A Barrett company - serving Arlington, TX
T

Therma-Tru Roofing in Arlington, TX

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Therma-Tru Roofing: The Arlington Owner’s Guide

Therma-Tru is a door and entryway brand, not a roofing manufacturer. That one fact reshapes this whole page. If you’ve been searching for “Therma-Tru roofing” in Arlington, what you almost certainly have is a Therma-Tru door, sidelight, or transom under a porch roof, a gable overhang, or a low entry canopy – and the roofing or flashing detail above it has failed, letting water track down onto the Therma-Tru frame and sill. We handle the roof-side repair and the door-side trim so the water stops where it starts. Roof repair in Arlington runs $400 – $1,800 for the kind of localized flashing and shingle work these entries usually need, and most non-emergency calls get scheduled within a few days.

Call (888) 590-9867

Owners usually find this the same way: a dark stain spreading across the ceiling inside the entry, paint blistering on the soffit above the door, or water standing on the Therma-Tru threshold after a hard Texas storm. Sometimes it’s simpler – the door starts sticking in humid weather because the header above it has been wet for months.

Which Therma-Tru Models This Applies To

Therma-Tru’s entry systems – the Fiber-Classic, Smooth-Star, and Classic-Craft lines among them – are commonly installed under porch roofs, porticos, and recessed entry alcoves where a small roof or overhang sits directly above the door head. Those porch roofs, and the flashing where they meet the wall, are what fails. The door itself is rarely the problem; the water management above it is.

To identify what you’re working with, open the door and look at the hinge-side jamb label or the top of the slab for the model and series information. Measure the rough opening and the door slab width, not just the visible trim – the flashing and roof repair gets sized to the actual opening and the wall assembly around it, not to the door’s face dimensions. On the roofing side, your part is a piece of the roof system: step flashing, a cricket or diverter, replacement shingles or a membrane, and new sealant at the wall-to-roof transition.

OEM versus aftermarket is less of a question here than it is for door hardware. The roofing materials above a Therma-Tru entry don’t need to be Therma-Tru-branded – they need to match your existing roof’s profile, color, and exposure so the repair disappears into the field. We source matching shingles and flashing from the same manufacturers already on your roof. If your home also has KraftMaid, Cambria, or Silestone finishes inside, those are trades we cover too, but they don’t enter this repair.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Therma-Tru Roofing Is Failing

  • Water staining on the ceiling or wall beside the entry. This means moisture has been getting past the flashing above the door for a while. By the time you see the stain inside, the leak has usually been active through at least one rainy season.
  • Peeling or bubbling paint on the soffit or fascia above the Therma-Tru door. Trapped moisture pushes paint off from behind. That’s a flashing or sealant failure, not a paint problem, and repainting over it just hides it until the next storm.
  • Water pooling on the threshold or sill after rain. A missing or short drip edge, a settled porch roof, or a failed pan flashing lets water run back toward the door instead of away. Left alone, it works into the sill and the framing below.
  • The door sticks, swells, or drags in humid weather. North Texas humidity plus a wet header above the opening causes the frame to move. If the door only sticks after rain, suspect the roof detail above it before you touch the hinges.
  • Visible gaps, cracked sealant, or lifted shingles at the wall-to-roof transition. Sealant around a porch roof in Arlington takes a beating from summer heat cycling past 100°F and spring hail. Cracked sealant and lifted step flashing are the earliest visible warning you’ll get.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roof repair around a Therma-Tru entry in Arlington typically lands between $400 and $1,800 installed, depending on how much flashing and roofing has to come off and whether the damage reaches the sheathing or framing. A straightforward flashing replacement and shingle patch sits at the low end. If we open it up and find rotted decking or a wet header, the scope grows – and that growth arrives as a written change order before we touch it, not as a surprise line on the final invoice.

What’s included: tear-off of the failed section, new step or pan flashing, matching roofing material, sealed wall transitions, and cleanup. Our crew members have up to 28 years of experience with this kind of detail work, and every eligible job gets permits pulled and inspections signed where the scope requires it. The work is covered by our written 90-Day Done Right Promise – if it’s not right, Tom comes back and makes it right, one call. If you have a written estimate from another roofer, we’ll give you a free second opinion on it.

DIY or Call Us?

You can safely check a few things yourself: look for staining on the ceiling and soffit, note where water pools on the threshold after rain, check the sealant line at the wall-to-roof joint from the ground with binoculars, and photograph any lifted shingles. That information helps us quote accurately.

What you shouldn’t do is climb up and reflash or patch a porch roof above a door opening. Roof work at height is where homeowners get hurt, and a patch that looks sealed can trap water and rot the header behind your Therma-Tru frame – turning a $600 repair into framing work. Step flashing has to be layered and integrated correctly with the shingles and the wall, and getting that wrong is common. That’s the part we do. Call (888) 590-9867 for a free estimate.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch