A Barrett company - serving Arlington, TX

Ameristar Roofing in Arlington, TX

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Ameristar Roofing: The Arlington Owner’s Guide

We install and repair Ameristar-compatible roofing here in Arlington, and most shingle and underlayment work lands between $400 and $1,800 for a repair or $8,000 to $20,000 for a full replacement depending on what’s failed and how far the damage reaches. A failed roof rarely announces itself. Arlington owners usually spot it first as granules piling up in the gutter after a hard rain, a brown ceiling ring in a spare bedroom they never use, or that one lifted tab the neighbor mentions when he walks past the driveway. Add a 110-degree July and spring hail off the Trinity, and the picture gets clearer fast. We’ll get to what’s actually failing and what it costs to fix it.

Call (888) 590-9867

Key Takeaways:

  • Ameristar-compatible repairs in Arlington run $400 – $1,800; full replacement runs $8,000 – $20,000.
  • Most failures trace to heat, hail, or flashing, not to the brand of shingle.
  • We pull permits and sign inspections on eligible roofing jobs.
  • Every scope and price change arrives in writing before we touch the roof.

Which Ameristar Models This Applies To

Ameristar makes asphalt shingles across three common product families, and the compatibility question usually comes down to which profile and exposure you’ve got up there. The three-tab lines, the architectural (dimensional) lines, and the laminated lines use different nailing patterns and exposure widths, so a patch with the wrong profile shows up as a visible ridge on the next sunny day. The faster way to identify what you have is to look at the shingle wrapper or the label stapled inside the attic near the gable vent – most Ameristar bundles carry the product name and exposure on that label.

If the label is gone, we measure the exposure from the top edge of one shingle course to the top edge of the next. Three-tab Ameristar shingles put a standard 5-inch exposure; dimensional lines vary. From there it’s the OEM-versus-aftermarket decision. Ameristar OEM shingles match your existing color and profile exactly, which matters on partial replacements in plain view of the street. Aftermarket equivalents from a comparable manufacturer can blend fine on a back slope, and cost 15 to 25 percent less. We’ll lay out both so you can decide on paper before we order anything.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Ameristar Roofing Is Failing

  • Granules in the gutters. Ameristar shingles shed their mineral surface as they age, and a steady stream after each rain means the asphalt is breaking down. In Arlington heat, that process speeds up because the surface bakes at higher temps than in northern climes.
  • Curled or lifted tabs. Edge curls happen when the adhesive strip under each tab lets go – usually from hail impact or thermal cycling between a 100-degree afternoon and a 70-degree night. A few are cosmetic. A pattern across one slope is failing.
  • Dark streaks or “shingle measles.” Those brownish-black blotches are usually blue-green algae (Gloeocapsa magma) feeding on the limestone filler in asphalt shingles. Ameristar’s standard lines are not all algae-resistant, so a home with a heavy north-facing showing here is common in Arlington where the humidity stays high.
  • Soft or spongy decking underfoot. That softness is almost always water that got past the shingle and soaked the plywood – a sign the underlayment failed before the shingle did. This one is not cosmetic; keep weight off that section.
  • Ceiling stains or attic moisture. A brown ring in the drywall below or damp sheathing in the attic is water tracking along a rafter after a leak. By the time it shows indoors, the roof has usually been leaking for months.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s where the money goes for Ameristar-compatible work in Arlington:

Job Installed Price Range What’s Included
Roof Repair $400 – $1,800 Remove and replace damaged shingles, re-seal flashing, underlayment patch as needed
Roof Replacement $8,000 – $20,000 Tear-off, new underlayment, Ameristar-compatible shingles, ridge and starter, cleanup
Tile Roof Repair $600 – $2,500 Replace broken tile, re-bed and re-point, flashing repair
Metal Roof Installation $15,000 – $40,000 Metal panels over decking, fasteners, trim, penetration flashing

What drives the range upward: square footage, roof pitch (a steep roof needs staging and more labor), how many layers need tearing off, and whether the decking needs replacement under wet areas. What drives it downward: a small repair isolated to one slope with no decking damage. Every scope line and any price change gets written out as a change order before we proceed. We pull permits and sign inspections on every eligible roofing job in Arlington, and the work is backed by our 90-Day Done Right Promise.

DIY or Call Us?

A few things you can safely check yourself: look at the shingle label in the attic, sweep granules off the gutter to see if they’re new or old deposits, check for indoor ceiling stains after a hard rain, and photograph any lifted tab from the ground with your phone’s zoom. That’s most of the diagnosis.

What we’d steer you away from is climbing up to patch or seal a leak on a steep pitch. A misstep on a two-story Arlington roof is the part of this job that ends in the ER – falls off ladders and roofs are among the most common home-injury calls every year, and a wet shingle slope in the heat is slicker than it looks. Ladder work on gutters and flashing is the same story. If you can see the problem but can’t safely reach it, that’s our call to make. Plumbing the interior leak and setting a bucket? Fine. Getting on a steep roof at 65 to patch one tab? Not worth it.

Call the crew. We’ll get eyes on it and write you an honest scope. (888) 590-9867.

FAQs

How long does Ameristar roofing last in Arlington? Ameristar’s architectural asphalt lines are typically rated for 25 to 30 years, though Arlington heat and hail usually mean real-world life is closer to 18 to 25 years. The limestone filler and asphalt break down faster in sustained 100-degree summers than in milder climates. Call (888) 590-9867 for an exact quote – estimates are free.

Can a failing Ameristar roof be repaired instead of replaced? Often yes, especially if the damage is limited to one slope or is isolated to flashing around a chimney or vent. Granule loss across the whole roof or repeated leaks in multiple spots usually means replacement. We’ll tell you straight which one makes sense, and put it in writing. Call (888) 590-9867 – the second opinion is free.

How long does a repair or replacement take? Most repairs finish in a half to full day. A full Ameristar-compatible replacement is typically one to two days for a standard single-family home, longer on complex roofs or after decking replacement. We schedule around weather, not around a sales target. Call (888) 590-9867 for a written timeline.

How do you source the Ameristar-compatible part? We order from Ameristar distribution channels by the exact model and color we measured on your roof, and we confirm the profile and exposure before the truck leaves. If the OEM color is discontinued, we’ll show you the closest aftermarket match and price it on paper before you commit. Call (888) 590-9867 – we’ll walk you through the order.

We also handle KraftMaid, Cambria, and Silestone work if your project stretches past the roofline.

If you’re in Arlington and the roof is telling you something, call us at (888) 590-9867 for a free estimate. We’ll pull the permit, put every scope and price change in writing before a nail moves, and back the work with our 90-Day Done Right Promise. We’re an independent service provider – not affiliated with Ameristar – so our opinion on your part is ours, and we’ll tell you when a repair makes more sense than a replacement. Looking up the license number is free and encouraged. Thirty years in, the crew is still the same neighborly bunch, and a live person answers the phone at any hour.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch