A Barrett company - serving Arlington, TX

Ameristar Driveway & Pavers in Arlington, TX

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Ameristar Driveway & Pavers: The Arlington Owner’s Guide

We install Ameristar-compatible driveway and paver systems in Arlington, and a typical paver driveway runs $7,000 – $18,000 installed, with concrete driveways at $4,500 – $12,000. Scheduling depends on the season and the scope; call us and we’ll give you a real timeline, not a phone-book promise. Most Arlington homeowners find us the same way: a section of driveway has settled or a run of pavers has heaved after a wet spring, and the low spot holds water long after the rain stops. Sometimes a cracked border paver tips you off first. Either way, the failure almost always traces back to what’s underneath, not the paver itself.

Call (888) 590-9867

Which Ameristar Models This Applies To

Ameristar makes aluminum fence and railing, and also sells paver edging and border systems, so the first job is figuring out which product line you actually have before we talk part numbers. Look for the sticker or stamped mark on the back of an edging section or the underside of a border paver. Measure the height and the length of a single piece, because Ameristar’s series differ in profile: a piece that looks identical from ten feet away may be a different height or wall thickness, and the wrong one won’t lock in. That’s the compatibility gotcha most homeowners hit. On a half-inch difference, a driveway border that should sit flush ends up proud of the surface and starts catching tires.

Should you go OEM or aftermarket? For visible borders and edging, we lean OEM or a matched equivalent so the profile lines up with what’s already there. For hidden base and bedding materials, a quality aftermarket product does the job fine. We don’t stock parts and nothing rides on a truck, so if a piece needs replacing, we source it to your measurement and model. We also install KraftMaid, Cambria, and Silestone on interior jobs, but for driveways and pavers, the brand on the ticket is Ameristar.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Ameristar Driveway & Pavers Is Failing

Every symptom below points to a cause, and the cause is what we fix. Patching the surface alone usually buys you one more winter.

  • Water pooling near the border: the edging has shifted or the base wasn’t compacted right, so the driveway no longer drains toward the street. In Arlington’s clay-heavy soil, this gets worse after every heavy rain.
  • Loose or rocking pavers: the bedding sand has washed out or the base layer settled. One rocking paver usually means a whole run is compromised underneath.
  • Heaving or a hump in the middle: moisture got into the base and froze, or tree roots pushed up from below. North Texas freeze-thaw cycles are hard on shallow base work.
  • Faded or chalky color: Texas sun and UV exposure break down the surface pigments. Cosmetic on new pavers, but a sign of age on older ones.
  • Cracked or chipped border pieces: the aluminum or concrete edging took a hit from a mower or a car, and once it fails, the pavers behind it start spreading.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what the work runs in Arlington, parts and labor broken out so the number makes sense:

Job Installed Range
Paver driveway installation $7,000 – $18,000
Concrete driveway installation $4,500 – $12,000
Asphalt driveway paving $3,500 – $9,000
Driveway replacement $5,000 – $14,000
Driveway sealing $250 – $700
Paver patio installation $3,500 – $11,000

What drives the range: square footage, how much base has to be excavated and rebuilt, whether the old surface comes out, and the paver profile you choose. We quote parts and labor as separate line items, so you see what the Ameristar pieces cost and what the install costs. No surprise invoice at the end, because the allowance that isn’t on paper is a surprise waiting for a date. Every eligible job gets permits pulled and inspections signed, and every completed driveway is backed by our written 90-Day Done Right Promise.

DIY or Call Us?

You can safely check a few things yourself. Hose down the driveway and watch where the water goes. Wiggle a suspect paver by hand. Photograph the failure and measure the affected area. That information helps us quote faster and more accurately.

Where it goes wrong: excavating and re-compacting base by hand in Arlington’s clay rarely holds up. We’ve torn out plenty of driveways where a homeowner laid pavers on two inches of sand over hard, dry earth, and the whole surface sank within a season. Getting the base right is the whole game, and it takes real compaction equipment. If you’d rather not gamble a $7,000 – $18,000 job on a rented plate compactor, call (888) 590-9867 and we’ll take a look.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch