Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Atlas Kitchen Remodeling: The Arlington Owner’s Guide
Atlas kitchen remodeling work in Arlington runs $14,000 – $45,000 installed, and the number that matters is the one written on your estimate before work starts, not the one quoted over the phone. If you’re here because a cabinet door is sagging, a drawer glide is grinding, or the finish on an Atlas door front is peeling after a few Texas summers, you’re in the right place. We pull the failed piece, match it to your Atlas series, and quote the swap in writing. Barrett & Sons Construction Arlington is an independent service provider and is not affiliated with Atlas.
Key Takeaways
- Full Atlas kitchen remodels in Arlington: $14,000 – $45,000.
- Cabinet-only replacement: $4,000 – $13,000. Countertops alone: $2,000 – $6,500.
- Identify your Atlas series from the label inside the cabinet door before ordering anything.
- Every priced change gets a written change order before work proceeds.
- We also source and install KraftMaid, Cambria and Silestone when a match isn’t possible.
Which Atlas Models This Applies To
Atlas has built cabinet lines for a long stretch of years, and the part that fits a 2011 Arlington kitchen often won’t fit the 2019 door on the same wall. The label inside the cabinet door or on the back of a drawer box is the first thing we look for. It carries the series name and usually a date code. If the label is gone, we measure the opening, the overlay (the amount the door covers the frame), and the hinge bore spacing, because those three numbers decide compatibility more than any model name will.
The OEM-versus-aftermarket question matters here. Atlas-branded hinges and drawer glides can be slow to source for discontinued series, and the aftermarket equivalent from a known hardware maker often costs less and lasts longer. For door fronts and finished panels, we push toward the OEM match whenever the series is still in production, because a mismatched sheen on one door in a run of eight is something you’ll see every morning. For structural and finish work, the honest split is this: hardware swaps are commodity work, finish matching is not.
One compatibility gotcha worth knowing: Atlas cabinet runs from the mid-2000s often used a 32mm system bore for adjustable shelving, which is compatible with most standard shelf pins today. Runs from the late 1990s and earlier may not be. If your Arlington home was built in that window, measure before you buy pins off a shelf.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Atlas Kitchen Remodeling Is Failing
- Doors that no longer sit flush. The hinge plate has worked loose from the frame, or the overlay hinge has worn past its adjustment range. In Arlington’s summer humidity, the cabinet box itself swells slightly and the door rides out of alignment.
- Drawer glides that grind or stick. The nylon rollers have flat-spotted or the slide has lost its tension. This is the single most common Atlas drawer failure we see, and it usually starts on the drawer you use most.
- Finish peeling or lifting at the door edges. Moisture gets into the seam and the laminate or veneer lifts. Arlington’s swings between humid summers and dry winters are hard on any door front that wasn’t sealed well at the factory.
- Cracks at the cabinet stile or rail joints. The glue line has failed or the fasteners have backed out. This shows up in kitchens over a certain age and in homes where the cabinets were installed against an exterior wall with no vapor barrier behind them.
- A soft or spongy toe kick or cabinet bottom. Water has been getting under the cabinet, usually from a slow sink or dishwasher leak. This one needs attention before the cabinet box is compromised, not after.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed prices for Atlas-compatible kitchen work in Arlington, with parts and labor in one written line-item quote:
| Scope | Installed range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: how many cabinets or doors you’re replacing, whether the counter has to come off to get to the cabinet, and whether the sink or dishwasher plumbing has to be moved. Parts and labor are priced separately on the estimate, so you can see exactly what the hardware costs versus what the install costs. The work carries our 90-Day Done Right Promise, written on the contract. Every scope change arrives as a written change order before we touch the job.
DIY or Call Us?
Some of this you can handle yourself. Tightening a loose hinge plate, adjusting a Euro-style hinge with a screwdriver, replacing a standard 32mm shelf pin, and swapping a drawer glide on a cabinet where the old slide comes straight out are all reasonable weekend work if you’re comfortable with a screwdriver and a level.
Where it goes wrong: matching a finish sheen across a run of doors, cutting in a new countertop opening, and anything involving the plumbing under the sink. Get those wrong and you’re patching a cabinet box or re-doing a counter, which costs more than the original install would have. And before you touch a cabinet that shows water damage, find the leak first. Call (888) 590-9867 and we’ll price it honestly. A second opinion on any written estimate is free.
FAQs
Twenty to thirty years for the cabinet boxes, and ten to fifteen for the hinges and drawer glides if they’re the original hardware. The finish on door fronts takes the hardest hit in Arlington’s climate, and most homeowners see the first peeling or lifting somewhere around the fifteen-year mark.
Often, yes. A worn hinge or drawer glide is usually a swap, not a rebuild, and a door that’s out of alignment is usually a hinge adjustment. Finish failures and cracked joints are the ones that don’t repair cleanly, because you’re matching a surface, not fixing a mechanism. Call (888) 590-9867 for a free look.
A hardware swap on a run of cabinets is typically a half day. A cabinet replacement or a countertop swap takes longer, and the estimate tells you the schedule before you sign. We don’t promise same-day on planned work, because nobody installs a kitchen in a day and you deserve a real date on the calendar.
We identify the series from your cabinet label or from measurements, then order the correct OEM part if the series is still in production, or a compatible equivalent from a known brand if it isn’t. We don’t carry parts on a truck and we don’t stock Atlas parts, so sourcing takes a few days. That’s honest, and it’s better than a wrong part under a wrong door.
Barrett & Sons Construction Arlington has been owner-operated since 1998, and Tom Barrett publishes his name, his address, and his license number because you should be able to look them up before you sign anything. Our crew members have up to 28 years of experience, they’re background-checked and uniformed on every visit, and a live person answers the phone 24/7. Current standing offers: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% Senior & Veteran discount. Call (888) 590-9867 for a free estimate on your Atlas kitchen work in Arlington.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.