Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Bathroom Remodeling: The Arlington Owner’s Guide
Ameristar bathroom remodeling in Arlington typically runs $9,000 to $28,000 installed, and most jobs are quoted after a free in-home measure rather than over the phone. Ameristar is a name you’ll see on builder-grade tubs, shower surrounds, and vanity tops in Arlington homes built through the 1990s and 2000s, and the parts fail in predictable ways. The tub develops a hairline crack at the drain. The surround panels pull away from the wall and trap water behind them. A vanity top chips at the front edge and the chip turns into a stain that won’t come out. Most Arlington owners find out when they step into the shower and feel flex underfoot, or when they pull the rug back and see a soft spot in the floor.
Which Ameristar Models This Applies To
Ameristar components show up in a lot of Arlington bathrooms, and the first job is figuring out which line you have. Ameristar tubs and surrounds are typically labeled on a sticker under the tub lip, on the back of the surround panel, or stamped into the underside of the vanity top. Pull the access panel if there is one, and look for the model code there before you order anything. The labels fade, so measure first: inside the tub at the drain end for width, from the overflow to the drain for length, and the surround’s total panel width against the wall studs.
OEM parts are still available for many common Ameristar tub and surround lines, but the OEM route gets expensive once you’re paying freight and waiting for a warehouse. A quality aftermarket tub or surround built to the same footprint and drain location usually costs less and installs in the same stud bay. The catch is compliance: a replacement tub or shower valve in Arlington needs to match the rough-in dimensions and the drain location, or the job grows. Ask us to verify the model code and the rough-in before you buy a part.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Bathroom Remodeling Is Failing
- Flex underfoot in the tub or shower floor. The subfloor or the tub’s support base has given way, and in older Arlington homes that usually means water got behind the surround at the caulk line and rotted the framing. Once the tub flexes, cracks follow.
- Hairline cracks at the drain or overflow. The fiberglass or acrylic shell has flexed one too many times, or a drain was overtightened on the original install. A crack at the drain means the leak is already going into the floor below.
- Surround panels separating from the wall. The adhesive failed or the panel was never screwed to the studs through the flange. Water runs behind the panel and shows up as a stain on the ceiling of the room below.
- Chipped or dull vanity top at the front edge. The edge takes the most wear and the finish has worn through. A chip at the edge is where a stain starts, and it gets worse with every cleaning.
- Stained caulk line at the tub-to-wall joint. The caulk has failed and water is getting in behind the surround. Recaulking hides the symptom, but the damage behind the panel is the real problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what a realistic Ameristar bathroom remodeling scope runs in Arlington, priced by the job rather than by the part:
| Scope | Installed range in Arlington |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Shower replacement | $3,000 – $8,500 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Vanity installation | $800 – $3,000 |
What drives the range: whether the subfloor is rotted, whether the valve has to move, the size of the room, and the finish level of the tile and vanity. Every scope, allowance, and price change goes on paper as a written change order before work happens. Parts and labor are broken out line by line so you can see what the tub costs and what the install costs. Every eligible job includes permits pulled and inspections signed, and the finished work is backed by our 90-Day Done Right Promise.
DIY or Call Us?
Some of this is worth checking yourself. Look for flex, cracks, and stains. Feel the caulk line. Pull the access panel and read the model code. Measure the tub for width and the surround panel for height, and write the numbers down. That takes ten minutes and saves a lot of guessing.
Where DIY goes wrong is the part behind the wall. Replacing a tub or surround means cutting out the old unit, checking the subfloor and framing, setting the drain correctly, and waterproofing the wall before the new panel goes up. A tub set on a bad subfloor cracks again in a year. A surround that isn’t sealed at the flange leaks into the floor cavity. A valve that isn’t set at the right depth means a handle that won’t sit flush. And if there’s any sign the floor is soft, stop and call us before you pull the tub. Call (888) 590-9867 for a free estimate. A live person answers, day or night.
FAQs
Most Ameristar tubs and surrounds last 15 to 25 years in Arlington conditions, with the shorter end being units installed without proper backing or sealant at the flange. The Texas heat and the way Arlington homes run the plumbing through interior walls both play a part. A unit set correctly on a solid base and sealed at the flange tends to last toward the top of that range. If yours is showing flex or a drain crack, it’s past the point of repair.
A small chip in a vanity top can be repaired with a color-matched epoxy kit, and that’s worth trying first. A cracked tub shell or a separated surround panel usually can’t be repaired in a way that lasts, because the failure is behind the panel and the water damage is already there. We’ll give you an honest read during the free estimate rather than sell you a replacement you don’t need.
A shower or tub replacement usually takes two to four days once the parts are on site, and a full bathroom remodel runs one to three weeks depending on the tile and the plumbing changes. Most of the time is waterproofing and tile, not the tub itself. We’ll put the schedule in writing with the estimate, and any change to it comes as a written change order.
We verify your Ameristar model code and rough-in measurements first, then source either the OEM part or a quality aftermarket equivalent, whichever gives you the better fit and lead time. You get the part number and the price in writing before anything is ordered. We don’t stock parts and we don’t carry them on a truck. We also handle KraftMaid, Cambria, and Silestone for the rest of the project. Call (888) 590-9867 for a free estimate. Barrett & Sons Construction Arlington is an independent service provider and is not affiliated with Ameristar.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.