A Barrett company - serving Arlington, TX
M

Mr-Glass Kitchen Remodeling in Arlington, TX

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mr-Glass Kitchen Remodeling: The Arlington Owner’s Guide

Mr-Glass-compatible kitchen remodeling in Arlington typically runs $14,000 – $45,000 installed, and you don’t need same-day service – this is planned work, not an emergency, so we schedule it properly and pull every permit before a single cabinet comes out. Most Arlington owners we meet don’t discover their Mr-Glass glass or door unit failed until a fogged double-pane, a door that won’t seat, or a seal that’s gone soft shows up during a kitchen remodel. That’s usually when they call, unsure whether the unit can be saved or has to be replaced as part of the job.

Call (888) 590-9867

Key takeaways:

  • Mr-Glass units in a kitchen remodel are usually replaced as part of the full scope, not patched mid-framing.
  • Installed kitchen remodels in Arlington run $14,000 – $45,000; small kitchen remodels land at $9,000 – $20,000.
  • Every scope and allowance arrives as a written change order before work moves.
  • We’re an independent contractor, not affiliated with Mr-Glass – but we service and install Mr-Glass-compatible product.

Which Mr-Glass Models This Applies To

Mr-Glass makes glazed and framed kitchen units – glass-front cabinet doors, interior window and pass-through glass, and door-and-drawer assemblies that show up in kitchens more than any other room. The model number lives on a manufacturer label, usually inside the cabinet box or along the door stile, plus a corner stamp on the glass itself. Write both down before you call anyone.

Here’s the compatibility gotcha most Arlington homeowners miss: Mr-Glass changed its hinge-bore spacing and frame profile on some cabinet-door lines, so a replacement door that measures right on width and height can still sit proud or bind because the cup depth is off by a millimeter or two. Measure the existing door thickness and the hinge cup diameter, not just the face dimensions. On the glass side, tempered versus laminated matters in a kitchen where a door swings near a hard counter edge.

OEM versus quality aftermarket: for structural frame pieces and any glass in a door that opens and closes daily, we source OEM-spec or a matched equivalent and put the part number on the written quote. For decorative glass panels sitting static in a frame, a quality aftermarket match is fine and often costs less. We don’t stock parts and we don’t carry parts on a truck – we source to your model number and confirm the match before ordering.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mr-Glass Kitchen Remodeling Is Failing

Most failures announce themselves slowly. Here’s what Arlington owners actually report:

  • Fogging or haze between glass layers. The sealed unit lost its seal and moisture got in – not a cleaning problem, and it won’t clear on its own.
  • A door that drags on the frame or won’t close flush. Usually a worn hinge or a frame that shifted. In our Texas heat-and-humidity swings, wood frames move more than owners expect, so a door that fit in March can bind by August.
  • Chips or cracks at the hinge or corner. Stress points fail first. A crack near the hinge bore is a glass failure waiting to spread, not a cosmetic mark.
  • A loose or rattling panel. Failed glazing points or dried-out sealant. Left alone it lets water into the frame, and once that wood swells the door never sits right again.
  • Discolored or clouded glass edges. Sealant breakdown at the perimeter, common in kitchens with heavy steam from cooking and dishwashing. This is the one owners most often mistake for dirt.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for the kitchen work around a Mr-Glass unit, calibrated to the Arlington market:

Scope Installed range
Full kitchen remodel $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the range: cabinet count and layout changes, whether walls move, countertop material (Cambria and Silestone price differently than stock laminate), and how the Mr-Glass unit integrates with new framing. Your quote breaks out parts and labor separately – parts line by line, labor line by line, allowances named on paper. Every job that needs a permit gets one pulled and inspected, and the work carries our written 90-Day Done Right Promise: if something isn’t right, one call brings us back. Call (888) 590-9867 for a free estimate.

DIY or Call Us?

Some of this you can check yourself safely. Open and close every Mr-Glass door, look for fog between the panes, run a finger along the glass edge for soft sealant, and note any drag or rattle. That tells you whether you have a glass failure, a hinge failure, or both.

Where it goes wrong: pulling a door off its hinges to “diagnose” the bind often cracks a stressed panel, and reseating a sealed unit without getting the frame dry and square just traps moisture and brings the fog back in a season. Tempered glass near a swinging door handles impact badly if the frame isn’t true. Once a seal is gone or a frame has swelled, it’s a rebuild, not a repair. Bring us the model number and photos, and call (888) 590-9867 – we’ll tell you straight whether it’s a part fix or a replacement.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch