A Barrett company - serving Arlington, TX

Ameristar Fence Installation in Arlington, TX

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Ameristar Fence Installation: The Arlington Owner’s Guide

Ameristar fence installation in Arlington typically runs $3,500 to $9,000 for a standard residential run, including panels, posts, rails, gates, and cleanup. Most jobs are quoted in writing within a day or two of the site visit, and we schedule the crew as soon as you approve the scope. The page you’re on is for owners who already have Ameristar in the ground or on the truck and need to know what’s compatible, what fails first, and what replacement really costs in Arlington.

Call (888) 590-9867

Owners usually figure out something’s wrong the same way. A gate that used to swing stops closing without a lift. A post looks solid until you lean on it. Or a windstorm knocks a section sideways and you find a bent rail bracket that no longer holds. By the time you call, the fence has been quietly moving for a season or two.

Key Takeaways

  • Ameristar makes steel and aluminum ornamental fencing, gates, and post hardware under several model lines. The right part depends on the series, not just the color.
  • Installed fence pricing in Arlington runs $3,500 to $9,000 for a typical run, with gates, grade changes, and take-down of the old fence driving the number up or down.
  • We install Ameristar-compatible systems. We don’t claim to be Ameristar, and we don’t carry parts on a truck.
  • Barrett & Sons has been pulling permits, writing change orders, and signing inspections in Arlington for over 29 years.

Which Ameristar Models This Applies To

Ameristar’s ornamental fence lineup includes steel and aluminum panels under model names like Preserve, Protect, and a handful of residential and commercial series, plus gate and post hardware that changes with the gauge. Two fences can look identical from the sidewalk and take completely different posts, brackets, and hinge plates. That’s the first thing to check before anyone promises a price.

To identify yours, look at the post cap and the bottom rail. Post caps on the heavier steel lines sit flat and thick. The lighter aluminum lines use a narrower cap and a thinner rail. Pull a tape measure across the post face and the rail, and write both numbers down. If you still have the paperwork from the original install, the series is on the spec sheet, and the panel tag or a stamp on the back of a rail often carries it too.

On the OEM-versus-aftermarket question, our honest take: for structural parts like posts, hinges, and gate frames, match the Ameristar series. A bracket from a different line will bolt up and then fail early because the gauge and hole spacing don’t line up. For hardware like latches, caps, and finials, a quality aftermarket part is fine if it’s rated for the rail thickness you have. We’ll tell you which side of that line each item falls on before you buy anything.

Barrett & Sons is an independent contractor, not affiliated with Ameristar. We install the brand and source the parts the job needs.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Ameristar Fence Installation Is Failing

Most failures we see in Arlington trace back to the same handful of causes. Here’s what to look for and what’s going on underneath.

  • A gate that drags or won’t latch. Usually a hinge plate that’s loosened from the post or a post that’s shifted in the ground. Steel gates are heavy, and once the post moves, the gate never lines up again on its own.
  • Bent or sway-backed rails after wind. Thin-gauge ornamental panels flex under 40 mph gusts, and the rail-to-post bracket takes the load. If the bracket wasn’t matched to the series, it gives first.
  • A post that’s loose at the base. This is the big one. Arlington’s black clay soil swells and shrinks hard through wet and dry cycles, and a post set in too little concrete or set too shallow starts rocking. Once the base moves, the whole run follows.
  • Rust streaks from a weld or joint. Steel Ameristar systems are powder-coated, and any chip or field cut from the original install becomes a rust point. A rust spot on a two-year-old fence usually means the cut end wasn’t treated.
  • Loose or missing caps, screws, and finials. Small hardware fails slowly and noisily. Missing caps let water into the post, which is the start of the rust problem above.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s how fence money actually breaks down in Arlington, so you can see what’s parts and what’s labor.

Item Typical installed range
Ameristar-compatible aluminum fence, standard residential run $4,000 – $10,000
Vinyl fence, same footprint $3,500 – $9,000
Single gate replacement or re-hang $400 – $1,200
Post replacement (set, level, reattach) $250 – $600 per post
Take-down and haul-off of old fence $300 – $800

The line items that move the price most are gate count, grade changes along the run, and how many posts turn out to be moving. A flat, single-gate lawn sits near the bottom. A sloped lot with two gates and a corner post in clay sits near the top. Every scope and allowance is written before work starts, and if the job changes midstream, you get a written change order first. The work itself carries our 90-Day Done Right Promise, and materials carry the manufacturer’s warranty on top of it.

DIY or Call Us?

You can safely take measurements, photograph the post cap and rail, check a gate hinge for loose bolts, and note which panels flex when you push on them. Tightening a latch screw is fine to do yourself. What we’d stop you at is resetting posts or repairing a gate frame. A steel Ameristar gate weighs more than it looks, a loose post can tip without warning, and one of us has seen a homeowner try to shim a moving post with a brick and end up with the gate landing on their foot.

If a post is moving or a gate has dropped, that’s the point to call. We’ll send someone out, look at the series, and give you a written price before anything gets ordered. Call (888) 590-9867 for a free estimate, and if you want a second opinion on a written quote you already have, that’s free too.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch