Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Fence Installation: The Arlington Owner’s Guide
Fence installation tied to an ES Windows project in Arlington typically runs $3,500 to $9,000 installed for a standard residential run, and we schedule it as a planned job rather than a same-day emergency call. Most Arlington owners we meet didn’t go looking for a fence contractor at all. They started with windows, heard the sales rep mention a bundled or warranty-covered exterior package, signed, and then found out months later that the fence line the ES Windows documentation touched on was either never installed right or was already failing at the posts. That’s usually the moment the phone rings.
We’re an independent service provider. Barrett & Sons Construction Arlington is not affiliated with ES Windows, and we don’t sell their windows or their exterior products. What we do is install fencing here in Arlington the way it should have been installed the first time: permits pulled where they apply, a written scope before a single post goes in, and a 90-Day Done Right Promise written on the contract.
Key Takeaways
- Installed fence pricing in Arlington: $3,500 to $9,000, driven by material, linear feet, and grade.
- Bring your ES Windows paperwork and any model or series detail; we’ll match the fence spec to the property line, not to a brochure.
- Texas heat and clay soil are what actually kill fence posts here, not the brand on the window.
- Every price change arrives as a written change order before work moves forward.
Which ES Windows Models This Applies To
Here’s the honest part: ES Windows is a window and door brand, so there isn’t a proprietary “ES Windows fence” component you replace like a sash or a balance. What Arlington homeowners actually run into is a fence that was specified, quoted, or promised alongside an ES Windows exterior package and then either never happened or happened badly. So the useful question isn’t which window series you own. It’s what your paperwork says about the fence perimeter.
Before we quote, we ask you to pull three things:
- The ES Windows contract or proposal, if a fence or exterior package appears anywhere on it, even as an allowance line. An allowance that isn’t on paper is a surprise waiting for a date, and the same goes for one that’s vague on paper.
- Your property survey or plat. In Arlington, lot lines in older subdivisions don’t always match what the county GIS shows. The survey is what we build to.
- Photos of the existing fence line, especially the posts and any shared fence with a neighbor. Fence disputes start at shared lines, and we’d rather settle the boundary question before the first hole is dug, not after.
On the OEM-versus-aftermarket question: since there’s no ES Windows-branded fence hardware to chase, material choice is yours. We install vinyl and aluminum, and the spec matters more than the label. A .090-inch vinyl wall and a .075-inch wall look identical in a showroom and behave very differently after two Arlington summers. We’ll tell you which is which before you commit. For other trades we carry premium brands like KraftMaid, Cambria, and Silestone, and we hold fence material to the same rule: materials you can look up and specify by number.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Fence Installation Is Failing
Fence failure in Arlington follows patterns. Here’s what we actually see when we walk a property, and what’s underneath each symptom.
- Posts leaning or wobbly at the base. Usually shallow footings or no concrete at all. Arlington’s black clay soil expands and contracts hard with our wet-dry cycles, and a post set eighteen inches deep in that clay will walk itself loose within a few seasons. Under-mixed or dry-poured concrete speeds it up.
- Rails separating from posts at the fasteners. Most often it’s galvanized nails where screws were needed, or screws driven too close to the board edge. In full Texas sun, wood shrinks and the nail pulls. You’ll see daylight at the joint before the rail drops.
- Vinyl panels bowing or sagging between posts. Excessive post spacing or a thin wall section. Panels need support; a spaced-out post line and a light gauge board will show a belly by the third summer.
- Fading, chalking, or cracking on vinyl faces. UV degradation, and it’s real here. Cheaper vinyl chalks and goes chalky-white within a few years; higher-grade extruded vinyl holds color far longer. Fading alone doesn’t mean failure, but cracking at the rail pockets does.
- Gates dragging, sagging, or not latching. A gate is the heaviest load on the whole fence. Undersized hinges, a gate hung on a single post without bracing, or a post that’s already moving under the gate’s weight. If the gate is the first thing to fail, the post is usually the reason.
One note specific to Arlington: we see a lot of fence lines near the older creek-adjacent lots and low-lying areas where drainage sits after a storm. Posts in those spots rot or heave faster than posts on higher ground. If your fence runs along a drainage path, tell us up front. It changes the footing depth and material recommendation.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included in Arlington
Fence installation in Arlington runs $3,500 to $9,000 for a standard residential run. That range covers both vinyl and aluminum, and it holds whether we’re replacing a full perimeter or a long failed section. Here’s what moves the number:
- Linear feet and post count – the biggest driver. A typical suburban lot perimeter and a large rural lot are different jobs.
- Material – vinyl sits lower in the range; aluminum runs higher at the top end.
- Footings and grade – deeper footings on clay soil or drainage-affected ground, and any slope work, add to labor.
- Gates – a well-braced gate with proper hardware is its own line item, and it’s the part that gets skipped on cheap bids.
- Removal and disposal of the old fence – hauled off, not piled behind your shed.
Every quote we hand you is line-itemed. Material, labor, footings, gates, removal, permits where they apply. If scope changes mid-job, you get a written change order before the work moves – no surprise invoice at the end. Completed fence work carries our written 90-Day Done Right Promise. If something isn’t right, one call brings us back.
DIY or Call Us?
Some fence work an owner can safely handle. Tightening a gate hinge, replacing a single picket, or re-driving a popped nail are all reasonable Saturday jobs, and we’ll happily tell you how if you call and ask.
Where DIY goes wrong is the part that carries real risk: post setting. Digging a proper footing on Arlington’s clay, mixing and setting concrete at the right depth, and keeping a line true for the length of a run is a two-person job with actual technique to it. Do it wrong and you’ve spent the money and the weekend, and the fence leans by fall. Then there’s the physical side. Posts, rails, and panels are heavy, and lifting them on a slope or near a property line is where backs get hurt. If your fence is a full replacement or a long run, that’s not a DIY job, and pretending otherwise costs you more than a quote.
Call (888) 590-9867 and we’ll walk the property with you. Estimates are free, and if the fence is genuinely fine and just needs a hinge, we’ll say so.
FAQs
A properly installed vinyl or aluminum fence in Arlington should hold 15 to 20 years, and often longer with quality material and correct footings. The realistic weak point is the posts, not the panels, because Texas clay movement and summer heat work the footings harder than the panels themselves. Get the footings right and the fence outlives the warranty.
Often, yes. A fence with a few failed posts, a sagging gate, or one damaged run can be repaired rather than torn out, and that’s usually the cheaper call. Repair stops making sense when more than a handful of posts are moving or the panels are cracking at the rail pockets – at that point you’re paying to patch something that’s going to fail again. We’ll give you the honest read either way.
A standard residential perimeter replacement in Arlington typically takes two to four days once material is on site and the ground is workable, with larger or slope-heavy lots running longer. We don’t promise same-day fence installs – this is planned work, and rushing footings is how fences fail. You’ll get a schedule in writing before we start.
We specify material by brand, wall thickness, and gauge, so you can look up exactly what’s going in the ground before you sign. No mystery brands off a van. If you’ve got a preference from your ES Windows paperwork, bring it and we’ll match or explain why we’d spec it differently. We’re not affiliated with ES Windows, but we’ll read the paperwork with you.
Call (888) 590-9867 for a free estimate on your Arlington fence project. A live person answers, day or night. Ask about our $40 Off Any Repair Over $200, the Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and the permanent 10% Senior & Veteran discount.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.