Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Roofing in Arlington: The Owner’s Guide
PGT makes impact-rated window and door systems, and the “roofing” side of that line is the head flashing, sill pan, and perimeter weather-seal that ties a PGT unit into your roof plane. When that seal or its flashing fails, you get water tracking under the unit, stained ceiling drywall near a valley or dormer, and shingles lifting along the frame. In Arlington, a roofing repair tied to a failed PGT flashing or seal typically runs $400 – $1,800, and a full roof replacement around a PGT-heavy window wall runs $8,000 – $20,000. We schedule assessments quickly but plan the actual repair like real construction, because a one-hour patch on a leaking roof plane is how you end up paying twice.
Most Arlington owners find the problem the same way: a brown ring on the ceiling below the window wall, or granules washing off the shingles right where the frame meets the roof. That is a flashing and seal failure, not a window failure, and we treat it honestly as the roofing problem it is.
Key Takeaways
- PGT flashing and install-seal failures around roof-adjacent units are the most common call we get in Arlington.
- Roof repair tied to a PGT unit runs $400 – $1,800. Full replacement runs $8,000 – $20,000.
- PGT integration parts are impact-rated, and the wrong flashing material fails faster under Texas hail.
- Barrett & Sons is an independent contractor. We are not affiliated with PGT.
- Estimates are free, and every price is written before work starts.
Which PGT Models This Applies To
PGT’s impact-rated window and door lines (their WinGuard lines among them) are what you will most likely find on a roof-adjacent opening, and any of those units that meets a roof plane needs flashing and perimeter weather-seal. Identifying the right part starts with the sill label. Look for the PGT glass and product sticker on the frame, and note the series code and unit dimensions. On a flush-fin unit, the termination detail is different from an inset unit, and a flashing piece cut for one will not seat on the other. That is the compatibility gotcha most homeowners get burned by: they order a general-purpose roof flashing kit, and it will not match the PGT termination.
On the OEM-versus-aftermarket decision, our honest answer is: match OEM profile when you can. A PGT-specific sill pan and closure are cut to that series’ geometry. Standard aluminum flashing bent to fit can work, but it has to be bent to the exact profile, not bent and caulked. Caulking is not a flashing detail. If an OEM part is unavailable, we fabricate a match on-site and tell you in writing what we are using and why.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Roofing Is Failing
- Water staining at the ceiling line above a window wall. The flashing is letting water past the top fin and it is tracking down the wall cavity. In Arlington, hail-season pinholes in the seal are a common culprit.
- Lifted or curled shingles along the frame. The flashing lip is not seated and wind is getting under the course. North Texas spring gusts find this within one season.
- Granules in the gutter below the unit. Shingle wear concentrated around the frame usually means water has been cycling under the flashing. That erodes the asphalt mat before it reaches your ceiling.
- Visible rust or corrosion on the perimeter flashing. The wrong metal, or thin gauge, reacts to Texas heat and moisture cycling. A proper PGT-compatible flashing is not a sheet metal strip from a big-box bin.
- A draft or daylight trace at the frame-to-roof joint. The weather seal has failed and air is moving where it should not. That joint is supposed to be closed and vapor-tight; when it is not, water follows the same path.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost and What’s Included
For an Arlington home with a PGT unit tied into the roof plane, here is what we quote and why:
- Roof repair, flashing and seal: $400 – $1,800. Covers tearing back the affected shingles, replacing the PGT-compatible flashing and weather seal, and re-sealing the joint.
- Roof replacement around PGT openings: $8,000 – $20,000. Full deck-to-ridge replacement including new flashing at every roof-adjacent PGT unit.
- Impact-rated full install: $15,000 – $40,000 for metal roofing where the whole assembly, including flashing, is upgraded to impact-rated spec.
What drives the range: how many courses come up, whether the deck is soft, whether the PGT termination is standard or custom-fabricated, and how many roof-adjacent openings need the detail. Every price arrives in writing before work starts – no surprise invoices later. Workmanship is backed by the written 90-Day Done Right Promise.
DIY or Call Us?
An owner can safely check a few things. Look for the ceiling stain. Inspect the shingle line along the frame at ground level. Note the PGT label on the sill. Do not climb the roof to reset flashing, and do not trowel caulk onto a leaking joint to buy time. That traps moisture and turns a $400 repair into rotted decking and a much bigger bill. Roof work is a fall hazard and a water-management job at the same time, and getting the flashing wrong is how a small leak becomes a ceiling replacement.
For most Arlington roofs, the honest split is: check from the ground, then call. Barrett & Sons pulls permits, uses named materials (GAF and CertainTeed on roofs), and puts the scope and the price in writing. Our crew members have up to 28 years of experience. Call (888) 590-9867 to schedule a free estimate – no trip charge inside the county.
FAQs
A properly matched PGT-compatible flashing lasts the life of the shingle course around it, typically 15 to 25 years in Texas heat. It fails early when the metal is the wrong gauge or the seal was caulked instead of flashed. Call (888) 590-9867 for an exact quote – estimates are free.
Yes, in most cases. If the deck is sound and the leak is at the flashing, a targeted repair runs $400 – $1,800 and stops the water. A full replacement is only warranted when the deck or the surrounding shingle field is already compromised. We’ll tell you which one you actually need in writing.
A flashing and seal repair on a PGT opening usually takes half a day to a full day. A roof replacement around multiple PGT units runs one to three days. We schedule the work like construction, not a same-hour emergency call, and put the timeline on paper before we start.
We match to the PGT series from the sill label, then either source the OEM profile or fabricate a match on-site. Either way, you get the material spec in the written scope before work starts. We do not claim to stock or carry parts on a truck – we source them for your job.
We are an independent contractor and are not affiliated with PGT. We also service KraftMaid, Cambria, and Silestone for homeowners in the middle of a broader remodel.
Call (888) 590-9867 for a free estimate. A live person answers, day or night, and every scope, allowance, and price change is written before any work begins.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.