Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Driveway & Pavers: The Arlington Owner’s Guide
We install and service driveway and paver systems for Arlington homeowners, including American Standard-compatible materials for failing drives that were sold as part of an American Standard exterior package. Most paver driveway work in Arlington lands between $7,000 and $18,000 installed; concrete runs $4,500 – $12,000, asphalt $3,500 – $9,000. Barrett & Sons Construction Arlington is an independent contractor and is not affiliated with American Standard.
Owners usually don’t wake up looking for “American Standard pavers.” They wake up to a hairline crack that spread across a Texas summer, a paver that rocks when the lawn mower rolls over it, or a low corner of the drive where water stands for two days after every storm. That’s when they dig out the original spec sheet and start matching the system. The good news: this is one of the easier exterior components to diagnose once you know what to look for.
Key Takeaways
- Paver driveway installation in Arlington: $7,000 – $18,000. Concrete replacement: $4,500 – $12,000. Asphalt: $3,500 – $9,000. Sealing: $250 – $700.
- Most driveway failures in Arlington trace to base prep and drainage, not the paver or slab itself.
- We can check what’s under your drive and give you a written recommendation before anything is torn out.
- Every price change on a Barrett & Sons job arrives as a written change order before work moves.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Which American Standard Models This Applies To
American Standard isn’t a paver manufacturer so much as a name that shows up on builder exterior packages, bundled material specs, and tract spec sheets across North Texas. What that means for you: the part number on your home’s paperwork may not point to a single paver SKU. It often points to a family of materials (a specific paver profile, base depth spec, and drainage detail) that a builder selected in bulk. Look for the original build packet or HOA material schedule first. If you don’t have it, we can take a few measurements on site.
Three things to check before you call anyone:
- Paver dimensions and corner geometry. Standard American Standard-listed pavers tend toward 4×8-inch and 6×9-inch modular shapes; a mismatched replacement (say a 4×9 or a tumbled 6×6) will never align cleanly with the existing field.
- Base depth from the grade. North Texas builders ran anywhere from 4 to 8 inches of compacted base depending on the lot and year. That number drives what replacement system will actually hold.
- Color and finish batch. Most paver manufacturers run color lots per production cycle. If you don’t have the original lot on file, expect a close match rather than a perfect one.
OEM-vs-aftermarket on this component is usually a non-issue. Once you know the dimensions, finish family, and base spec, an equivalent paver from a listed supplier works just as well. That’s where our brand depth helps: we work with Belgard and Techo-Bloc across the hardscape side of every job, so material you can look up is always on the table. We don’t stock parts on a truck and we don’t claim to. We source, verify, and install. If your exterior spec sheet also lists brands for interior work, we handle KraftMaid, Cambria, and Silestone cabinets and counters as well.
Signs Your American Standard Driveway & Pavers Is Failing
Arlington sits on expansive clay soils, and the soil movement here is the single biggest reason driveways fail early. Real symptoms, in order of how often we see them:
- Hairline cracks that widened over one summer. Clay swells in wet spring then shrinks hard in July, and a slab with thin control joints will split along the joint. Once a crack reaches the edge of a slab, patching will not stop it from spreading.
- Pavers that rock underfoot. Individual units rock because the sand between them has washed out or the base compacted under them. Usually it’s a drainage failure upstream, not the pavers themselves.
- A low corner or a pooling puddle after rain. Standing water in the same spot for 24 to 48 hours is a grading problem. Arlington’s clay holds water; a drive that isn’t pitched away from the slab and the lot won’t drain no matter how good the pavers are.
- Raised, tipped, or popping pavers. Roots from nearby oak or pecan will lift pavers within 5 to 10 years of planting. Culprit roots need to be addressed before re-laying the field.
- Efflorescence (white haze) that keeps coming back. A one-time haze is normal on new pavers. Recurring haze on a 6-year-old drive points to moisture trapped under the field, which again is a base or drainage issue.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what installed driveway work costs in Arlington, with the part and labor broken out:
| Scope | Installed Range | What’s Included |
|---|---|---|
| Paver driveway installation | $7,000 – $18,000 | Base removal, compacted limestone base, pavers, polymeric sand, edge restraint, drainage tie-in |
| Driveway replacement (concrete, full) | $5,000 – $14,000 | Demo, haul-off, base, formed and finished slab, expansion joints |
| Asphalt paving | $3,500 – $9,000 | Base prep, hot-mix lift, compaction, edges |
| Driveway sealing | $250 – $700 | Clean, prep, single-coat seal |
What drives the number up: length and width, how much base has to be torn out, whether the slope has to be re-graded to shed water, and paver selection within Belgard or Techo-Bloc lines. What drives it down: keeping the existing base intact and just re-laying the surface. We put parts and labor on one page, line by line, so you can see what a paver costs versus what the base and labor cost. If we find a surprise mid-job, you get a written change order before any more work moves. Every completed job carries the written 90-Day Done Right Promise.
DIY or Call Us?
There’s a real split here. You can safely check a few things: walk the drive with a hose on, note where water stands and for how long, and lift one paver at the edge to look at what’s under it. What goes wrong with DIY is the part most homeowners can’t see. Re-leveling pavers over a failing base without fixing the base means the same wobble is back by the next wet season. Concrete patches on a clay-soil slab crack again within 6 to 12 months. And re-grading without doing the math on where the water needs to go can push runoff toward the foundation, which turns a driveway problem into a slab problem.
If you want a fast check, call (888) 590-9867 and we’ll walk your drive with you before anything gets torn out. Free estimates, and our crew members are background-checked on every visit.
FAQs
Expect 25 to 40 years on the paver itself if the base is right and drainage is correct. The pavers don’t fail early in Arlington; the base does. Clay soil movement and water that can’t escape shrink that lifespan fastest, so a paver drive is really a base-and-drainage investment with a pretty surface on top.
Usually yes, if the base is still sound. Lifting and re-setting a small field of pavers with fresh sand and edge restraint is a fraction of a full replacement. If two or more slabs have cracked edge to edge, or the pooling has been there for years, replacement is the safer bet. Call (888) 590-9867 for a free estimate and we’ll give you a straight answer either way.
A paver driveway replacement typically runs 3 to 6 working days, weather permitting, with base demolition on day one and finish sand on the last day. Repairing a specific section of drive is usually a single-day job. Concrete needs a 5 to 7-day cure before you drive on it, and we’ll tell you that at the quote, not the end of the job.
We match your original spec against listed paver lines from Belgard and Techo-Bloc, verify dimensions and finish family, and write the selected material into the contract as a named line item. Nothing comes in as a mystery brand. If a close-match color lot is the best option, you’ll know it up front. Every price change arrives as a written change order before it happens, and the permit inspector works for you, not for us, so the drive gets inspected and signed the same as any other eligible job. Call (888) 590-9867 for your free estimate.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.