Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Master Halco Driveway & Pavers: The Arlington Owner’s Guide
We install Master Halco-compatible driveways and paver work in Arlington, and most full paver driveway projects here run $7,000 – $18,000 installed, depending on square footage, base prep, and whether we’re tearing out old concrete first. If you’re replacing a single failed section or resetting a settled run, the scope is smaller and we can usually get eyes on it within a few days. Call (888) 590-9867 for a free estimate with line-item pricing.
Owners in Arlington usually find the problem the same way: a paver edge lifts after a hard freeze, a section of driveway sinks toward the street, or weeds start pushing up through joints that were tight two summers ago. Sometimes it’s a retaining wall that starts leaning after a wet spring. Master Halco makes the edging, jointing, and paver systems that hold this work together, and when one component gives out, the whole run starts to move.
Which Master Halco Models This Applies To
Master Halco is best known in North Texas for fence hardware, but their driveway and hardscape line includes paver edging profiles, joint sand, and structural components that show up on residential drives across Arlington. The trick is knowing which system you have before ordering anything.
- Paver edging profiles – sold in rigid and flexible styles, usually in 8-foot sections, with specific stake patterns. Older drives sometimes have the discontinued rigid profile, and the flexible replacement won’t hold the same load line.
- Jointing sand and polymeric fills – Master Halco distributes several grades. The fine-grain sand sold for narrow joints won’t stabilize a wide-joint paver system, so measure your joint width before buying.
- Base and bedding components – crushed stone and bedding sand supplied through Master Halco dealers carry specific gradation specs that matter more in Arlington’s clay soils than most homeowners realize.
To identify what you have, pull a loosened edge piece and look for the stamped profile code on the underside, or measure the edging height (typically 1-1/2 to 2 inches) and the stake spacing. Your original install contract, if you still have it, will name the system. If not, a photo of the exposed edge is usually enough for us to match it.
On OEM versus aftermarket: for edging and structural components, we recommend staying with Master Halco-spec parts because the stake and interlock dimensions are proprietary. For joint sand and base material, a quality local equivalent is fine and often cheaper. We’re an independent service provider, not affiliated with Master Halco, so we can walk you through both options honestly.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Master Halco Driveway & Pavers Is Failing
- Edge pavers lifting or rotating. The edging restraint has failed or the stakes pulled loose. Once the edge moves, the interior field starts to spread within a season.
- Sections sinking or dipping toward the street. Base compaction was too thin or the bedding sand washed out. Arlington’s clay expands and contracts hard with our wet-dry swings, and a shallow base gives up fast.
- Joint sand washing out after rain. The polymeric fill has broken down or the wrong grade was used. Without locked joints, water gets under the pavers and the whole system weakens.
- Weeds and grass pushing through joints. A sign the joint fill has failed entirely and organic material is collecting in the gaps. Surface-level weeding doesn’t fix it.
- Standing water or puddling on the drive. The slope has settled or the drainage path was never right. Water sitting on pavers in Arlington’s freeze-thaw cycles is what causes heaving the next winter.
In Arlington, we regularly see edge failures after the first hard freeze of the year, especially on drives installed with flexible edging on clay base. The pattern is predictable once you know to look for it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what this work actually costs in Arlington, with parts and labor both included:
| Scope | Installed Range |
|---|---|
| Paver driveway installation (full) | $7,000 – $18,000 |
| Paver driveway reset or partial replacement | Usually well under the full-install range, depends on square footage |
| Paver patio installation | $3,500 – $11,000 |
| Driveway sealing | $250 – $700 |
What moves the number: square footage, base depth needed, whether old concrete gets torn out, drainage corrections, and the edging system spec. Every scope and every price change arrives as a written change order before work starts, so the number on the estimate is the number on the invoice. Permits are pulled where Arlington requires them, and inspections are signed. The work carries our written 90-Day Done Right Promise – if something’s not right, one call brings Tom back to fix it.
DIY or Call Us?
Some of this is genuinely checkable yourself. You can walk the drive and look for lifted edges, press a screwdriver into the joint sand to test how loose it is, and watch where water pools after a rain.
What goes wrong on your own: resetting pavers without recompacting the base, reusing failed edging, or using the wrong joint sand grade. A paver driveway is a system, and replacing one piece without addressing the base and restraint just delays the next failure. On clay soil like Arlington’s, a bad reset can move again within a single season.
We’re not going to oversell it – this isn’t dangerous work the way a garage spring is. But it is labor-intensive, and the base prep is where most homeowner attempts fall short. Call (888) 590-9867 and we’ll give you a written estimate with line-item pricing. The Free Second Opinion on Any Written Estimate offer stands if you’ve already got a bid in hand.
FAQs
A properly installed paver driveway with the right base and edging should hold 25 to 30 years, but in Arlington’s clay soils and freeze-thaw swings, edge restraint and joint fill typically need attention every 8 to 12 years. The pavers themselves outlast the system holding them together.
Often yes. A lifted edge can sometimes be re-staked and re-secured without pulling the field, and joint sand can be topped up and re-polymeric’d. Sinking sections are a different story – those almost always mean base work, and patching over a bad base is money wasted. We’ll tell you honestly which one you’re facing.
An edge repair or joint re-fill is typically a half-day to a full day. A partial reset runs one to two days. A full paver driveway replacement in Arlington usually takes three to five days depending on square footage and weather.
We match your existing profile code or measurements and order through Master Halco’s dealer network. Where a quality aftermarket equivalent makes sense – joint sand and base material, mainly – we’ll quote both so you can compare. We don’t claim to stock parts or carry them on a truck; we source to your specific system.
We also work with KraftMaid, Cambria, and Silestone on the interior side, so if the driveway project has you thinking about the rest of the house, ask about it during the visit.
Ready to get a written price on your Master Halco driveway or paver repair in Arlington? Call (888) 590-9867 for a free estimate. A live person answers 24 hours a day. We serve Arlington and the surrounding communities, and our technicians have up to 28 years of experience on jobs like yours. Ask about the $40 Off Any Repair Over $200 offer and the permanent 10% Senior & Veteran discount while you’re on the phone.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.