Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Windows & Doors: The Arlington Owner’s Guide
We install, replace, and repair Mr-Glass windows and doors for Arlington homeowners, and most jobs land between $4,500 – $15,000 for window replacement and $8,000 – $25,000 for impact-rated units, depending on how many openings and which series you own. A single failed unit, like one fogged pane or a door that won’t latch, is usually a one-day fix once we’ve matched the part. Owners in Arlington typically find us after a window seal fogs from the inside, a door drags on the sill, or a crank grinds and stops moving the sash. The frame is fine; a component has aged out. We’re an independent service provider, not affiliated with Mr-Glass, so we source the correct replacement part and install it right.
Which Mr-Glass Models This Applies To
Mr-Glass has sold several window and door lines through Arlington over the years, and the part you need depends entirely on which one is in your wall. Vinyl single-hung and double-hung units use one style of balance and sash; casement windows use an operator arm and a different lock; sliding patio doors use rollers and a track that’s unlike anything on a hinged door. The first thing we do on a service call is find the identification label. It’s usually a small sticker in the window’s top or side channel, on the door’s hinge jamb, or etched into the glass corner. That label gives us the series and often the manufacture date.
If the label’s gone, we measure instead: sash width and height, frame depth, and the balance channel dimensions. For Mr-Glass specifically, the gotcha is that the same window size can hold two different balance weights depending on whether it was built for a standard or impact-rated assembly. Order the lighter one and the sash won’t stay up; order heavy and it fights you every time you open it. OEM parts give you factory fit, but quality aftermarket equivalents (balances, operators, rollers, weatherstrip) are often as good and easier to get quickly. We’ll tell you which is which and let you decide.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Windows & Doors Is Failing
- Fog or condensation between the panes. The sealed glass unit has lost its seal, and moisture is now trapped inside. No amount of wiping fixes it; the insulated glass unit needs replacing, not the whole window.
- The sash won’t stay up, or slams down. A balance has failed. These are spring-loaded and under tension, and the balance is sized to the sash weight, which is why a generic replacement usually doesn’t hold.
- The crank turns but nothing happens. The casement operator arm has stripped or the gear is worn. Common on windows that get opened daily and on the sun-facing side where heat cycles the mechanism.
- The door drags, sticks, or won’t latch. Sliding doors usually mean worn rollers or a bent track; hinged doors mean a hinge or the threshold. Left alone, a dragging door wears the frame and turns a small fix into a bigger one.
- Drafts or water at the edges. Weatherstrip and sweeps flatten over time, especially through North Texas summers. You’ll feel it near the frame on a windy day or see staining on the sill after a hard rain.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Arlington homeowners actually pay, installed, for the work these parts fall under:
| Scope | Installed Price Range |
|---|---|
| Window Replacement (full units) | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
Single-component repairs like a balance, operator, roller, or sweep cost far less and depend on the part. The range is driven by how many openings, the series, whether it’s impact-rated, and whether the frame or track needs work along with the part. We price parts and labor separately on the written estimate so you can see exactly what you’re paying for. Every completed job is backed by the written 90-Day Done Right Promise, and we pull permits and get inspections signed on any eligible job. If the scope changes, you get a written change order before we touch the job.
DIY or Call Us?
You can safely handle some of this yourself. Check the label and note the series, measure the sash and frame, clean and lubricate a track, and tighten a loose hinge or handle. That’s useful information to have ready. Where it goes wrong: window balances and casement operators are spring-loaded and under real tension. A balance that slips the channel can snap back hard and cut a hand or catch you in the face, and doors are heavy enough to drop a finger or a foot if a roller lets go mid-lift. For anything involving the balance, operator, or a full unit swap, have a trained crew do it. Call us at (888) 590-9867 and we’ll look at it. Estimates are free, and there’s no trip charge inside the county.
FAQs
How long should a Mr-Glass window or door last in Arlington? Typically 15 to 25 years for the frame and glass, with the moving parts wearing out first. Balances, operators, rollers, and weatherstrip commonly need replacing at the 10-to-15-year mark, and faster on sun-facing windows where North Texas heat cycles the mechanisms. Call (888) 590-9867 for a free estimate on replacing the worn part.
Can the part be repaired instead of replaced? Often, yes. A fogged unit means the insulated glass needs swapping, not the whole window. A stiff crank can sometimes be cleaned and re-lubed; a stripped one gets replaced. A dragging door is often just rollers or a track adjustment. We’ll tell you honestly which path is cheaper before you commit. Call (888) 590-9867 for a free estimate.
How long does the swap take? A single component like a balance, operator, roller, or sweep is usually a short service visit once the correct part is in hand. A full window or door unit takes longer and depends on how many openings and whether the frame needs work. We’ll give you a real timeline on the written estimate. Call (888) 590-9867 to schedule.
How do you source the part? We identify your Mr-Glass series from the label or by measuring, then order either the OEM part or a quality aftermarket equivalent and explain the difference in price and fit. We don’t claim to stock parts or carry them on a truck; we get the right one matched to your unit. Call (888) 590-9867 for a free estimate.
When a Mr-Glass window or door part fails, the frame usually has years left. We’d rather match the right component to your unit and keep what’s working than sell you a whole wall of new windows. Barrett & Sons Construction Arlington installs the named brands you can look up – Andersen and Marvin on windows, GAF and CertainTeed on roofs, and we also work with KraftMaid, Cambria, and Silestone on kitchens and baths – with scope, allowances, and any change order in writing before work starts. Call (888) 590-9867 for a free estimate. A live person answers, day or night, and you can take $40 off any repair over $200, plus our permanent 10% senior and veteran discount.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.