Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Bathroom Remodeling: The Arlington Owner’s Guide
Bathroom remodeling in Arlington that uses Belgard hardscape and surface products typically runs $9,000 – $28,000 installed, with small baths landing closer to $5,000 – $12,000. We handle the whole job, from tear-out to the last bead of grout, and we quote it in writing before anything moves. Same-day emergency service isn’t something we promise on remodel work, because nobody rebuilds a bath in an afternoon and anyone telling you otherwise is quoting you a bill you’ll pay for later. Most Arlington homeowners come to us after something has already gone sideways: a tile field that’s lifting near the shower threshold, grout that keeps cracking no matter how often it’s patched, or a Belgard surface that’s holding water instead of shedding it. That’s the signal this page is built for.
Which Belgard Products This Applies To
Belgard is best known for pavers and retaining wall systems, and homeowners here in Arlington often use their hardscape and surface lines in wet areas, on porch-adjacent bath additions, or in a renovated shower base and floor deck. Before we order anything, we identify the exact product line from the piece itself, not from memory. Look for a stamp or imprint on the underside of a paver-style tile, check the original project paperwork if the previous owner saved it, and measure the actual installed dimensions, face to face. Belgard has changed dimensions across product generations, and a piece that looks identical can be 3/16 inch off, which is enough to throw a shower slope or a floor transition out of tolerance.
Choosing between factory-matched Belgard product and a quality aftermarket equivalent is a real decision, not a sales pitch. OEM Belgard gives you an exact color and dimension match and keeps any warranty line intact. A good aftermarket match can save money on a small repair, but color lots drift between production runs, so a patch in the middle of a floor often reads different from the original. If only one piece failed and the rest is sound, we lean toward matching what’s there. If the whole floor is failing, a clean replacement is usually the better money. Barrett & Sons is an independent contractor and not affiliated with Belgard; we install their products like we install KraftMaid, Cambria, and Silestone, on the strength of the material and the work behind it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Bathroom Surface Is Failing
- Grout cracking in the same line, season after season. In Arlington, the swelling and shrinking of wood framing under a bath floor opens joints that were fine when installed. Re-grouting without addressing the movement underneath just resets the clock.
- Hollow sound when you tap a tile or paver near the shower or tub. A hollow tap means the bond coat has let go. Water gets into that void, and the piece is one heavy step from lifting.
- Water pooling in a corner instead of running to the drain. A base that has settled or was set with too little slope will hold water. Standing moisture drives mold in the framing within a season or two.
- Efflorescence, the white chalky bloom on a surface or grout line. That’s salts pushing out as moisture moves through the assembly. It’s a symptom of a leak path, not a stain to scrub off.
- Loose or shifting pieces around the perimeter. Edges take the most traffic and the most water. When perimeter pieces rock underfoot, the failure is usually spreading inward.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included in Arlington
Bathroom remodels in Arlington run $9,000 – $28,000. A small bathroom remodel sits at $5,000 – $12,000. A walk-in shower installation is $4,500 – $12,000, a tub-to-shower conversion is $3,500 – $10,000, a straightforward shower replacement is $3,000 – $8,500, and a bathroom vanity installation runs $800 – $3,000. What drives the number up is substrate repair once we open the floor, waterproofing done to spec, and the fixture grade you pick. What keeps it down is a scope that’s honest from the start.
We quote parts and labor on separate lines so you can see what you’re paying for the material and what you’re paying for the install. Every allowance is written on the contract. Every scope change arrives as a written change order before work happens, because an allowance that isn’t on paper is a surprise waiting for a date. All work is backed by our 90-Day Done Right Promise, and eligible jobs get permits pulled and inspections signed.
DIY or Call Us?
You can safely identify the product, measure the failed piece, and check for hollow spots with a tap. That’s useful information, and it speeds up an estimate.
What we don’t recommend is tearing into a shower base, a waterproofed floor, or anything tied into the drain line on your own. Waterproofing has to be continuous and it has to tie correctly into the drain flange. A weekend attempt that gets it wrong looks fine for a month, then rots the framing under a $12,000 floor. The repair cost after a failed DIY is often higher than the original install would have been.
Call (888) 590-9867 and we’ll walk the bath with you. Estimates are free, and we’ll give you a written second opinion on any estimate you already have.
FAQs
A properly installed Belgard tile or paver surface in an Arlington bath typically lasts 15 – 25 years, but the waterproofing beneath it is the limit, not the product. Texas heat and humidity work on the assembly more than the surface, so the grout and membrane are what you’re really maintaining. Failure usually shows up as grout cracks and hollow spots long before the piece itself wears out.
Sometimes, yes. A single failed piece with sound substrate behind it can be cut out and replaced, and we do this on a regular basis. What we can’t repair honestly is a widespread hollow field or a base that’s holding water, because the problem is underneath. We’ll tell you which one you’re facing on the estimate, in writing.
A single-piece replacement is usually a day’s work. A shower replacement runs 3 – 5 days, and a full bathroom remodel runs 2 – 4 weeks depending on substrate conditions and inspection timing. We schedule it out, don’t rush it, and don’t promise same-day on remodel work.
We identify the exact product line from the installed piece or your original paperwork, then order through Belgard’s distribution channel or a matched aftermarket source depending on availability and color match. Every material line is written on the quote before we order, so you know exactly which product is going in and what it costs.
Barrett & Sons Construction Arlington installs Belgard along with KraftMaid, Cambria, and Silestone. We’re owner-operated, founded in 1998, and every job is backed by the 90-Day Done Right Promise. Call (888) 590-9867 for a free estimate. A live person answers, day or night.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.