A Barrett company - serving Arlington, TX
T

Therma-Tru Fence Installation in Arlington, TX

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Before the page, one honest note about the brand pairing itself, because the reader will hit it too. Therma-Tru is a door brand. Glass, fiberglass and steel entry doors, patio door systems, decorative glass and door hardware. It is not a fence manufacturer and does not publish fence parts catalogs, model series or compatibility charts. The page prompt asks for a Therma-Tru fence parts page, so below we’ve written the most useful possible version: a fence resource for Arlington owners who arrived expecting to match Therma-Tru parts to a fence job, plus the Therma-Tru door side of the house that most of these searches really come from. No invented Therma-Tru fence models, part numbers or specs. If you’d rather we build the page as a straight Therma-Tru entry door and hardware install page, say so and we’ll rework it.

Therma-Tru Fence Installation: The Arlington Owner’s Guide

Therma-Tru doesn’t make fences, so there’s no Therma-Tru fence part to match or replace. What Arlington homeowners usually need is one of two things: a fence built or rebuilt with the same written scope, permits and warranty standards they’d expect from a door brand of Therma-Tru’s reputation, or a Therma-Tru door part matched correctly to their door. Therma-Tru-compatible fence work and door parts both run through the same project pricing here, and fence installation in Arlington typically lands between $3,500 and $9,000 installed, depending on material, linear feet and gate count.

Call (888) 590-9867

Owners usually find us one of two ways. The first is a sagging gate, a leaning post or a run of pickets pulling loose after a Texas storm, and a search that starts with a brand name because that’s the name on the door and the last thing they trust. The second is a Therma-Tru entry door where the deadbolt won’t line up, the weatherstrip is shot, or the threshold is letting water in, and the owner assumed the fence company could handle it. We handle the door hardware and threshold side of that. Neither situation is an emergency, and neither is a project you should rush into with a phone quote.

Which Therma-Tru Models This Applies To

Therma-Tru’s product lines are entry doors, patio door systems and door components. Their well-known lines include fiberglass entry systems, steel entry doors and decorative glass and sidelite options. There are no Therma-Tru fence series, and no compatibility chart exists, because there’s no fence product to chart. If a supplier or a salesperson tells you a part is “Therma-Tru spec” for a fence, ask for the model line and the spec sheet in writing. That’s the same rule Tom Barrett uses on every kitchen and window job, and it applies here.

For a fence job, the parts that actually matter are post anchors, rail brackets, gate hardware and picket fasteners. Those are matched to your fence material (cedar, treated pine, vinyl, aluminum or ornamental steel), not to a door brand. If your real problem is a Therma-Tru door, the part that matters is usually the lockset, the multipoint hardware, the sill or the weatherstrip. Identify it by the sticker inside the door jamb, the hinge plate, or by measuring the backset (the distance from the door edge to the center of the bore hole, typically 2-3/8 or 2-3/4 inches) and the door slab thickness. Take a photo of both before you call anyone.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Therma-Tru Fence Installation Is Failing

  • Gate sags or drags on the ground. The hinge screws have pulled out of the post, or the post itself has shifted. In North Texas clay soil, a post set less than 24 inches deep will heave within two or three summers, and most of the gate failures we see in Arlington start there, not at the hinge.
  • Posts lean after heavy rain. Water is pooling at the base and the soil is expanding and contracting around the post. It’s usually a drainage problem as much as a setting problem, and adding a concrete collar without fixing the drainage just delays it.
  • Pickets are warping or cupping. On cedar and treated pine in Arlington’s summer heat, this is expected within 8 to 12 years without a stain or seal cycle. On vinyl, cupping usually means the panel was installed too tight against the rail with no room for expansion.
  • Rails are pulling away from posts. The fasteners were undersized or the rail bracket wasn’t rated for the wind load. A fence run facing an open field on the west side of Arlington takes more wind than one tucked behind a row of houses, and it should be braced accordingly.
  • Rust streaks or loose hardware on aluminum or steel. The fasteners were a different metal than the fence, and galvanic corrosion is eating them. It’s a small fix now and a whole-panel replacement later.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Fence installation in Arlington runs $3,500 to $9,000 installed. That’s the range we quote from, and it holds across material types because the driver isn’t the material alone, it’s linear feet, gate count, post depth, tear-out and haul-off, and whether the old fence has concrete footings that need to be broken out. A short run of fence with one gate at the low end, a long property line with two or three gates and a full tear-out at the high end.

For Therma-Tru door parts, we quote the part and the labor separately on the written estimate, so you can see exactly what the hardware costs versus what it costs to install it. If your fence repair is small, the $40 Off Any Repair Over $200 standing offer applies, and the 10% Senior and Veteran discount is permanent and stacks with it where eligible.

Every fence job gets a written scope, written allowances, and a written change order before any price changes, plus the 90-Day Done Right Promise on the work. Permits are pulled and inspections signed on every eligible job in Arlington; we’ve seen too many fences built without them because the last contractor told the homeowner permits were optional.

DIY or Call Us?

You can safely check a lot of this yourself. Walk the fence line and push on each post. Photograph the failing gate hinge and the door jamb sticker on your Therma-Tru door. Measure the gate opening and the fence height. Those are the exact details that make a phone estimate accurate instead of a guess. What you shouldn’t do yourself is reset a post in clay soil without knowing the depth and the drainage, or replace a Therma-Tru lockset or multipoint hardware without matching the backset and the door handing exactly.

If a gate is dragging or a post is loose, call us at (888) 590-9867. A live person answers, day or night, and we’ll tell you whether it’s a repair or a rebuild before anyone comes out.

FAQs

How long does a fence last in Arlington?
Cedar and treated pine typically hold up 12 to 20 years with regular staining and proper post depth; vinyl and aluminum often outlast that. The post setting matters more than the material anywhere in North Texas where the clay soil moves with the seasons.

Can a failing fence be repaired instead of fully replaced?
Often, yes. A sagging gate, a single loose post, or a warped run of pickets is usually a repair, and repairs over $200 qualify for $40 off. If more than a third of the posts are loose or the rails are pulling across multiple sections, a rebuild is usually the better number. Call (888) 590-9867 and we’ll tell you which it is before we touch anything.

How long does fence installation take?
A typical Arlington residential fence takes one to three days for install, plus tear-out if the old fence needs to come down. If a permit is required, that adds time on the front end, and we handle pulling it and scheduling the inspection.

How do you source the fence material and any Therma-Tru door parts?
We work with the same supplier network that supplies our other trades, and every brand we install is one you can look up yourself. For Therma-Tru door hardware, we match the part to your door’s model line and backset, and it goes on the written estimate with the part cost separated from the labor. No mystery parts and no mystery invoices.

Are you affiliated with Therma-Tru?
No. Barrett & Sons Construction Arlington is an independent contractor and is not affiliated with Therma-Tru. We install and service Therma-Tru doors and hardware, along with KraftMaid, Cambria and Silestone on the interior side, but the Therma-Tru name belongs to Therma-Tru.

Call (888) 590-9867 for a free estimate. No trip charge inside the county, and a free second opinion on any written estimate you already have in hand.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch