A Barrett company - serving Arlington, TX

Barrette Home Additions & ADU in Arlington, TX

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Barrette Home Additions & ADU: The Arlington Owner’s Guide

If you’re planning a Barrette home addition or ADU on your Arlington property, a well-built addition typically runs $45,000 – $130,000 installed, and a detached ADU often lands between $90,000 – $220,000 depending on size and finish. We schedule these as planned projects, not same-day swaps – additions take weeks of permitting and framing, and anyone promising otherwise is cutting corners you’ll pay for later.

Call (888) 590-9867

Most Arlington owners don’t “discover a failed part” in an addition the way they would a broken garage spring. Instead, the story starts with a failing structure: a sunroom frame that’s pulling away from the house, a converted garage with a sagging header, or a Barrette-supplied modular shell where the tie-in to the existing roofline has started to separate. That’s the point where the homeowner calls us, usually after another contractor waved off the permits.

Which Barrette Models This Applies To

Barrette makes structural and finish components that show up in additions and accessory dwelling units – things like deck framing systems, post bases, connectors, and modular shell hardware. If your Barrette label is still on the post base or the connector plate, read the stamped series code before you call anyone. The code tells us the load rating and the fastener schedule we need to match. Arlington homes built in the 1980s and 1990s often use an older Barrette post base series that isn’t interchangeable with the current line, and that’s the compatibility trap we see most.

For OEM versus aftermarket: Barrette OEM hardware is worth it on load-bearing connectors and post bases, because the stamped rating is what the inspector checks. For non-structural trim, brackets, and finish hardware, a quality aftermarket equivalent is fine and often faster to source. We’re upfront about which is which on your quote. We’re an independent service provider here in Arlington, not affiliated with Barrette, so we match your part to your model rather than pushing a brand we’re tied to.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Barrette Home Additions & ADU Is Failing

  • Gaps where the addition roofline meets the house. Water is getting behind the flashing. On Barrette modular tie-ins, the sealant and flashing detail is the first thing that gives way after a few North Texas summers.
  • Post bases rusting at the concrete. Poor drainage at the slab wicks moisture into the base plate. A rusted connector loses its rated capacity quietly – you won’t see it until the deck or floor framing starts to give.
  • Sticking doors and windows in the addition. The addition is settling differently from the main house. This points to a header or footing issue, not a window problem.
  • Bouncy or squeaking floor framing. Fasteners or hangers have loosened. On a Barrette-supplied system, the whole fastener schedule needs rechecking, not just the noisy spot.
  • Visible rot at the sill plate or base of the framing. Water has been sitting where the addition meets grade. Left alone, this is structural, and Arlington’s clay soil makes it worse as the ground moves season to season.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Arlington, a home addition runs $45,000 – $130,000 installed. An ADU project runs $90,000 – $220,000, and a garage conversion sits at $30,000 – $80,000. The range comes down to square footage, foundation work, roof tie-in complexity, and finish level – not the Barrette hardware itself, which is a small slice of the total. What drives the top of the range is usually a foundation or roofline problem the previous build left behind.

Every quote is line-item, parts and labor separated, with a written change order before any scope change touches the job. Permits are pulled and inspections signed on the addition, because in Arlington that inspection is your protection. The 90-Day Done Right Promise is written on the contract: if the work isn’t right, Tom comes back and makes it right on one call.

DIY or Call Us?

You can safely check the outside yourself: look for gaps at the roofline tie-in, rust at post bases, and any soft spot where the sill plate meets the ground. Take photos and measure.

What you shouldn’t do is re-flash a roofline, re-hang floor framing, or reset a header on an addition. Those are structural, and a bad repair on a load-bearing system can fail slowly and dangerously. We’d rather you call before you cut. Dial (888) 590-9867 and we’ll walk you through what you’re seeing, free. The second opinion on any written estimate is free too, and if you’re a senior or veteran, your permanent 10% discount applies.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch