Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Windows & Doors: The Arlington Owner’s Guide
We install ActiveYards-compatible windows and doors across Arlington, and most of that work lands between $4,500 and $15,000 for a standard window replacement, or $8,000 to $25,000 when you step up to impact-rated units. A single failed sash, glass unit, or door slab is a smaller job, and we can usually get out to look at it within a few days. Most Arlington owners find out something’s wrong the same way: a window that won’t latch going into summer, fog between the panes after a cold snap, or a patio door that suddenly drags on the track. We’re an independent contractor and not affiliated with ActiveYards, so when we quote you a part we’ll tell you straight whether it’s the OEM piece or a quality equivalent.
Which ActiveYards Models This Applies To
ActiveYards builds vinyl windows and doors under several product families, and the part that fits one line usually won’t fit another. Before we order anything, we identify what you actually have on the wall. Here’s how that works.
- The glass label. Every sealed unit carries an etch or sticker with the manufacturer, the date it was made, and often a model or unit code. That label is the fastest path to the right replacement glass. If it’s been painted over, we measure instead.
- The frame profile. ActiveYards uses different extrusion profiles across its window lines, and sash balances, tilt latches, and weatherstripping are profile-specific. A balance that fits a builder-grade double-hung from one line won’t seat in another.
- Rough opening measurements. For a full unit replacement we measure the rough opening, not the visible glass. Arlington homes built in the 1970s and 1980s often have openings that don’t match current standard sizing, and that gap is where cheap bids go sideways.
On the OEM question: for glass and structural parts we lean OEM because the fit is guaranteed. For hardware like locks, screens, and rollers, a quality aftermarket piece is often just as good and costs less. We’ll show you both numbers before you decide. We also service KraftMaid, Cambria, and Silestone products if your project runs into other trades.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Windows & Doors Is Failing
Windows and doors rarely fail all at once. They give you warnings for a year or two first. Here’s what to watch for in Arlington.
- Fog or condensation between the panes. That’s a failed seal in the insulated glass unit, not a humidity problem in your house. Once the seal breaks, the desiccant saturates and the glass fogs permanently. It can’t be cleaned out from either side.
- A window that won’t stay up. Worn or broken sash balances. In our heat, the spiral balances and constant-force coils inside vinyl double-hungs lose tension faster than they do up north, and a window that won’t hold position is a balance on its way out.
- Daylight or a draft around the frame. Failed weatherstripping or a frame that’s shifted. Vinyl expands and contracts hard through a Texas summer, and a frame installed without proper shimming will open gaps at the corners over time.
- A patio door that drags or sticks. Usually worn rollers or a track that’s out of level, sometimes a warped slab. Rolling door hardware takes a beating and rollers are a wear item, not a permanent part.
- Water staining on the interior sill. Failing perimeter sealant or a blocked weep hole. This one matters because it’s the step before rot, and once water gets behind the frame the repair gets bigger and more expensive.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what window and door work runs in Arlington. These are installed prices, parts plus labor, not parts alone.
| Job | Installed Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
What moves the number: the number of openings, whether it’s a full unit replacement or a glass-only swap, impact vs standard glass, and whether the existing opening needs reframing. We quote line-item, so you see the part, the labor, and the disposal separately. Every price change comes to you as a written change order before we touch the job, and every job we complete carries our written 90-Day Done Right Promise. Our technicians have up to 28 years of experience, and every eligible job gets permits pulled and inspections signed.
DIY or Call Us?
Some of this an owner can safely check. Cleaning a patio door track, tightening a loose strike plate, and replacing a screen are all reasonable weekend jobs. Basic weatherstripping on a door frame, fine.
Where DIY goes wrong: glass swaps and full unit replacements. A sealed glass unit is heavier than it looks, and a dropped sash on a second-story Arlington window is a real hazard. Balancing a double-hung replacement wrong means the window falls, and a frame installed out of square leaks. Glass and structural work is where we’d rather you call. That’s not a scare tactic, it’s just where the risk doesn’t match the savings. If you’re not sure which side of the line your job falls on, call (888) 590-9867 and we’ll tell you honestly whether it’s worth doing yourself.
FAQs
Plan on 20 to 25 years for a quality vinyl window in this climate, and expect the sealed glass unit and the weatherstripping to be the first things to go, often around year 15 to 20. The Texas sun and temperature swings work on vinyl harder than a milder climate does. Call (888) 590-9867 for an exact quote on yours, estimates are free.
Often yes. A fogged glass unit can be swapped without replacing the whole window, and a failed balance or lock is a small parts job. If the frame itself is cracked or rotted, replacement is the honest answer. We’ll tell you which one you’re looking at. Call (888) 590-9867 to schedule your free estimate.
A single glass unit or hardware repair is usually a couple of hours, and a full window replacement runs a few hours to a day per opening depending on the frame. We schedule ahead and don’t promise same-day on installs. Call (888) 590-9867 and we’ll give you a realistic timeline for your Arlington home.
We match the part to your model by reading the glass label and measuring the frame and rough opening, then order OEM where fit matters and quality aftermarket where it doesn’t. You see both prices in writing before we order. Call (888) 590-9867 for a free estimate.
Key Takeaways
- Installed window replacement in Arlington runs $4,500 – $15,000; impact windows $8,000 – $25,000.
- Fog between panes means a failed glass seal, and it can’t be cleaned out.
- We’re an independent contractor, not affiliated with ActiveYards.
- Line-item quotes, written change orders, and the written 90-Day Done Right Promise on every job.
Whether it’s a fogged pane you’ve been ignoring or a patio door that’s stopped latching, we’d rather look at it now than after the water damage sets in. We pull permits, we put our prices in writing, and we stand behind the work with our 90-Day Done Right Promise. Call Barrett & Sons Construction Arlington at (888) 590-9867 for a free estimate.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.