Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Roofing: The Arlington Owner’s Guide
We install and replace Barrette roofing components for Arlington homeowners, and most Barrette roof repairs here land between $400 and $1,800 installed, with full roof replacement running $8,000 to $20,000 depending on size, pitch and material. Whether a repair can be done the same day depends on the part and the supply house, and we’ll tell you straight when you call rather than promise a date we can’t keep. Most owners find us the same way: a shingle lifts after a spring hailstorm, a ridge cap goes loose in a north wind, or a water stain shows up on the ceiling before the roof ever leaks into the room. That’s the moment you want a real match, not the closest thing on a shelf. Barrett & Sons Construction Arlington is an independent service provider and is not affiliated with Barrette.
Which Barrette Models This Applies To
Barrette makes both vinyl fencing and roofing products, and the Arlingon reader who lands on this page is usually chasing a shingle, ridge cap, starter strip or edge metal that needs to match what’s already on the house. The first thing we do is not guess. We read the label on the end of a bundle if one is still in the garage, or we measure an existing shingle’s exposure (the visible height, commonly around 5 to 5-3/4 inches on standard three-tab and architectural product) and check the profile and color name against the manufacturer’s current and legacy lines. Color names get retired quietly, and a color that matches on paper can read a shade off in Texas sun that has weathered the old material for years.
On the OEM-versus-aftermarket question for Barrette specifically: if the roof is under a manufacturer warranty, matching the same line protects it, and we’ll say so. If it isn’t, a quality equivalent from a name you can look up is often the honest choice, and we’ll write the difference on the estimate either way. We don’t claim to stock Barrette parts, and nothing rides on a truck. We source what the job needs and tell you the lead time before you commit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Roofing Is Failing
- Granules in the gutter or at the downspout base. The protective mineral surface is shedding, which means the asphalt is aging faster than the shingle’s face suggests. In Arlington’s summer heat, that happens sooner than the manufacturer’s literature implies.
- A lifted or creased shingle after a hailstorm. Storm-driven hail bruises the mat underneath, and the damage often shows as a soft spot or a fracture line rather than a hole. This is the single most common reason we get called after a spring squall line rolls through.
- Loose ridge caps or edge metal. High wind works the fasteners loose at the most exposed points, and once a cap lifts, water gets behind the field shingles. That’s a part replacement, not a whole-roof job, if it’s caught early.
- Water stains on a ceiling or in the attic decking. The roof is already leaking, and the stain is the last sign, not the first. A repair at this stage is still usually in the hundreds, not the thousands.
- Curling or clawing shingle edges. Heat cycling and poor attic ventilation both cause it, and it tells you the material is near the end of its useful life in this climate.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Arlington, expect a Barrette roof repair to run $400 to $1,800, and a full roof replacement to run $8,000 to $20,000. The range is driven by roof size and pitch, how many layers have to come off, whether decking needs repair, and the material line you choose. A metal roof, if that’s where you’re headed, runs $15,000 to $40,000; tile roof repair sits at $600 to $2,500.
Our estimates are line-item and written: material, labor, tear-off and disposal, each on its own line. If something changes once we’re on the roof, you get a written change order before any work continues. No surprise invoices at the end. Every eligible job has permits pulled and inspections signed, and every completed job carries the written 90-Day Done Right Promise: if it isn’t right, one call brings us back.
We also install KraftMaid, Cambria and Silestone on interior work, in case the same visit touches a kitchen or bath.
DIY or Call Us?
There’s honest work a homeowner can do here, and honest work they shouldn’t. You can walk the yard after a storm and photograph granules in the gutter, check the attic for daylight or staining, and look at the roof from the ground with binoculars for lifted caps. Those checks cost nothing and tell you whether to call.
What we don’t recommend is climbing onto the roof to patch it yourself. Steep pitch, hot shingles that get slick, and a fall risk that no saved labor bill is worth. Roof repair done wrong also voids manufacturer warranties and can hide a leak that keeps eating decking. That’s the moment to call. Arlington homeowners can reach (888) 590-9867 for a free estimate, and we’ll tell you whether it’s a repair or a replacement before you spend a dime.
FAQs
Barrette’s architectural shingles are typically rated for 25 to 30 years, but in Arlington’s heat and hail, real-world life is often shorter for the field shingles and much longer for edge metal and ridge caps if they’re installed right. Attic ventilation is the biggest lever you control, because trapped heat ages the whole roof faster than the sun alone.
Yes, if the damage is localized to a few shingles or a section of ridge cap, a repair typically runs $400 to $1,800 and often solves the problem. If the shingles are curling across the whole roof or the decking is soft in several places, replacement is the honest answer. Call (888) 590-9867 for a free estimate and we’ll tell you which it is.
A localized repair is usually a same-day job once the material is in hand, and a full replacement typically takes one to three days depending on size and weather. We schedule around Texas rain and won’t start a tear-off we can’t button up the same day.
We source it from local supply houses and the manufacturer’s current line, and we verify the profile and color against what’s on your roof before quoting. We don’t claim to stock parts or carry them on a truck; we tell you the lead time up front, and if a legacy color is discontinued, we’ll show you the closest current match with a sample in hand.
Ready to price it? Call Barrett & Sons Construction Arlington at (888) 590-9867 for a free estimate on your Barrette roofing repair or replacement. A live person answers 24 hours a day, seven days a week, and every price change reaches you in writing before a nail moves.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.