A Barrett company - serving Arlington, TX
M

Mr-Glass Home Additions & ADU in Arlington, TX

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mr-Glass Home Additions & ADU: The Arlington Owner’s Guide

A Mr-Glass-compatible home addition or ADU in Arlington typically runs $45,000 – $130,000 installed, depending on size, finish level, and whether the unit is attached or detached; garage conversions start lower, at $30,000 – $80,000, and full ADUs can reach $90,000 – $220,000. Detached ADUs and additions are planned work, not same-day work – figure on a scheduling and permitting window measured in weeks. We’re an independent builder and not affiliated with Mr-Glass, so we match their window, door, and glazing systems to your build rather than selling you a house-brand substitute.

Call (888) 590-9867

Owners usually discover a failing Mr-Glass component in a new or aging addition the same way: a fogged double-pane unit you can’t see through, a patio door that won’t slide true after two summers, or a window frame that’s weeping water onto fresh drywall. In Arlington, the trigger is often the summer heat load on a west-facing glazed wall.

Key Takeaways

  • Installed range for a Mr-Glass-compatible addition in Arlington: $45,000 – $130,000; ADUs: $90,000 – $220,000; garage conversions: $30,000 – $80,000.
  • Pricing is plan-based, not phone-guess-based – we quote from a written scope.
  • Every price change arrives as a written change order before work moves.
  • We install the premium brands across every trade: KraftMaid and Cambria in kitchens, GAF and CertainTeed on roofs, Andersen and Marvin on windows, Belgard and Techo-Bloc on hardscapes.

Which Mr-Glass Models This Applies To

Mr-Glass builds its additions and ADUs around a window, door, and glazing system, and the part that fails is almost always the unit itself – the insulated glass pack, the door roller and track, or the frame and flashing detail. Before we quote, we identify what you actually have. The model and series data lives on a label on the window or door frame, usually the jamb or the top of the sash, plus the glass spacer stamp between the panes. Get us a photo of that label and the rough opening measurements, and we can match the replacement.

Here’s the compatibility gotcha most owners miss: Mr-Glass units are built to order around the opening, so a big-box “close enough” sash won’t land square in a Mr-Glass frame – the glazing thickness and spacer depth have to match the series, or the unit racks and the seal fails early. OEM vs. aftermarket for Mr-Glass specifically: the OEM insulated unit gives you an exact drop-in fit and the cleanest warranty path; a quality aftermarket glass pack with matching specs costs less and works fine when measured right. For frames and hardware, the OEM or a spec-matched equivalent is the safer call. We don’t carry parts on a truck or hold stock – we source to your measured spec and bring the right piece to the job.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mr-Glass Home Additions & ADU Is Failing

  • Fogging or condensation between the panes. The seal on the insulated glass unit has broken and moisture has entered the spacer – that’s a failed unit, not a cleaning problem.
  • A patio or entry door that drags or won’t latch. The roller, track, or hinge has worn or the frame has shifted; in Arlington’s clay soils, foundation movement shows up here first.
  • Water staining or soft drywall at the frame corners. Flashing or sealant around the opening has failed and water is getting behind the finish – catch it before the framing gets wet.
  • A draft or a hot wall you can feel by hand. The weatherstripping or the glass performance has degraded, and your cooling bill tells the story before you see it.
  • Cracks, chips, or a sash that binds. Impact or thermal stress has damaged the glass or the frame has warped; either way the unit has to be measured fresh.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

This page’s lead range for a Mr-Glass-compatible addition or ADU build in Arlington is $45,000 – $130,000. Smaller line items sit inside a build like this: a garage conversion runs $30,000 – $80,000, a detached ADU $90,000 – $220,000. A single failed window or door component is priced separately as a repair or replacement. What drives the range: square footage, whether the unit is attached or detached, site and foundation conditions, and finish level on the interior.

Parts and labor are quoted transparently, line by line. Every scope and allowance is written, and any price change lands as a written change order before a nail moves. Permits are pulled and inspections signed on every eligible job, and the work carries our 90-Day Done Right Promise – one call brings Tom back.

DIY or Call Us?

You can safely check the label and rough opening, take photos, and note where water is showing up. You can also hand-test for drafts and drag. That’s it – and here’s why: replacing glass in a framed opening and re-flashing a wall are not weekend projects, and a bad seal or a missed flashing step lets water into the structure where you won’t see it for a year. Get the diagnosis and the measurement right the first time by calling (888) 590-9867. A live person answers, 24/7. Estimates are free, and if you already have a written estimate, we’ll give you a free second opinion.

FAQs

How long should a Mr-Glass window or door unit last in Arlington? A properly installed insulated unit typically holds its seal for 15 to 20 years, but Texas summer heat and sun on a west-facing wall shorten that – plan on earlier failure on the hottest exposures, and address fogging or a dragging door as soon as you spot it. Call (888) 590-9867 for an exact quote on your unit – estimates are free.

Can a failed unit be repaired instead of replaced? Sometimes yes – a worn roller, hinge, or weatherstripping can be repaired, and a fogged glass pack can be swapped on its own without a whole new frame. Whether repair or replacement wins depends on what we measure. Call (888) 590-9867 and we’ll tell you honestly which way to go.

How long does the swap take? A single window or door component swap is usually a short visit once the measured part is in hand; a full addition or ADU is scheduled work measured in weeks, planned around permits and inspections. We’ll give you the timeline in the written scope, not over the phone. Call (888) 590-9867 for a free estimate.

How do you source the Mr-Glass part? We measure your opening and read the frame label to match the series, then source the measured part – OEM for the cleanest fit or a spec-matched equivalent for savings. We don’t stock parts or carry them on a truck; we bring the right one. Call (888) 590-9867 to schedule your free estimate.

Barrett & Sons Construction Arlington builds additions and ADUs the way you’d want your own done: written scope, written allowances, written change orders, permits pulled, and a name on the contract you can look up. Proudly serving our local communities for over 29 years and owner-operated with Tom and his sons on-site most days, we back every completed job with the 90-Day Done Right Promise. Our crew members are background-checked and uniformed on every visit. Standing offers you can count on: $40 Off Any Repair Over $200, a Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount. Call (888) 590-9867 for a free estimate.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch