Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Fence Installation: The Arlington Owner’s Guide
Barrette fence installation in Arlington typically runs $3,500 to $9,000 installed, depending on fence style, linear footage, gate count, and whether we’re replacing a full run or matching into existing panels. Here’s the honest answer on timing: a planned Barrette install or replacement is usually scheduled within a few weeks of your estimate, not same-day. This isn’t an emergency call. It’s a job you want done in daylight, with the right posts set to the right depth.
Most Arlington owners we meet didn’t go looking for a Barrette problem. They found one. A gate that sagged after the last big rain. A picket that popped loose in a windstorm. A post that started leaning toward the neighbor’s yard after two summers of North Texas clay doing what North Texas clay does. You notice it on a Saturday morning walk-around, and by Monday you’re online trying to figure out which Barrette series you actually have and what it’ll cost to fix it right.
Key Takeaways:
- Barrette vinyl and composite fence installs in Arlington run $3,500 to $9,000 for most residential jobs.
- Texas heat and expansive clay soil are the two biggest killers of fence posts here.
- We’re an independent contractor, not affiliated with Barrette, and we don’t stock parts on a truck.
- Every price change gets a written change order before work moves.
- Call (888) 590-9867 for a free estimate. A live person answers, day or night.
Which Barrette Models This Applies To
Barrette makes a wide spread of vinyl and composite fencing, and knowing which line you have matters before anyone orders a single panel. The common residential lines you’ll run into across Arlington are the Barrette Outdoor Living vinyl privacy styles (often sold under names like Brookline, Fairfield, and similar series at big-box stores), the composite lines, and the ornamental aluminum options. Each series has its own post dimension, rail spacing, and picket profile. A Brookline picket is not a Fairfield picket. A 5-inch post cap will not sit on a 4-inch post.
Here’s how to identify yours before we quote. Look for a stamp or label on the inside of a rail or the back of a post, usually a small printed tag or a molded-in marking. Measure your post width at the base and at the top, because Barrette uses both nominal and actual dimensions and they don’t always match. Measure rail-to-rail spacing and picket width to the sixteenth. Take a photo of the top cap and the gate hardware. If there’s no label, those measurements are usually enough for us to match the series.
On the OEM-versus-aftermarket question: for Barrette specifically, we recommend matching the original series when you’re replacing a single panel or a section. The color lots vary slightly between production runs, and a mismatched panel against a ten-year-old fence shows. When you’re replacing a full run, you have more flexibility, and we’ll talk through the trade-offs honestly.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Fence Installation Is Failing
Most failures here aren’t mysterious. They’re predictable, and they follow the same pattern we see on fence calls across Arlington, from the older neighborhoods near downtown out to the newer subdivisions on the city’s south and east sides.
- Posts leaning after heavy rain. Arlington’s expansive clay soil swells when wet and shrinks when dry, and a post set in shallow concrete or without proper depth will rock and lean within a few seasons. This is the most common failure we see, and it’s a footing problem, not a post problem.
- Gate sagging and dragging. Hinges loosen, gate posts shift, and the diagonal brace (if there is one) was undersized for the gate width. A gate over 4 feet wide needs a heavier post and a proper brace to hold its shape.
- Pickets popping out of rails or coming loose. Barrette uses a friction-fit or channel insert on many of its picket profiles. When the rail expands in summer heat and contracts in winter, pickets can work loose. UV exposure over 10 to 15 years also makes vinyl brittle, and a brittle picket cracks instead of flexing.
- Rails cracking or bowing between posts. This is usually a span problem. If the original install stretched a rail beyond the manufacturer’s recommended post spacing, the rail carries more load than it was designed for, and Texas heat makes the sag worse every summer.
- Yellowing, chalking, or fading on the sunny side. Vinyl fence in Arlington takes brutal UV through July and August. Fading and surface chalking are normal aging, but if the fading is uneven or a section looks markedly different from the rest, that’s a sign of a mismatched panel or a replacement that wasn’t color-matched.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Arlington, Barrette fence installation runs $3,500 to $9,000 for a typical residential job. That range covers the panel and post work itself, the labor to set footings, and the cleanup. Here’s what drives the number up or down:
| Item | Arlington Range |
|---|---|
| Single section or panel replacement | $350 – $800 |
| Gate rebuild or rehang | $400 – $900 |
| Post reset or replacement (per post) | $250 – $600 |
| Full Barrette fence installation | $3,500 – $9,000 |
What’s inside the range: linear footage, fence height (6-foot privacy costs more than 4-foot), gate count and width, whether the old fence needs full removal and haul-off, and soil conditions on your lot. If your posts need deeper footings because of clay, that’s a real cost, and we’ll tell you upfront rather than surprise you. We don’t stock parts, so material lead time is part of the schedule, not an afterthought. Every change that touches scope gets a written change order before we move. The work is backed by our 90-Day Done Right Promise, and every eligible job gets permits pulled and inspections signed.
DIY or Call Us?
For Barrette fence work, the honest split is this. You can safely check your fence yourself: walk the line, push on each post at the top to feel for movement, inspect the pickets and rails for cracks, look at your gate for sag, and photograph any label or stamp so we can identify the series. That’s all useful, and it saves time on the estimate.
Where DIY goes wrong is the footing. Digging a post hole by hand, mixing concrete, setting the post at the right depth for Arlington’s clay, and getting it plumb in both directions is harder than the videos make it look. And if you’re working on a gate post, the load bearing on that single post is heavier than any other post in the run, so a footing that fails there takes the whole gate with it. There’s no high-tension spring or live electrical wire in a vinyl fence, so the safety risk here isn’t catastrophic, but a leaning fence can fall on a person or a vehicle, and a poorly set post is a fence that fails in two years instead of twenty.
If you’ve got the fence apart and you’re not sure what you’re looking at, call us. We don’t take a trip charge inside the county. Call (888) 590-9867 and we’ll talk it through.
FAQs
Most Barrette vinyl and composite fence lines last 20 to 30 years in Arlington with proper footing, though UV exposure and clay soil will shorten that if posts weren’t set deep enough. A fence set in shallow concrete on expansive clay can start leaning in five to seven years. Call (888) 590-9867 for an exact quote on your fence – estimates are free.
Often yes, especially for a single cracked picket, a popped rail, or one sagging gate. If the posts are solid and the surrounding panels are intact, we can typically replace just the damaged section. If the posts are leaning, the repair won’t hold, and that’s a footing job, not a panel job. Call (888) 590-9867 and we’ll tell you which one you’re looking at.
A single panel or gate takes a few hours; a full residential run in Arlington usually takes one to three days depending on footage, gate count, and whether the old fence needs removal. We schedule around weather, because a wet week here will slow down footing work. Call (888) 590-9867 to schedule your free estimate.
We source the matching Barrette series from authorized suppliers based on the measurements and label you provide at the estimate. We don’t carry parts on a truck, so lead time matters, and we’ll tell you that upfront in the written quote rather than promise a date we can’t keep. Color lots vary between production runs, so we match when we can and tell you when we can’t. Call (888) 590-9867 for a free estimate.
Barrett & Sons Construction Arlington is an independent contractor and is not affiliated with Barrette. We install and repair Barrette fence systems the same way we handle the other premium brands we work with – KraftMaid, Cambria, and Silestone among them – with the scope, the allowances, and the price all in writing before we start. Our crew members have up to 28 years of experience, and you’ll see the same faces on your job from start to finish.
If your Barrette fence is leaning, sagging, or on its last legs, call (888) 590-9867 for a free estimate. A live person answers the phone around the clock, not a voicemail box. We’ll walk your property, measure the fence, identify the series, and put a written quote in your hands – no surprise invoices, no phone price that changes at the door. You can also ask us about our $40 Off Any Repair Over $200 offer, our Free Second Opinion on Any Written Estimate, and the permanent 10% Senior & Veteran discount. If you’re not sure whether it’s a repair or a full replacement, we’ll tell you straight. That’s how we’ve done it since 1998, and it’s why the same neighbors keep calling back.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.