Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Driveway & Pavers: The Arlington Owner’s Guide
If your CWS driveway or paver surface has cracked, settled, or started shedding sand and joints, we replace and repair it with CWS-compatible materials at installed prices of $7,000 – $18,000 for a full paver driveway and $250 – $700 for sealing in Arlington. We’re an independent service provider, not affiliated with CWS, so we match the right material to your existing system rather than pushing whatever is on hand. Most Arlington owners notice the problem the same way: a hairline crack widens over one summer, a low corner holds water after a storm, or the sand between pavers washes out and the surface starts to feel loose underfoot.
Which CWS Models This Applies To
CWS builds hardscape systems in several lines, and the part you need depends on which one you have. Their paver lines generally fall into two families: a thinner profile (roughly 2 3/8 inches) for walkways and patios, and a heavier 2 3/4-inch profile for driveways that take vehicle weight. The model and series are usually printed on the original contract, or you can identify pavers by measuring thickness at a joint and comparing color and texture to the current CWS catalog.
Your call on OEM versus aftermarket matters more than most people realize. For a color-matched repair where only a few pavers failed, an OEM match keeps the pattern looking right. For a full driveway replacement in Arlington, a quality aftermarket equivalent that meets the same load rating often costs less and performs the same. What we won’t do is mix a thinner walkway paver into a driveway section – that shortcut is exactly why some surfaces fail again within a year. We check the series before we quote.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Driveway & Pavers Is Failing
- Hairline cracks that spread: Texas clay soil shifts with every wet and dry cycle, and a crack that starts small will widen as the base moves under a paver that wasn’t set on a stable layer.
- Sunken or rocking sections: When one paver dips or rocks underfoot, the base has settled or washed out. This is a base problem, not a paver problem, and replacing the top piece alone won’t fix it.
- Sand washing out of the joints: Heavy Arlington rain pushes joint sand out over time. Missing sand lets pavers shift and weeds move in, and it’s one of the most common calls we get after a wet spring.
- Standing water after storms: A low spot that holds water means the slope is off. Ponding water works its way into the base and speeds up the next failure.
- Faded or chalky surface: Sun and heat fade color and break down the sealer. Fading alone isn’t structural, but it’s the point where sealing buys you years.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what these jobs run in Arlington, priced installed with parts and labor together so there’s no surprise invoice at the end:
| Job | Installed Price Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
The range depends on square footage, whether the base needs rebuilding, how much cutting and edge restraint the pattern requires, and material choice. We put every scope and allowance in writing before work starts, and any price change arrives as a written change order first. The work is backed by our 90-Day Done Right Promise.
DIY or Call Us?
You can safely check a few things yourself: measure paver thickness, note where water pools, and see whether joint sand is missing. What goes wrong on a driveway is the part you can’t see. Rebuilding a base, correcting slope so water drains away from the house, and compacting in lifts takes equipment and know-how, and a driveway redone on a bad base fails again fast. There’s no high-tension danger here, but there is real risk of paying twice when a base gets skipped. Call us at (888) 590-9867 and we’ll tell you honestly whether you need a repair or a replacement.
FAQs
How long does a CWS paver driveway last in Arlington? A properly installed paver driveway on a solid, compacted base typically lasts 25 to 30 years or more, though North Texas clay movement and summer heat mean the base and joint sand need attention along the way. Sealing every few years protects the surface and stretches its life.
Can it be repaired instead of replaced? Often, yes. If the failure is isolated to a few pavers or one low spot, we can pull and reset those pieces and re-sand the joints at a fraction of replacement cost. If the base has failed across a large area, replacement is the honest answer. Call (888) 590-9867 for a free estimate and a straight assessment.
How long does the swap take? A sealing job is usually a day. Pulling and resetting a section of pavers takes one to two days. A full driveway replacement runs several days depending on size, base work, and weather. We’ll give you a written timeline before we start.
How do you source the part? We identify your CWS series from the contract or by measuring, then source the matching paver through CWS-compatible suppliers. If a color-match isn’t available, we tell you up front and show you the closest option before any work begins.
We also work with KraftMaid, Cambria, and Silestone on interior projects, and our crew members have up to 28 years of experience. Call (888) 590-9867 for a free estimate on your CWS driveway or paver repair in Arlington – a live person answers, and we’ll give you a written, line-item quote before anything starts.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.