything. Our technicians have up to 28 years of experience.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.