Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Kitchen Remodeling: The Arlington Owner’s Guide
Ameristar kitchen remodeling in Arlington typically runs $14,000 – $45,000 installed, with a small kitchen or a single-component replacement (cabinets only, countertops only, backsplash only) landing at the low end. If you already know which component is failing, we can usually give you a firm written estimate over the phone after a short conversation about your layout. Here’s how most Arlington owners find us: a door that used to close with a soft click now slams. A cabinet box that sat flush against the wall in 2019 has a hairline gap at the top corner. A drawer bottom sags under the weight of cast iron. Sometimes it’s a backsplash tile that’s lifted off the wall behind the range, or a countertop seam that’s opened up a quarter inch. These are the phone calls we get from Arlington homeowners who bought an Ameristar kitchen, liked it, and now need someone who will look at it honestly instead of selling them a full gut remodel.
Which Ameristar Models This Applies To
Ameristar isn’t one catalog – it’s a family of product lines that changes meaningfully between product generations. The model or series code is almost always on a label inside a cabinet door, on the underside of an upper cabinet, or on a sticker on the back panel of a base unit. If you can’t find it, a photograph of the hinge plate, the drawer glide, and a tape measure laid across the cabinet opening tells us almost everything. Ameristar trim and toe-kick profiles, in particular, have changed width and reveal over different production runs, and a replacement door that “looks right” from across the room can be off by an eighth of an inch at the reveal. OEM part vs. quality aftermarket is a real decision. For cabinet hardware and interior fittings, a quality aftermarket equivalent often outlasts OEM in Texas humidity. For door finishes and profile matches, OEM is the safer path because a finish mismatch on a kitchen that’s only a few years old is impossible to hide. We’re an independent provider – not affiliated with Ameristar – which means we can source either, and we’ll tell you which one is worth the money.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Kitchen Remodeling Is Failing
- Cabinet doors that won’t stay closed or won’t sit flush. Usually a worn hinge or a hinge plate that has stripped out of the cabinet frame. The plate, not the door, is the failure 80% of the time.
- Drawers that bind, sag, or fall off the glide. Undermount glide failure or a drawer box that has swollen from moisture. Arlington’s summer humidity swings cause more drawer-box failures than actual wear does.
- A backsplash tile that’s lifted or sounds hollow when tapped. Adhesive failure behind the tile, often traced to a substrate that wasn’t prepped correctly. Left alone, the tile eventually releases.
- A visible gap or shadow line at the cabinet-to-wall joint. The cabinet has pulled slightly from the wall, or the wall itself has moved. Either way, the fix starts with understanding which one moved.
- A countertop seam that’s opened up or darkened. Seam failure or moisture intrusion at the joint. On natural stone and quartz alike, that’s the seam losing its bond, not the slab itself failing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Straight installed pricing for Arlington, no phone-quote games:
| Work | Installed Range |
|---|---|
| Kitchen remodel (full scope) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: cabinet count and cabinet grade, countertop material and edge profile, whether plumbing or electrical has to move, and how much demolition is involved. Parts plus labor are itemized on the written estimate – you see the hardware line, the material line, and the labor line separately, so you’re never paying cabinet-installation labor rates for a hinge swap. Every price change gets a written change order before any work moves. Every eligible job gets permits pulled and inspections signed. And every completed job is covered by the 90-Day Done Right Promise, written on the contract, not buried in fine print.
DIY or Call Us?
There’s a short list of things an owner can safely check: tightening a loose hinge screw, confirming a glide is seated by hand, measuring the cabinet opening, and photographing the model label. That’s the safe zone. Where DIY goes wrong on an Ameristar kitchen is at the structural connection points – pulling a cabinet box off the wall to chase a wall gap, prying a backsplash tile that’s bonded to drywall, and resetting a countertop seam. Two of those three can cause water damage behind the wall, and the third can drop a slab on your foot. We’d rather look at a photo than have you pry something loose. Call (888) 590-9867 and we’ll talk through it – if it’s a simple fix, we’ll say so.
FAQs
How long should an Ameristar kitchen last in Arlington? Most Ameristar kitchens hold up well for 15 to 20 years in a normal Arlington household, with cabinet hardware and drawer glides being the first to need attention, usually in the 7 to 10 year range. Countertops and cabinet boxes typically outlast the hardware and trim by a wide margin.
Can my Ameristar kitchen be repaired instead of fully replaced? Yes, in most cases. Cabinet boxes, countertops, and backsplash are all individually repairable or replaceable, and a single failing component rarely justifies a full remodel. We’ll tell you plainly if repair is the better call. Call (888) 590-9867 for a free estimate and a second opinion on any written estimate you already have.
How long does a component swap take? A hardware or glide swap is usually a couple of hours on site. A cabinet door replacement is typically a half day if the part is sourced in advance. A backsplash or countertop section replacement runs one to three days once the material is on hand.
How do you source the Ameristar part? We identify the model and series from the label or photographs, then source OEM or a matched aftermarket equivalent depending on which one is the better call for your kitchen. You’ll see the parts cost itemized on the written estimate before we order anything. Our crew members have up to 28 years of experience with cabinet and finish work, and every job is backed by the 90-Day Done Right Promise.
If we also need to touch other brands in the same kitchen – KraftMaid, Cambria, or Silestone – we handle those too, and it’s all on one written estimate.
Ready to price it? Call Barrett & Sons Construction Arlington at (888) 590-9867 for a free estimate. We’re an independent provider, not affiliated with Ameristar, and we’re happy to look at a photo of what’s failing before you commit to anything. Written change orders before any scope change, permits pulled and inspections signed on eligible jobs, and a 90-Day Done Right Promise on every completed job. $40 off any repair over $200. Free second opinion on any written estimate. No trip charge inside the county. Permanent 10% Senior & Veteran discount.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.