Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Arlington Homeowners Choose Abodu Construction
We provide independent Abodu construction and service work in Arlington, TX, coordinating everything from site prep and pier foundations to utility tie-ins and finish packages for Abodu backyard homes. We are not an Abodu dealer and we’re not a warranty representative. What we bring is the part owners actually struggle with: a city permitting path, expansive Blackland Prairie clay, and the inspection sequence that goes with a prefabricated unit. Every Abodu job in Arlington starts with a written scope and a written estimate. Call (888) 590-9867 and a live person picks up.
Why Trust Barrett & Sons Construction Arlington for Your Abodu Construction?
Abodu units are modular. They show up on a crane, get set on a support system, and connect to the house’s utilities. The failures we see in Arlington almost never trace back to the factory. They trace back to what happened underneath and around the module.
Our technicians have up to 28 years of experience working on North Texas homes, and that experience is what tells them the difference between a seam that failed and a pier that settled. When we open up a problem, we specify components that match Abodu’s documented module specs: fasteners rated for the structural framing, sealants compatible with the panel materials, and electrical and plumbing hardware from the manufacturer’s listed components. Nothing off the clearance shelf.
Every eligible job gets permits pulled and inspections signed. Every price change arrives as a written change order before work starts. That matters more than usual with a prefab unit, where a utility tie-in deficiency discovered mid-job can become a dig you didn’t plan for. And every completed job is backed by the written 90-Day Done Right Promise: if it isn’t right, one call brings Tom back. As an independent Abodu construction provider, our credibility is in the coordination, not in any manufacturer authorization.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Abodu Construction Problems We Fix in Arlington
Here’s what we actually get called out for on Abodu homes around Arlington, and why each one happens:
- Site and slab settlement. The 500 sq ft one-bedroom and 610 sq ft one-bedroom with flex layout both sit on a support system that has to stay level. Arlington’s expansive clay swells in wet seasons and shrinks in drought, and an out-of-level pier shows up inside as racked doors, uneven floors and trim gaps, not as a factory defect.
- Utility tie-in shortcuts. Undersized electrical feeds, shallow or poorly bedded sewer and water lines, and missing backflow or disconnect hardware are the top inspection failures we correct. They cause settling at the connection point and can surface years later as a soggy patch in the yard.
- Crane-set and module seam problems. Gaps or failed sealant at panel joints, roof-to-wall transitions and penetrations let water in during heavy Arlington storms. That shows as ceiling staining or damp interior walls, usually on the side facing the prevailing storm direction.
- Finish-out mismatch. Cabinetry, countertops or shower surrounds installed without accounting for the module’s wall framing and movement lead to cracked tile, popped fasteners and cabinet doors that drift out of alignment within a year.
- Drainage grading. Water sheeting toward the unit instead of away from it is quiet and expensive. In Arlington, where a dry summer followed by a wet fall pulls the clay hard, poor grading accelerates settlement under a two-bedroom multi-generational unit faster than anywhere else on the lot.
Abodu Parts & Our Repair-vs-Replace Approach
We don’t stock Abodu parts locally, and anyone who tells you they do is guessing. For each job we identify the correct OEM or OEM-compatible component from the module’s documented specs, then order it to the job. That means fasteners sized for the actual structural framing, sealants listed as compatible at the seam and roof transition, and electrical and plumbing hardware that matches what Abodu specified for the unit.
The repair-vs-replace call is where we try to be honest. A seam, drainage or grading problem caught early usually wants targeted repair and re-sealing, not a rebuild. When the slab or the utility trench underneath is the root cause, patching the cosmetic symptom over and over is a disservice. Partial rebuild of that connection is the more honest answer, and we’ll tell you so before you spend a dollar.
Call (888) 590-9867 to schedule a free estimate and a free second opinion on any written estimate you already have.
Our Abodu Service Process – Step by Step
- 1
Diagnosis. We look at the symptom from the inside out: door alignment, floor level readings, moisture at seams, and grading around the perimeter. Then we check the support points and utility trench. The sticky door and the pier may be the same story.
- 2
Repair or install scope. You get the scope in writing, with allowances in writing, and any price change as a written change order before work begins. Permits are pulled on every eligible job.
- 3
Test. Level readings after re-shimming, a storm-test on the re-flashed seam, and a walkthrough on the utility connections before the inspector arrives. The permit inspector works for you, not for us. That’s why we like him.
- 4
Warranty. The 90-Day Done Right Promise goes on the contract in plain language. If something drifts out of alignment or a seam opens, one call brings Tom back.
See the difference
Before
After
Before
After
Before
AfterAbodu Products We Service & Install in Arlington
We work with the full Abodu backyard-home lineup as an independent builder and service provider in Arlington: the 500 sq ft one-bedroom, the 610 sq ft one-bedroom with flex or office layout, the two-bedroom unit for multi-generational use, and the studio configuration used for rental or a home office. For each one we handle site work, foundation and pier coordination, utility tie-ins, and finish packages. What we don’t do is claim to stock these units or sell them as a dealer. We build around them.
We Also Service These Brands
Barrett & Sons Construction Arlington isn’t a single-brand shop. We install and service KraftMaid and Cambria in kitchens, Silestone counters, Kohler fixtures, GAF and CertainTeed roofing, Andersen and Marvin windows, and Belgard and Techo-Bloc hardscapes. That breadth matters when an Abodu finish package needs cabinetry or a shower surround that actually matches the module framing.
FAQs – Abodu Construction Service in Arlington
Does an Abodu unit in Arlington need a separate ADU permit even though it’s prefabricated? Yes. Arlington requires permitting for the ADU as a structure and for the utility tie-ins regardless of whether the module is factory-built. Prefab changes the construction method, not the permit requirement. We pull the permits and get the inspections signed.
Can Barrett & Sons Construction Arlington act as an Abodu dealer or warranty provider? No. We’re an independent Abodu construction and service provider in Arlington, not a dealer and not a warranty representative. We coordinate site work, foundations, utility tie-ins and finish packages. Any warranty claim on the module itself goes to Abodu directly.
Why do Abodu doors and windows start sticking a year or two after install in North Texas? It’s almost always settlement at the pier or slab interface, not the door or window. Arlington’s clay moves with the seasons, and an out-of-level support point racks the frame. Re-leveling or re-shimming the support points usually fixes it. Call (888) 590-9867 for a free estimate.
What’s involved in tying an Abodu unit into city water, sewer and power in Arlington? An electrical feed sized to the unit’s load, a properly bedded sewer and water line at the right depth, backflow prevention where required, and a disconnect at the connection point. Each one has to pass inspection. Miss one and the whole tie-in gets held up.
Can I finish out an Abodu unit with custom cabinets, quartz counters or a tiled walk-in shower? Yes, and it’s one of the most common upgrades we handle. The key is installing to the module’s wall framing and movement so the tile doesn’t crack and the cabinet doors stay aligned. Walk-in shower installation runs $4,500 – $12,000 in Arlington. Call (888) 590-9867 for exact pricing on your layout.
How much does Abodu construction cost in Arlington? ADU construction runs $90,000 – $220,000, home additions $45,000 – $130,000, a full kitchen remodel $14,000 – $45,000, and roof repair $400 – $1,800. These are market ranges, and your written estimate will be specific to your site. Call (888) 590-9867 for an exact quote. Estimates are free.
| Service | Arlington Price Range |
|---|---|
| ADU Construction | $90,000 – $220,000 |
| Home Addition | $45,000 – $130,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Roof Repair | $400 – $1,800 |
Book Your Abodu Service in Arlington, TX
Most Abodu calls in Arlington start small: a sticking bedroom door, a hairline crack above a doorway, water staining near a module seam after a storm. Catching it early is the difference between a targeted repair and a rebuild. Call (888) 590-9867 for a free estimate. A live person answers, day or night.
Written by the team at Barrett & Sons Construction Arlington.