Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Bathroom Remodeling: The Arlington Owner’s Guide
Jerith bathroom remodeling scopes that replace failed components in Arlington typically run $9,000 – $28,000 installed, depending on how much of the wet area gets rebuilt. Smaller jobs that swap out a single failing fixture fall in the $5,000 – $12,000 range. We’re an independent contractor, not affiliated with Jerith, so our crews handle the install and finish work that brings a failing bath back to solid.
Most Arlington owners don’t wake up thinking about the fixture in their guest bath. They notice it on a Saturday: a hairline crack that’s been spreading near the drain flange, a wobble in the shower base that wasn’t there last spring, or a caulk line that keeps opening up no matter how many times it gets re-sealed. By the time a shower pan is flexing underfoot, the subfloor underneath has usually been wet for months – and that’s the part that turns a small fix into a bigger conversation.
Which Jerith Models This Applies To
Jerith makes prefab bath fixtures, shower pans, and tub-to-shower bases, and the model-year matters when you’re matching parts. Older Jerith pans use a different drain-stub configuration and mounting-flange depth than current production, so a base from a 2019 model won’t line up with the tailpiece from a 2006 unit without an adapter, even if the footprint measures the same.
The fastest way to identify your model is the compliance label. Every Jerith prefab unit has an ANSI Z124.2 sticker on the back of the surround or on the underside of the pan, listing the model number, manufacture month, and the code-compliant standard it was tested to. Photograph that label before you call anyone – it saves a truck roll and a lot of guessing.
The OEM-versus-aftermarket decision comes down to the drain assembly and the seal kit. Genuine Jerith seals are specific to the flange depth on their pan lines; a universal aftermarket gasket will often fit but won’t seat to the same tolerance, and in Arlington’s clay-heavy soil, a slightly proud seal fails faster than you’d expect. On the surround walls themselves, aftermarket panels can work fine if the thickness matches, but anything over 3/16″ off the original spec will show at the seams.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Bathroom Remodeling Is Failing
- Flexing underfoot in the shower pan. When the base moves as you step, the mortar bed beneath it has cracked loose – usually from a wet leak that’s been running for a season or more before anyone noticed.
- Recurring caulk failure at the seams. Caulk that opens every 4 – 6 months means the panels are moving, not that your caulk is bad. Movement almost always traces back to a loose fastener or a shrinking subfloor.
- A ring-shaped crack around the drain. That crack means the drain collar was over-torqued at install. Arlington’s expansive soils push and pull foundations seasonally, and a rigid collar takes the hit.
- Water stains or soft spots on the ceiling below. You’ll typically spot these in the room under the bath – a brown bloom, a bubble, or a soft spot in drywall. The leak has usually been slow and steady for months by then.
- The surround panel pulling away from the wall. A gap at the top or side edge means the adhesive or mechanical fasteners have given way. Left alone, water gets behind the panel and reaches the framing.
Replacement Cost & What’s Included
In Arlington, a Jerith-style bathroom remodel with failed parts replaced runs $9,000 – $28,000 installed for a full scope. Smaller jobs – swapping just the shower pan and drain assembly, or replacing a single surround, land at $5,000 – $12,000. A walk-in shower installation scope runs $4,500 – $12,000, and a tub-to-shower conversion runs $3,500 – $10,000. A vanity-only swap runs $800 – $3,000.
What drives the range up: whether the subfloor is sound (rotted OSB adds framing and sheathing work), whether the drain stub is salvageable or has to be re-run, and whether the tile or surround spec includes a waterproofing membrane. What keeps the range clean: every price change arrives as a written change order before any scope moves – no surprise invoices at the end. The work itself carries a 90-Day Done Right Promise signed on the contract.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Things an Arlington homeowner can safely handle: re-caulking a dry seam, photographing the model label, and pulling the manufacturer’s spec sheet for the unit. That’s where it stops.
What goes wrong on DIY for a Jerith pan or surround: pulling a setting bed without knowing it’s adhered to the subfloor tears up the OSB, and what looked like a $150 part swap turns into a $3,000 subfloor rebuild. Seating a new drain collar to torque without a leak test ends up dripping silently into the ceiling below. And if a soft spot already exists, walking on a compromised subfloor can crack it through. (888) 590-9867 gets you a live person who’ll talk through the symptom and quote the actual scope, free.
FAQs
A properly installed Jerith pan typically lasts 15 – 25 years in Arlington’s climate; the pan itself is the durable piece – the weak links are the seal kit and the subfloor beneath, which commonly fail closer to 8 – 12 years if the drain was ever slightly off-spec or a slow leak went uncaught. When the pan starts flexing, it’s usually the seal or subfloor giving out before the fixture. Call (888) 590-9867 for an exact quote – estimates are free.
Sometimes. A minor crack at the flange can be repaired with an epoxy patch if the subfloor beneath is dry and sound; a pan that’s flexing or showing a drain-collar crack usually needs replacement. We’ll tell you honestly which side you’re on after we look. Call (888) 590-9867 for a free second opinion on any written estimate you’ve already got.
A single-part swap runs one to two days from demo through leak test and final caulk cure. A full surround and pan replacement with subfloor repair runs three to five days. We’ll write the timeline into the scope so you know what to expect. Call (888) 590-9867 to schedule your free estimate.
We start from the compliance label photo, cross it against the current Jerith spec sheet for your model year, and order the correct flange-depth seal or panel spec. If your label’s gone, we measure the stub, flange depth, and fastener spacing instead. We don’t stock parts – every piece is matched to your unit. Call (888) 590-9867 to schedule your free estimate.
Key Takeaways
- Jerith bathroom remodeling in Arlington runs $9,000 – $28,000 for a full scope, $5,000 – $12,000 for a single-fixture swap.
- Flexing pans and recurring caulk failures point to subfloor or drain issues, not bad caulk.
- The ANSI Z124.2 label on the unit is the fastest way to match a replacement part.
- Every price change on our jobs is a written change order before the work happens.
- We install KraftMaid, Cambria, and Silestone alongside our bath scopes when the job calls for it.
If your Arlington bath is showing any of the symptoms above, don’t sit on it. The earlier a pan or surround gets addressed, the smaller the subfloor bill. We pull every eligible permit, back the work with the 90-Day Done Right Promise, and answer the phone 24/7 – a live person, not a voicemail box. Call Barrett & Sons Construction Arlington at (888) 590-9867 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.