Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Driveway & Pavers: The Arlington Owner’s Guide
We install CGI-compatible paver driveways, walkways, and patios across Arlington, and typical paver driveway work runs $7,000 to $18,000 installed depending on square footage, base prep, and border detail. Concrete driveways come in lower at $4,500 to $12,000. We’re an independent contractor and are not affiliated with CGI. Lead times in Arlington usually run one to three weeks out, not same-day.
Owners rarely wake up to a “failed part.” What they get is a paver that rocks when the mower rolls over it, a joint line that keeps washing out sand after every rain, or a low corner of the driveway holding water two days after the storm passes. By the time a paver is loose enough to notice, the base underneath has usually been working itself apart for a season or two. That’s the part of the system that fails first in North Texas, and it’s the part most homeowners never see.
Call (888) 590-9867 for a free estimate. We’ll look at the base, the edge restraint, and the drainage before we quote anything.
Which CGI Models This Applies To
“CGI” gets used loosely, so the first honest step is figuring out exactly which paver line and profile you have. CGI pavers show up across a few product families – traditional rectangular interlocking, tumbled or antiqued finishes, and larger-format slabs. The profile matters because the joint width, chamfer, and thickness tolerance differ between them, and a replacement run has to match what’s already on the ground.
Pull a paver from a corner or the end of a row where it lifts out cleanly. Measure length, width, and thickness in millimeters – a common thickness is 60mm for residential driveways, but don’t assume. Photograph the top surface in daylight and the side profile. Then look for a stamp or batch mark on the underside. That three-part record (dimensions, color name if you can match it, and a photo) is what any supplier needs to pull the right thing.
The OEM-versus-aftermarket call for CGI is more forgiving than it sounds. Matching the exact CGI color and texture is ideal for a repair in the middle of an existing field. For an inset or a full new run, a quality paver from Belgard or Techo-Bloc can match the profile closely and often holds color better under Texas sun. If a supplier tells you “close enough” on a color match, ask to see a physical sample against your existing pavers before anyone orders.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Driveway & Pavers Is Failing
- Pavers rocking or shifting underfoot. The bedding sand has washed out or the base never compacted properly. One loose paver usually means a cluster of them is sitting on air.
- Joint sand washing out after every rain. Water is moving through a spot it shouldn’t. Often the edge restraint is missing, broken, or wasn’t spiked into the subgrade the way it should be.
- Standing water or a soft wet corner. The driveway is flat where it should slope. Arlington sits on heavy black clay soil that swells and shrinks with the seasons, and a base that was cut shallow or drained toward the garage will show it fast.
- Uneven color or dark staining in patches. Could be sun or shade, but a persistent wet-looking patch usually means moisture trapped underneath or moss growing in a low joint.
- Paver edges chipping or spalling. Freeze-thaw cycles and sun exposure both wear on a paver that wasn’t sealed, and a chipped edge on a driveway gets driven over until the damage spreads.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what homeowners in Arlington typically face, all installed:
- Paver driveway installation: $7,000 to $18,000
- Concrete driveway installation: $4,500 to $12,000
- Asphalt driveway paving: $3,500 to $9,000
- Driveway replacement (full tear-out): $5,000 to $14,000
- Driveway sealing: $250 to $700
- Paver patio installation: $3,500 to $11,000
What pushes a quote to the top of that range: square footage, how deep we have to excavate to get to stable soil, whether a failing base needs rebuilding, drainage corrections, and border or specialty paver patterns. Pavers themselves are often a modest share of the total – the base is where the labor goes.
Every scope, every allowance, every price change arrives as a written change order before work happens. No surprise invoice at the end. Every eligible job includes permits pulled and inspections signed, and every completed job is backed by our written 90-Day Done Right Promise – if it’s not right, one call brings Tom back. Call (888) 590-9867 for a free estimate with a written line-item quote.
DIY or Call Us?
Here’s the honest split. What you can safely do yourself: lift a couple of loose pavers from a corner, record the dimensions and any stamp on the underside, photograph the color in daylight, and check the edge restraint along the outside of the driveway for cracks or a missing spike. That’s a five-minute job and it’s genuinely useful.
Where DIY goes wrong: base prep and compaction. Get it wrong and the driveway looks perfect for one season, then every paver you set yourself shifts within a year. A driveway is also heavier work than it looks – a residential paver drive is thousands of pounds of material moved and compacted in lifts. And if your existing base has failed, resetting pavers on top of it just resets the clock.
If you’re not sure whether the base is good, that’s the one thing worth having looked at. Call (888) 590-9867 and we’ll tell you straight whether you need a repair or a rebuild. Estimates are free, and a live person answers the phone 24/7.
FAQs
A well-installed CGI paver driveway typically lasts 25 to 30 years with regular sealing every two to three years. The base is what determines the lifespan – a properly excavated and compacted base under Arlington’s clay soil will outlast the pavers sitting on it. Call (888) 590-9867 if you want us to look at yours.
Often yes. IF the failure is isolated – one section of rocking pavers, a missing edge restraint, a localized low spot – we can lift and reset that area, recompact the base, and re-sand the joints. A full replacement only makes sense when the base has failed across the driveway or drainage is wrong at the grade. Call (888) 590-9867 for a free assessment before you commit to either.
An isolated repair is usually a one-day job. A full paver driveway install typically takes three to five days for an average residential drive, weather permitting, with the base excavation and compaction taking the bulk of that time. Sealing adds another day for cure. Call (888) 590-9867 to schedule and we’ll give you a realistic window in writing.
We order through suppliers we’ve worked with for years, and we pull from the same spec sheet and physical sample you can verify – color, profile, thickness, and batch. If the exact CGI match isn’t available, we bring you a Belgard or Techo-Bloc sample to compare against your existing pavers before you decide. We don’t stock parts on a truck and we don’t guess at matches. Call (888) 590-9867 and we’ll start with your measurements.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.