Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Home Additions & ADU: The Arlington Owner’s Guide
ActiveYards-compatible home additions in Arlington typically run $45,000 – $130,000 installed, and an ADU runs $90,000 – $220,000. We’re an independent builder, not affiliated with ActiveYards, and we don’t promise same-day anything on work this size. What we do promise: a written scope, a fixed price, and permits pulled before the first nail.
Most owners don’t wake up one morning and decide the addition failed. They notice it slowly. A pitch on the sunroom roof that used to shed water now pools it. A door that stuck in July sticks all year. The ActiveYards piece that ties their structure to the house has usually been working fine for a decade, then one Texas summer it doesn’t. That’s when the phone calls start, and it’s usually after the first little stain on the ceiling of the room next door.
Which ActiveYards Models This Applies To
ActiveYards builds sunrooms, screen rooms, patio covers and modular additions through a few distinct product lines, and the framing, roofing and connector specs change between them. The part that fits a screen room wall won’t fit a cathedral-ceiling sunroom, even though the panels look the same from the yard. Before we order anything, we read the data plate riveted to the frame or stamped on the beam near the door. That plate tells us the series, the panel span, and the wind rating the structure was engineered for.
If the plate is gone, which happens more than you’d think after a repaint or a reroof, we measure. Panel width, beam depth, post spacing, the pitch of the roof panel and the exact hardware pattern at every wall connection. From there it’s an OEM-versus-aftermarket call. ActiveYards’ original extrusion is the safe match because the panel profile and the gasket seat are proprietary. Quality aftermarket equivalents exist for the fasteners, seals and flashing, and they’re fine where they meet the same spec. Where they don’t meet it, we don’t use them. We install KraftMaid, Cambria and Silestone on the interior build-outs that attach to these structures, and we hold every material to the same standard: a brand you can look up, not something off a van.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Home Additions & ADU Is Failing
- Water pooling on the roof panel after rain. The panel has lost its designed pitch, usually because a post has settled or a beam has sagged under Arlington’s clay soils. Slow pooling stresses every seam and eventually finds a way inside.
- Condensation on the inside of the glass or panels in the morning. The thermal seal has failed, or the weep channels are clogged with pollen and grit. Left alone, that moisture works back into the frame and softens the sealant joints.
- A door or window that no longer latches square. The structure has racked. Texas heat expansion over 100-degree summers and a 20-degree winter morning is a real load cycle, and the frame has loosened at one or more anchor points.
- Rust streaks or discoloration along the base and connectors. Galvanized hardware has started to give, often first at the wall plate where splash-back from the roof drains. A connector that’s rusted through is a structural concern, not cosmetic.
- Gaps or cracking where the addition meets the house. The flashing detail between the structure and the home’s wall has pulled or dried out. That joint is the single most common leak source on any addition, in Arlington or anywhere.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed repair and replacement on an ActiveYards structure in Arlington falls within the $45,000 – $130,000 lead range for a full home addition, and an ADU runs $90,000 – $220,000. Smaller scopes cost less, and we price them that way. What moves the number: whether we’re replacing one panel and its gasket or rebuilding the wall connection, how much of the existing framing is sound, and whether a permit and engineering review are required. In Arlington, additions with living space almost always trigger a permit, and we pull it.
Every estimate is line-item. Panel, fasteners, flashing, labor, permit fee, and any allowance are all written down. If the job grows once we open it up, you get a written change order before we touch a thing. An allowance that isn’t on paper is a surprise waiting for a date. Every completed job is backed by the 90-Day Done Right Promise.
DIY or Call Us?
Here’s the honest split. You can safely check the data plate, clear debris from the weep channels, look for daylight through seams, and photograph the wall connection for a record. That’s about it. Where DIY goes wrong on these structures: re-seating a panel or re-anchoring a post at height, working with a leaking wall joint, or chasing a sag in the frame with shims and hope. A posts-and-beams structure carries real load, and a failure at height is a serious hazard. The one honest caveat: if a wall connection is compromised or a structural member is rusted through, stop and call someone trained. Our technicians have up to 28 years of experience on these builds. Call (888) 590-9867 for a free estimate.
FAQs
A properly built and maintained ActiveYards structure holds up for many years in this climate, but the hardware and seals are the wear parts. Arlington’s sun and clay are hard on both, so the honest answer is that the frame outlasts the seals and fasteners, and those need checking every few years. Call (888) 590-9867 for an exact quote on your structure; estimates are free.
Often yes. A single panel, a gasket, flashing or a connector can be swapped without tearing down the whole structure. Whether repair makes sense depends on how much of the frame is sound once we inspect it. We’ll tell you plainly which way is cheaper and why. Call (888) 590-9867 to schedule your free estimate.
A single part or flashing repair is usually a day or two; a panel rebuild can run a few days to a week, depending on weather and permit timing. We’ll give you a written schedule, not a guess at the door. Call (888) 590-9867 for a realistic timeline on your job.
We read your data plate or measure the structure, then order the OEM part from ActiveYards’ supply channel or a spec-matched equivalent where the original is discontinued. We don’t claim to stock parts or carry them on a truck. Every price change is a written change order before work proceeds. Call (888) 590-9867 for a free estimate.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.