Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Home Additions & ADU: The Arlington Owner’s Guide
We build Belgard home additions and ADUs in Arlington at a typical installed price of $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU, with garage conversions landing between $30,000 and $80,000. Belgard itself makes the hardscape and masonry products that anchor the outdoor footprint – the paver patios, walkways, and retaining walls your addition’s foundation and floor plan sit on or beside. When the Belgard base beneath an addition starts shifting, owners usually spot it the same way: a hairline crack that runs up through the interior drywall and lines up perfectly with the out-of-level patio outside, or a door that won’t latch because the slab edge has dropped.
Key Takeaways
- Belgard is the hardscape layer, not the whole structure – we build the addition and get the Belgard base right underneath it.
- Addition pricing in Arlington runs $45,000 – $130,000; an ADU runs $90,000 – $220,000.
- Every eligible job gets permits pulled and inspections signed.
- We’re an independent Arlington builder, not affiliated with Belgard – we install and repair to Belgard’s spec.
Which Belgard Models This Applies To
Belgard’s product families split into the base and finish pieces we care about on an addition: the structural retaining blocks (Belgard Brilliance, Aberdeen, Mini-Belgian) and the step and cap pieces that tie a patio or walkway to a structure. Compatibility matters more than owners expect. A Brilliance wall block and an Aberdeen wall block are not the same depth or the same locking profile, and if a prior crew mixed the two on your project, the wall’s ability to hold lateral soil pressure changes. That’s the gotcha: matched-product walls hold; mismatched walls creep.
To identify what you have, look for the stamped name on the back of a block, or measure a block face and depth and compare it to Belgard’s published spec sheet. When repairing, an exact-match block from the same series is the right call for anything structural; for cosmetic caps and borders, a quality aftermarket paver that meets the same dimension and compressive spec is a fine, cheaper substitute. We source to spec, never from a mystery pallet, and we don’t claim to keep parts on a truck – we order for your job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Home Additions & ADU Is Failing
- Patio or walkway edge that’s dropped 1/4 inch or more. Base compaction failed under the Belgard units, often from a wet-weather install. The addition’s footing is fine; the hardscape seated against it is settling.
- Blocks that rock when you step on them. The bedding sand has washed out, most often from a downspout dumping water against the wall. Left alone, the adjacent slab edge starts to lose support too.
- A retaining wall leaning more than 1 inch over its height. Bury depth or geogrid was shorted. This is the one that can actually threaten an addition’s floor structure if the wall is below grade.
- Step risers separating from the addition’s sill. A common Arlington failure – the hardscape moves and the structure doesn’t. Caulk lines open up and now water gets in during a North Texas gully-washer.
- Cracks tracking through an interior slab or drywall corner aligned with outdoor Belgard. Differential movement between the hardscape and the structure. Worth a look before it becomes a foundation bill.
Our crew members have up to 28 years of experience on this kind of structural-to-hardscape tie-in, and they know what a Texas summer does when base prep was rushed.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
An addition in Arlington runs $45,000 – $130,000 installed. What drives the range: square footage, whether the Belgard patio and walkway get replaced or repaired, foundation and footing work, and how much of the existing structure can stay. A garage conversion to living space runs $30,000 – $80,000; a full ADU runs $90,000 – $220,000. If the Belgard base itself is what failed, a paver patio re-set runs $3,500 – $11,000 and a paver driveway $7,000 – $18,000. Every scope, allowance, and price change arrives as a written change order before work starts – we quote line by line so you can see parts and labor separately, and we back the whole job with the written 90-Day Done Right Promise.
DIY or Call Us?
You can safely check what you’ve got: measure the dropped edge, photograph a damp patch after rain, and note which way the wall leans. That’s useful info. What you shouldn’t take on is re-setting structural Belgard wall units or re-grading around an addition’s footing – improper backfill and bury depth is exactly what fails a wall under North Texas clay and repeated wet-dry cycles, and loading a wall wrong can undermine the floor above it. DIY pavers that sit on the wrong base are a costly redo. Call (888) 590-9867 and we’ll tell you honestly whether it’s a re-set or a rebuild, with a free estimate.
FAQs
The structure lasts into the decades; the vulnerable part is the hardscape base, which typically holds 15 – 25 years when it was built with proper compaction, depth, and drainage. North Texas clay and our wet-dry swings shorten that if a downspout or grade is dumping water against it – drainage is what buys you the back half of that range.
Often yes. If the blocks are sound and only the bedding sand washed out, we re-set the affected units on fresh base and fix the drainage – far cheaper than a rebuild. If the wall itself has leaned or the addition’s footing shows movement, it’s a rebuild. Call (888) 590-9867 for an honest look – estimates are free.
A hardscape re-set runs 2 – 4 days; a full addition takes weeks to a few months and an ADU runs longer, depending on size and permits. We pull the permits and get the inspections signed, so the schedule is honest from the start.
We match your exact series – Brilliance, Aberdeen, or whichever line is stamped on your block – using spec sheets, and order for your job rather than substituting a cheaper look-alike. For structural units, exact-match is non-negotiable; for cosmetic pieces we’ll tell you where a quality equivalent saves money. We also install KraftMaid, Cambria, and Silestone when the project reaches the interior.
Give us a call at (888) 590-9867 to schedule your free estimate with Barrett & Sons Construction Arlington. A live person answers 24/7, and we’ll send written scope and pricing before any work begins.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.