Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Windows & Doors: The Arlington Owner’s Guide
We install ES Windows-compatible windows and doors in Arlington, and a typical replacement runs $4500 – $15000 for standard whole-home window work, with impact-rated units at $8000 – $25000. A single failed sash, balance, or glass unit is usually repaired or swapped out on the same visit when the part matches your model line. Most Arlington owners discover the problem slowly: a window that won’t stay up, a door that drags on the threshold, or fog creeping between panes after a summer of 100-degree days. It starts as a small annoyance and turns into a draft, a stuck opening, or water finding its way past the seal. If that sounds familiar, the real question is which part failed and whether it can be matched to your exact ES Windows model.
Which ES Windows Models This Applies To
ES Windows has built single-hung, double-hung, slider, casement, and patio door lines over the years, and the part you need depends entirely on the series stamped on your window. Look first at the manufacturer label, usually on the top of the upper sash or the side jamb. That label gives you the series and the unit size. If the label is gone, measure the visible glass, the frame depth, and the sash thickness; those three numbers narrow it down fast.
For ES Windows specifically, the model line matters because the balances, sash hardware, and glazing beads changed between product generations. An aftermarket balance sized to the wrong series will fit loosely, pop out of the jamb, or fail within a season. The OEM-vs-aftermarket call is real: OEM parts match the original tolerances exactly, while quality aftermarket equivalents cost less and can work well if they’re matched to the right series and sash weight. What goes wrong is when someone grabs a generic part off a shelf and hopes. We match the part to the label, not to a guess. We also service KraftMaid, Cambria, and Silestone installations across the same homes, so a window or door visit often overlaps with other work we’re already doing in Arlington.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Windows & Doors Is Failing
- The window won’t stay open, or slams shut. A stretched or broken balance spring is the usual cause. In a single-hung or double-hung ES unit, the balance carries the sash weight, and once it goes, the window becomes a hazard.
- Fog or condensation between the panes. That’s a failed seal in the insulated glass unit, not condensation on the room side. North Texas heat and humidity cycles push on the seal until it gives, and the glass has to be replaced or resealed.
- The door drags or won’t latch. On ES patio and entry doors, this points to a worn roller, a shifted hinge, or a frame that’s settled. A dragging door also lets water and air past the weatherstrip.
- Daylight or a draft around the frame. Shrinking or cracked weatherstrip, or a seal that’s pulled away, lets conditioned air straight out. That shows up as a higher summer bill before it shows up as a visible gap.
- Loose, cracked, or cloudy glass at the edge. A compromised glazing bead or edge seal is the failure here. Left alone in Texas sun, a small edge seal failure can spread across the pane.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing in Arlington depends on the part, the model line, and whether we’re replacing glass, hardware, or the whole unit. Here’s what runs through our quotes:
- Single window replacement (standard): $4500 – $15000 for a typical whole-home scope
- Impact-rated window installation: $8000 – $25000
- Hardware, balance, or roller swap: quoted per part and labor, often a fraction of a full replacement
The range is driven by the size and count of the openings, the series of the unit, impact versus standard glass, and whether the frame stays or gets fully replaced. We quote parts and labor as separate lines so you can see what’s part and what’s work. Every price that changes arrives as a written change order before the work moves, and every eligible job includes permits pulled and inspections signed. Our technicians have up to 28 years of experience, and the completed work is backed by our written 90-Day Done Right Promise.
DIY or Call Us?
Some checks are safe to do yourself. You can read the manufacturer label, measure the opening, note whether the sash is loose or the balance is broken, and wipe down the weatherstrip to see if it’s cracked. What you shouldn’t do is guess at the part or force a stuck sash. The real hazard is the balance system: an extended or broken balance can snap back hard, and glass units carry serious weight, so a wrong-handling mistake can mean injury or a cracked pane.
Beyond safety, the most common DIY failure is buying a part that fits the opening but not your ES Windows series, which means it wears out early. We’d rather you called and got the right part the first time. Call (888) 590-9867 and we’ll match the part to your model before anything is ordered.
FAQs
Most ES Windows units hold up well for 15 to 25 years on hardware and seals, but Texas heat and humidity cut that short on glass seals and weatherstrip, which often show wear in 10 to 15 years. Calling early on a small seal or balance issue usually saves a bigger repair.
Often, yes. Hardware, balances, rollers, weatherstrip, and even a single insulated glass unit can usually be repaired while the frame and sash stay in place. A full replacement only makes sense when the frame or sash itself is compromised. Call (888) 590-9867 for a free look before you assume it’s a replacement job.
Most single-part swaps, like a balance, roller, or hardware replacement, take about an hour or less. Replacing a glass unit or a whole sash usually runs two to three hours. We’ll give you a realistic window when we set the appointment.
We match the part to the label on your window or door and order to the series, not a generic equivalent. If an OEM part is available, we quote it; if a quality aftermarket match makes sense, we’ll tell you and price both so you can choose. Call (888) 590-9867 to start with your model number.
Barrett & Sons Construction Arlington connects homeowners with independent local professionals who perform the work. We’re an independent service provider, not affiliated with ES Windows.
If you’re in Arlington and your windows or doors have a failed part, the fastest path is a call. Reach us at (888) 590-9867 for a free estimate, and we’ll match the part to your ES Windows model, quote it in writing, and get the work scheduled. Ask about our standing offers, including $40 Off Any Repair Over $200, a Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and our permanent 10% Senior & Veteran discount.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.