A Barrett company - serving Arlington, TX
T

Therma-Tru Home Additions & ADU in Arlington, TX

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Therma-Tru Home Additions & ADU: The Arlington Owner’s Guide

We build home additions and ADUs in Arlington with Therma-Tru exterior door packages spec’d into the plan, and a finished addition runs $45,000 – $130,000 depending on size, foundation, and how much exterior door and sidelite work the plan includes. ADUs land higher, at $90,000 – $220,000. This is planned construction, not emergency work, so we schedule it properly rather than pretending a stick-built addition happens overnight.

Call (888) 590-9867

Owners usually come to us after something else went wrong first. They had a Therma-Tru door or entry system installed in a sunroom or garage conversion, and two or three summers later the door won’t latch, the threshold is holding water, or the finish on a Therma-Tru entry has gone chalky and rough. That’s when they start asking whether the addition itself was built to take a real exterior door, or whether the door was an afterthought bolted onto a wall that moves. In Arlington, clay soil and hundred-degree summers find every weak joint in an addition, and the entry door is usually where the weakness shows first.

To be clear: Barrett & Sons Construction is an independent builder. We’re not affiliated with Therma-Tru.

Which Therma-Tru Models This Applies To

Therma-Tru entry doors turn up in our Arlington addition projects most often as Fiber-Classic and Smooth-Star, with the occasional Classic-Craft on higher-end builds. Fiber-Classic has the wood-grain texture and the classic ovolo sticking; Smooth-Star is flat and smooth, and it’s the one we see most in garage conversions and utility entries where the plan calls for a simple, paintable slab. The two are not interchangeable on a prehung unit, so the first job is identifying what you actually have.

Here’s how to identify it. Pull the door open and look at the hinge jamb, near the top hinge. Therma-Tru puts a label there with the series and the unit size. If the label is gone, measure the slab: width, height, and thickness. Standard is 1-3/4 inches thick, and a 36-inch slab measures a true 35-3/4 inches across. Write those numbers down before you call anyone.

The OEM-versus-aftermarket question matters more here than on most parts. Therma-Tru builds its own sills, sweeps, and hinge systems to its own dimensions, and a generic replacement threshold that “fits a 36-inch door” often doesn’t sit correctly in a Therma-Tru sill pan. We source OEM where the part is structural to the door and a quality equivalent only where it genuinely doesn’t affect the seal. On an addition, the exterior door is the one place in the envelope where a half-inch matters.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Therma-Tru Home Additions & ADU Is Failing

Most of what goes wrong with a Therma-Tru entry in an Arlington addition traces back to water, movement, or both. Here’s what to watch for.

  • The door won’t latch without a shove. The addition has settled, or the hinge jamb has swelled. In Arlington’s clay, a slab-on-grade addition can move enough in a dry summer to throw a strike plate off by an eighth of an inch, which is all it takes.
  • Water in the threshold or a soft spot at the interior corner. The sill pan wasn’t integrated with the addition’s flashing during the build, or the exterior grade has risen against the threshold. Both send water into the wall cavity behind the door frame.
  • The bottom sweep is dragging or gone. Sweeps wear out on south- and west-facing entries faster than anywhere else in the house. A worn sweep lets in water, insects, and hot air, and it’s one of the few parts you can reasonably swap yourself.
  • The finish is chalky, peeling, or rough to the touch. Texas UV is hard on any painted or stained exterior surface. A Therma-Tru Fiber-Classic that hasn’t been recoated in several years will show it, and once the finish breaks down, the door takes on moisture.
  • Daylight visible around the perimeter of a closed door. Weatherstripping has compressed, the door has warped, or the addition’s opening was framed out of square. This one needs a real diagnosis, because swapping the strip won’t fix a racked frame.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For an Arlington addition project, the headline ranges are $45,000 – $130,000 for a home addition and $90,000 – $220,000 for an ADU. A garage conversion sits between them at $30,000 – $80,000, and that’s often where a Therma-Tru entry door enters the picture, since the conversion needs a proper exterior-rated door and a clean threshold detail.

What drives the range: foundation and slab work, framing and roof tie-in, electrical and mechanical runs, insulation and drywall, and the exterior door and window package. A Therma-Tru entry with sidelites and a proper sill pan belongs in the door and window line of the quote, spelled out, not bundled into a lump sum.

Every scope, allowance, and price change comes to you as a written change order before work happens. No surprise invoice at the end. Permits are pulled and inspections signed on every eligible job, and the whole thing carries our 90-Day Done Right Promise in writing. Cabinetry and counters in an addition’s kitchenette are usually KraftMaid and Cambria, with Silestone as an alternate, and we spec brands you can look up.

DIY or Call Us?

You can safely check a lot of this yourself. Look for the Therma-Tru label on the hinge jamb, measure the slab, check the threshold for standing water after a rain, run your hand along the bottom sweep, and look for daylight around a closed door. None of that requires a tool.

Where owners get into trouble: adjusting a hinge or strike plate to compensate for a settled addition, re-caulking a threshold that’s already letting water into the wall, or pulling a door out of a rough opening that wasn’t flashed correctly in the first place. That last one turns a door problem into a framing and water-damage problem fast. On an addition, treating the door as an isolated part is the mistake.

If you’re weighing a repair against a full build, call us at (888) 590-9867. Estimates are free, and the second opinion on a written estimate you already have costs you nothing.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch