Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Bathroom Remodeling: The Arlington Owner’s Guide
We handle Mr-Glass bathroom remodeling for Arlington homeowners, and most full bathroom projects land between $9,000 and $28,000 installed, with small baths running $5,000 to $12,000. We’re an independent contractor, not affiliated with Mr-Glass, so we quote the actual scope of your bathroom instead of a catalog price. Owners usually land here after spotting the first real problem: a shower door that won’t stay shut, a frameless panel that has slipped in its track, a mirror edge turning dark, or a glass-to-tile seam that has started weeping water into the wall behind the vanity. That’s the moment to get the part identified and the install scheduled, before the small failure becomes the expensive one.
Which Mr-Glass Models This Applies To
Mr-Glass built a lot of bathroom glass over the years, and the parts don’t cross over cleanly between product lines. Shower enclosures, tub-front sliders, pivot doors, fixed mirror panels, and framed vs. frameless assemblies each use different hardware geometry: hinge offsets, pivot-pin diameters, roller wheel widths, and threshold channel depths vary by series. A hinge for a 3/8-inch frameless door will not fit a 1/4-inch framed slider no matter how close the holes look.
The reliable way to identify your assembly is a label and a tape measure. Check the inner face of the frame, the top header channel, or the underside of the bottom track for a manufacturer’s sticker with a model or series code. If there’s no label, measure the glass thickness (1/4, 5/16, or 3/8 inch), the door width and height to the nearest 1/16 inch, and the pivot or hinge hole center-to-center spacing. Send us those numbers with a couple of photos and we’ll match the right part.
On the OEM-vs-aftermarket question, the honest answer is that it depends on the failure. For structural frame components (pivot hinges, header brackets, roller trucks on a frameless door), you want the OEM-spec part or a genuine equivalent. For wear items like sweep seals, vinyl glazing, and threshold gaskets, a quality aftermarket piece is fine and often better made than the original. We don’t stock parts and we don’t carry them on a truck; we source the right match for your specific assembly and bring it to the job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Bathroom Remodeling Is Failing
These are the symptoms we see most often in Arlington bathrooms, and each one points to a specific part you can name when you call:
- Door won’t stay closed or swings on its own. Worn pivot hinges or a bent header bracket. The hinge has lost its tension or the frame has shifted, so the door no longer hangs square in the opening.
- Rollers drag, jump the track, or grind. Collapsed roller wheels or a bent bottom track. In a framed slider, the wheels flatten over time and the track picks up grit, and the door starts to fight you.
- Water leaking around the base or at the door edge. Failed sweep seals, missing vinyl, or a threshold gasket that has hardened and pulled away. This is the one that quietly rots the subfloor if you leave it too long.
- Dark, cloudy, or peeling edge on a mirror panel. Moisture has gotten behind the silvering at the edge, usually from a bathroom with poor venting. The backing is failing and the spot will spread.
- Glass feels loose or the panel rattles. Loose glazing vinyl, a missing setting block, or a wall anchor that has pulled free from tile. Tile anchors in a shower take a beating from heat and steam cycles.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Our installed bathroom remodel pricing starts at $9,000 to $28,000 for a full Arlington redo, and the line items inside that range tell the real story:
- Full bathroom remodel: $9,000 – $28,000
- Small bathroom remodel: $5,000 – $12,000
- Walk-in shower installation: $4,500 – $12,000
- Tub-to-shower conversion: $3,500 – $10,000
- Shower replacement: $3,000 – $8,500
- Bathroom vanity installation: $800 – $3,000
The range moves on glass thickness (3/8-inch frameless glass costs more than a framed slider), tile work and waterproofing behind the glass, and whether we’re matching an existing enclosure footprint or reconfiguring. You get a written line-item quote: parts, labor, and materials spelled out. We pull permits and sign inspections on eligible jobs, and every price change comes as a written change order before any work moves. All of it is backed by the written 90-Day Done Right Promise.
DIY or Call Us?
Some of this an owner can safely check. You can measure the glass, photograph the label, tighten a loose shower door handle screw, replace a sweep seal that pulls straight out of its channel, and clean a track so you can see what’s actually worn. That’s real information worth having before you call.
Where DIY goes wrong is anything holding heavy glass. Frameless shower doors weigh 80 to 100 pounds, the pivot hinges and header brackets carry that load, and a mis-set anchor in tile can let a panel shift or drop. Replacing the wrong hinge set or drilling a second set of holes in a tempered panel can crack it outright. We’ve picked up the pieces on plenty of these, and tempered glass shatters into small sharp pieces when it lets go. If the glass needs to come off or the hinges need replacing, let us handle it. Call (888) 590-9867 and we’ll get a look at it. Estimates are free, and the $40 Off Any Repair Over $200 standing offer applies to qualifying jobs.
FAQs
Frameless shower glass itself lasts decades, but the hardware and seals around it don’t. Pivot hinges and roller wheels typically give 8 to 12 years before they wear or lose tension, and sweep seals and threshold gaskets go in 3 to 5 years because North Texas heat and a shower running hot and cold cycles through them fast. Matching the right seal and hinge spec extends that life considerably.
Often yes. A dragging roller just needs new wheels, a leaking door usually needs a fresh sweep seal and threshold gasket, and a loose hinge can sometimes be re-set if the frame and anchor are still sound. A glass panel with a chipped edge or a mirror with edge corrosion cannot be repaired, though; that has to be replaced. Call (888) 590-9867 and we’ll tell you which side of that line your part is on. Estimates are free.
A seal, hinge, or roller swap is typically a couple of hours once we have the right part in hand. A full shower replacement runs a few days depending on tile and waterproofing. We quote the timeline in writing before we start, so there’s no guessing about how long your bathroom is out of service.
From your label and measurements. Send us the model or series code if it’s there, plus glass thickness, door dimensions, and hinge hole spacing, and we match the correct OEM-spec or quality aftermarket equivalent. We don’t stock parts and we don’t carry them on a truck; we order the specific match for your assembly. Call (888) 590-9867 to get started.
If your Mr-Glass bathroom glass is failing, the fix usually comes down to one worn part and a couple hours of labor. Call Barrett & Sons Construction Arlington at (888) 590-9867 for a free estimate. We’ll measure, identify the part, and give you a written quote with no surprise invoices. We also install KraftMaid, Cambria, and Silestone bathroom cabinetry and surfaces, and we’re happy to look at a full remodel while we’re there. Proudly serving Arlington and the surrounding counties with permitted, inspected work and our 90-Day Done Right Promise.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.