A Barrett company - serving Arlington, TX

Ameristar Home Additions & ADU in Arlington, TX

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Ameristar Home Additions & ADU: The Arlington Owner’s Guide

Ameristar-compatible home additions and ADUs in Arlington typically run $45,000 to $130,000 installed for a home addition, with detached ADU construction landing higher, between $90,000 and $220,000. We’re an independent construction company, not affiliated with Ameristar, and we build to the same structural specs your Ameristar plans call for. Most Arlington owners don’t start by shopping for a “part” at all. They start when the structure doesn’t match the plan, when a subcontractor disappears mid-build, or when a previous addition is showing cracked drywall at the seams and every contractor says something different about why. This page is for the owner who’s already got Ameristar drawings in hand, or who’s watching an existing Ameristar addition go sideways and wants straight answers before writing another check.

Call (888) 590-9867

Which Ameristar Models This Applies To

Ameristar sells home addition and ADU plans by series and size band, and the spec sheet that ships with your plan package is the only document that matters for compatibility. Pull it out before anything else. Look at three things: the foundation type the plan assumes (slab, pier-and-beam, or crawl space), the wall panel spec (2×4 vs. 2×6 framing, and the wind and snow load rating for your zone), and the roof pitch and tie-in detail for a home addition versus the standalone framing on an ADU. Ameristar’s plan packages are reviewed to Texas residential code, but the plans assume a fairly generic site. Your lot in Arlington may need a foundation design change, a drainage fix, or a tie-in that shifts the framing.

When we build to an Ameristar plan, we work from the original spec sheet and treat the plan as the starting point, not the gospel. OEM-grade materials matched to Ameristar’s specified framing, siding, and roofing lines are what we source, and where a substitution makes sense we put the reason and the price in writing before anything ships. If you want the equivalent parts in the kitchen package, we carry KraftMaid and Cambria alongside Ameristar-compatible millwork, and Silestone is available where a quartz countertop spec allows. That substitution conversation happens on paper, in advance. Our crew members have up to 28 years of experience reading plan packages and spotting the gap between what a plan assumes and what an Arlington lot actually gives you.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Ameristar Home Additions & ADU Is Failing

Ameristar additions fail in predictable ways, and the first sign is usually cosmetic before it’s structural. Here’s what owners in Arlington report, and what each symptom actually points to.

  • Cracked drywall along the seam where the addition meets the original house. That crack usually means the two foundations are settling at different rates, not that the drywall guy did a bad job. An addition tied to a slab that wasn’t pinned or doweled to the original will move independently, and the seam is where it shows.
  • Water pooling near the addition’s exterior wall after a heavy rain. In Arlington, our clay-heavy soil shifts dramatically between wet and dry seasons. If the addition was built without a proper drainage plane, that pooling water finds the wall and the sill plate underneath it.
  • Sticking doors or windows in the addition, especially in summer. Framing that was built to a generic plan without accounting for our summer humidity will swell and bind. It’s a moisture-management problem, not a hardware problem, and swapping hinges won’t fix it.
  • Roof metal or shingles lifting at the tie-in line. The intersection between the addition roof and the original roof is the most failure-prone detail in the whole build. Improper flashing there lets water run under the shingles, and you won’t see it until the ceiling below stains.
  • The ADU sitting hot in July and cold in January despite the HVAC running nonstop. Insulation spec’d for a plan package’s default climate won’t necessarily hold up to a Texas summer. Under-insulated walls and attics make the unit expensive to run and uncomfortable to live in.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Pricing for Ameristar-compatible work in Arlington depends mostly on the foundation design, the tie-in details, and the finish level you pick. Here’s how the ranges shake out.

Home Addition $45,000 – $130,000
Detached or Attached ADU Construction $90,000 – $220,000
Garage Conversion to Living Space $30,000 – $80,000

What drives the range: foundation type and engineering, whether you’re tying into existing framing or building standalone, roofing and siding material, window and door selection, and finish level inside. What’s included in every quote from us: permits pulled and inspections signed on every eligible job, a line-item scope with allowances written down, and a written change order before any price change happens. If we find a site condition the Ameristar plan didn’t account for, you hear about it in writing before we touch it. Every completed job is covered by our 90-Day Done Right Promise.

DIY or Call Us?

An owner can safely do a few things here: check the addition’s exterior grading and drainage, look at the tie-in flashing from the ground with binoculars, and note where drywall cracks are appearing. That’s inspection, not repair. Anything structural is where DIY goes wrong, and going wrong on a foundation or a roof tie-in means thousands in water damage six months later. Additions and ADUs involve load-bearing framing, tie-ins, and electrical and plumbing work that needs a permit and an inspector. The permit process exists to protect you, and an inspector who signs off on the framing is worth having on your side. Call Barrett & Sons at (888) 590-9867 and we’ll walk the addition with you, tell you what’s cosmetic and what’s structural, and put the fix in writing. No trip charge inside the county.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch