A Barrett company - serving Arlington, TX

Jerith Fence Installation in Arlington, TX

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Jerith Fence Installation: The Arlington Owner’s Guide

Jerith-compatible fence installation in Arlington typically runs $3,500 – $9,000 installed, depending on how much fence you’re setting and which Jerith series you’re matching. This page is about putting Jerith ornamental aluminum and vinyl fence in the ground right – panels, posts, rails, pickets, gates, and the hardware that ties it together. We install Jerith-compatible fence for homeowners across Arlington, and we do it under a written scope with permits pulled where they’re required.

Call (888) 590-9867

Most owners don’t go looking for a fence page on purpose. They find it after something tells them the current fence isn’t holding – a lean they can’t square, a gate that won’t latch, pickets walking out of their channels, a post that rocks in dry soil. That’s the moment this guide is written for. We’ll show you what fails, why it fails in North Texas, what replacement costs, and how to tell a real Jerith match from something that just looks close. Barrett & Sons Construction Arlington is an independent service provider – we’re not Jerith, and we don’t pretend to be. We install the fence and stand behind the work.

Key Takeaways

  • Installed Jerith-compatible fence in Arlington runs $3,500 – $9,000, driven mostly by linear feet, series, and gate count.
  • Jerith aluminum series differ in picket spacing and rail channel dimensions – a mismatched rail will not seat cleanly in an older panel.
  • Texas heat, expansive clay soil, and summer wind are the three things that age an Arlington fence fastest.
  • We source the parts, pull permits where the job needs them, and put every price change in writing before work moves.

Which Jerith Models This Applies To

Jerith builds ornamental aluminum fencing in several residential series, and the parts are not interchangeable across all of them. The rail channel width, the picket spacing, and the post cap profile change from line to line. That matters when you’re replacing a section of an existing Jerith fence or adding onto it – the new rail has to seat into the old post channel at the same depth, or you get a sloppy joint that shows from the street.

Here’s how to identify what you’ve got before you order anything:

  • Look at the inside of a post channel. The rail seats into a routed channel. Measure the channel width with a tape. Older series sit narrower than current ones in some lines.
  • Count pickets per panel and measure spacing. A panel built to one spacing won’t match a fence built to another, and the gate hardware won’t line up either.
  • Check the post cap. Cap profile is a quick tell – flat, pyramid, and ball caps map to different series.
  • Measure the post itself. Standard residential posts run different wall thicknesses, and post size affects gate swing and rail load.

On OEM versus aftermarket for Jerith: OEM parts guarantee the fit. Quality aftermarket aluminum rails and pickets that match the right spec are perfectly serviceable for repairs and often cost less. Where we draw the line is guesswork – a rail that’s “close enough” is how you end up with a gate that drifts out of square six months later. We’ll tell you plainly which parts need the OEM match and which aftermarket equivalents will do the job.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Jerith Fence Installation Is Failing

An Arlington fence lives through 100-degree summers, dry spells that shrink the clay, and the occasional spring wind event that makes you look out the window twice. Here’s what tells you it’s time.

  • Posts leaning or rocking. The usual cause is soil movement around a shallow-set or inadequately concrete-set post. North Texas expansive clay pulls away from concrete in drought, then swells after rain, and a post that wasn’t set deep enough starts to wander.
  • Pickets pulling out of the rail channel. Heat cycles expand and contract aluminum, and a picket that was friction-fit rather than properly fastened will walk out of its channel over a few summers. Once one picket is loose, the panel loses rigidity and the rest follow.
  • Gate sagging or dragging. Hinges wear, but more often the post on the hinge side has shifted or the gate was hung on a post that couldn’t carry the load. A gate that scrapes the ground is a gate that’s telling you the post failed before the hinge did.
  • Rust streaks at welds or fasteners. Aluminum itself won’t rust, but steel fasteners and cheap hardware will. Streaks at the fasteners mean the hardware is failing and the joint is loosening.
  • Panels out of level or rail span sagging. A long rail span without a mid-support sags under its own weight over the years, and a fence installed without a proper post footing shows it first at the middle of the run.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Jerith-compatible fence installation in Arlington lands between $3,500 and $9,000 for a typical residential run. That range covers the materials, the posts and footings, the gate assembly, hardware, labor, haul-away of old fence, and cleanup. Where the price sits inside that range comes down to four things: how many linear feet you’re setting, which series you’re matching, how many gates you need, and how much old fence has to come out and get disposed of first.

We price parts and labor as separate lines on the estimate, so you can see what the material costs and what the install costs. You’ll know before anyone digs a hole what a written scope change means for the price, and every change order arrives in writing before the work moves. Materials we’re installing are named on the estimate – KraftMaid, Cambria, and Silestone show up in our other trades, and the fence side names the series and hardware too, not a mystery brand off a van. The install is backed by our written 90-Day Done Right Promise.

DIY or Call Us?

You can safely handle some checking yourself. Walking the fence to find loose posts, taking measurements off an old panel, noting where the gate drags – those are all things to do before you call anyone. Measuring the inside of a post channel and counting pickets takes ten minutes and saves a lot of back-and-forth on the phone.

Where it goes wrong: setting posts and pouring footings. Getting a post plumb, set to the right depth, in soil that’s been expanded by rain and will shrink in August, is where most DIY fence jobs fail within two years. The footing has to account for the clay, the gate posts have to be set to carry the swing, and the panels have to go level across the whole run. That’s the part people call us about a year after they tried it themselves – and a post that’s already moved is harder to fix than a hole never dug.

For the measurement and the parts match, we’ll help you figure out what you’ve got. Call (888) 590-9867 for a free estimate and we’ll sort the Jerith match on site.

Frequently Asked Questions

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch