Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Kitchen Remodeling: The Arlington Owner’s Guide
Barrett & Sons Construction Arlington installs CGI-compatible kitchen remodeling for Arlington homeowners, with typical installed projects running $14,000 – $45,000 depending on cabinet layout, countertop material, and whether the job stays cosmetic or moves walls and plumbing. We install and source CGI cabinet lines and the KraftMaid, Cambria, and Silestone products that pair with them, and every price change arrives as a written change order before a single nail moves.
Most Arlington owners don’t start with “I want a new kitchen.” They start with a cabinet door that won’t stay shut, a soft-close hinge that gave out, or a box that has gone soft near the base. Arlington sits on shrink-swell clay soils, and in older homes around Central and Old Town the low humidity swings of late fall pull cabinet frames out of square faster than most people expect. That’s usually the first symptom someone calls us about.
Barrett & Sons Construction Arlington is an independent service provider and is not affiliated with CGI.
Key Takeaways
- CGI-compatible kitchen work in Arlington runs $14,000 – $45,000 installed, and the range moves mostly on cabinet construction, countertop edges, and layout changes.
- Cabinet boxes and hinges fail before the finish does. Soft-close hinges and particleboard sink bases are the usual culprits in Texas humidity swings.
- You can safely measure, label, and photograph what you have. You should not be re-running plumbing, gas, or electrical to make a cabinet fit.
- Every eligible job gets permits pulled and inspections signed, and the finished work is backed by the written 90-Day Done Right Promise.
Which CGI Models This Applies To
CGI is a cabinet brand, not a single product line, and the line matters more than the logo on the door. Their product families split mainly by box construction (framed versus frameless), door overlay (full-overlay versus standard), and drawer hardware, and a replacement door or box from the wrong family won’t line up with what’s already hanging in your kitchen. Before we quote anything, we identify what you actually own: look for a manufacturer label inside a drawer box or on the back of a cabinet side panel, photograph the hinge body, and note whether the doors sit flush with the frame or cover it. If there’s no label, we measure the opening, the door thickness, and the hinge bore spacing to match the family.
On the OEM-versus-aftermarket question, this is where we get honest with Arlington owners. If you’re matching a handful of doors or a single damaged box, an OEM replacement is usually the cleanest path because the finish and drilling match. If you’re replacing most of the kitchen, sticking with CGI is a preference call, not a requirement, and we’ll show you comparable KraftMaid door styles so you can weigh the two on price and lead time rather than on loyalty to a label.
One compatibility gotcha worth knowing: CGI full-overlay hinges and their standard-overlay hinges are not interchangeable, and the boring pattern in the door differs. Buying a hinge off a shelf by appearance alone produces a door that closes crooked or rubs the adjacent door. Match the hinge to the cabinet family, not to how it looks.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Kitchen Remodeling Is Failing
- Doors that drift out of alignment. Soft-close hinges lose their damping oil over time, and the door starts sagging and slamming. In a kitchen over a decade old, this is the single most common call we get.
- Swollen or crumbling cabinet boxes near the sink. Particleboard and MDF bases soak up moisture and lose structural strength. TX plumbing leaks and dishwasher vapor do the damage quietly, and the box goes soft long before the door shows it.
- A frame that pulls away from the wall. Clay soil movement and seasonal humidity shift the wall plane, and the cabinet frame follows. You’ll see a widening gap along the top or a caulk line that keeps cracking.
- Drawer slides that bind or refuse to close. Side-mount slides misalign when the box racks slightly. If it’s a full-extension ball-bearing slide, the track itself may have worn flat.
- Finishes that fail at the toe kick and bottom rail. Moisture wicks up from the floor, and paint or laminate peels at the lowest point. This is a water issue, not a paint issue, and covering it up won’t hold.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Arlington homeowners actually pay with us, installed, parts and labor together. Cabinet installation runs $4,000 – $13,000, countertop installation $2,000 – $6,500, backsplash $800 – $2,500, and a kitchen island $3,000 – $10,000. A full kitchen remodel lands between $14,000 and $45,000, and a smaller, tighter kitchen between $9,000 and $20,000. The number moves on cabinet construction grade, countertop material and edge profile, whether the layout changes, and whether plumbing or electrical has to relocate. We quote line items, not a lump sum, so you can see the parts cost next to the labor.
Every eligible job includes permits pulled and inspections signed, materials listed by brand and model so you can look them up yourself, and the written 90-Day Done Right Promise on the finished work. If a scope change comes up mid-job, you get a written change order before we proceed. No surprise invoice at the end.
DIY or Call Us?
Some of this is safe to check yourself. You can photograph the labels, measure door thickness and hinge bore spacing, tighten a loose hinge screw with a screwdriver, and note where the cabinet pulls away from the wall. That information helps us quote accurately and saves you a second visit.
What you shouldn’t do yourself is re-route plumbing, gas, or electrical to make a new cabinet or island fit. A gas line or a live circuit moved by an untrained hand is a real hazard, and it’s also the kind of work an inspector will catch. Cabinet boxes also carry real weight, and a wall cabinet that comes off its fasteners is a genuine injury risk. That’s the line where we’d rather you call us.
Call (888) 590-9867 and we’ll talk through what you’ve got and what a realistic range looks like for your kitchen. Estimates are free, and a live person answers.
FAQs
Quality cabinet boxes typically hold up 15 to 25 years, and the finish usually outlives the hardware. In Arlington’s humidity swings, hinges and sink-base boxes tend to be the first things to go, well before the doors or frames. Call (888) 590-9867 for an exact quote on replacing just the failing pieces versus the whole run.
Often yes, especially if it’s a hinge, a single door, or a drawer slide. A soft box near the sink is usually not repairable and is better replaced. We’ll tell you which is which before you spend money. Call (888) 590-9867 for a free assessment.
Replacing a few doors, hinges, or a single cabinet box is often a half-day to a full day. A full kitchen remodel is a multi-week job, planned and scheduled up front rather than promised same-day. Call (888) 590-9867 to schedule your free estimate.
We source them through manufacturer and distributor channels and match the part to your specific CGI cabinet family by label, measurement, and hinge pattern. We don’t carry parts on a truck, so we order to your kitchen rather than guessing at what fits. Call (888) 590-9867 to get started.
We’d rather answer a question now than fix a problem later. Call (888) 590-9867 for a free estimate, and you’ll get scope in writing, allowances in writing, and change orders in writing. Every eligible job gets permits pulled and inspections signed, and every finished job is backed by the written 90-Day Done Right Promise. Barrett & Sons Construction Arlington is an independent service provider and is not affiliated with CGI.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.