A Barrett company - serving Arlington, TX

Caesarstone Home Additions & ADU in Arlington, TX

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Caesarstone Home Additions & ADU: The Arlington Owner’s Guide

We build and finish home additions and ADUs in Arlington that use Caesarstone quartz surfaces where they belong: kitchenettes, island tops, vanity counters, laundry folding stations, and exterior bar tops in covered patios. Additions in Arlington run $45,000-$130,000 depending on square footage and how much plumbing moves, and a stand-alone ADU runs $90,000-$220,000. Most of this work is planned, permitted, and inspected, so we schedule it like the real construction job it is rather than promising a same-day install.

Call (888) 590-9867

Owners usually find trouble in one of two ways. Either the Caesarstone top in their finished addition chips at the sink edge, or a slab seam lifts near the range because the cabinet run under it wasn’t shimmed flat. Both look like stone failures and usually turn out to be framing or install problems underneath. That distinction is what this page is about.

Key Takeaways

  • Caesarstone quartz is manufactured stone, not natural slab – it can’t be re-polished at a chipped edge the way granite can.
  • Most “failed” counters in Arlington additions trace back to cabinet deflection or a bad seam, not the stone itself.
  • Full additions in Arlington: $45,000-$130,000. Detached or garage-conversion ADUs: $90,000-$220,000.
  • Every job gets permits pulled and inspections signed, with a written change order before any scope moves.

Which Caesarstone Models This Applies To

Caesarstone doesn’t build addition parts – it supplies quartz surfacing in a few standard thicknesses and classifies its colors into collections. The relevant distinctions for a Texas addition are the 2cm (3/4-inch) and 3cm (1-1/8-inch) thicknesses and the edge profiles. Island tops and bar tops over a knee wall want 3cm; a low-traffic laundry counter in a 2cm slab needs a plywood substrate underneath or it will flex over time. Any slab that sits near an exterior door in Arlington needs to be rated for the temperature swing that comes with our summers, and a solid-color Caesarstone is more forgiving there than a heavily veined pattern with a thin facing.

To identify what you actually have, look at the sticker on the underside of the slab or the fabricator’s stamp near a sink cutout. If neither is there, measure the edge thickness: about 3/4 inch is 2cm, about 1-1/8 inch is 3cm. For the OEM-versus-aftermarket question, Caesarstone quartz itself is always Caesarstone – there’s no aftermarket equivalent that matches a specific colorway, so any replacement slab has to come through an authorized Caesarstone fabricator in the Dallas-Fort Worth area. The edge profile, however, can be matched locally by any shop with the right tooling. When a top is being replaced, we often price Cambria or Silestone alongside the Caesarstone number so you can see the comparison before you commit.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Caesarstone Home Additions & ADU Is Failing

  • A chip at the sink or cooktop edge. Caesarstone is dense and chips cleanly rather than crumbling, which means a repair is a visible patch unless a fabricator cuts it back. Chips at cutouts are almost always from a tight radius that left too little material around the opening.
  • A seam that reads as a dark line or feels raised under your fingertip. Seams in quartz fail when the two pieces weren’t leveled before the epoxy set. In Arlington’s heat, a seam near a south-facing window will telegraph any movement in the base cabinets within a couple of years.
  • Deflection when you press on a counter. If a counter in a new addition gives even slightly, the cabinet run or substrate underneath is the problem. Quartz won’t bend, so eventually it cracks instead – often right over an undermount sink.
  • Ring stains or a dull patch that won’t clean out. Quartz is non-porous, so a stain that survives normal cleaning usually means resin damage from heat – a hot pan set down on the surface, or a slow cooker run for a full day in a finished ADU kitchenette.
  • Separation at the wall or backsplash joint. A visible caulk line in an addition is often normal settling in the first year, but if it opens, re-caulks, and opens again, the framing over the window header is worth inspecting.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Replacing a Caesarstone top as part of a larger addition scope can’t be priced alone – it lives inside the job. Here’s what the surrounding work runs in Arlington, and where a Caesarstone component fits inside each number.

Scope Installed range (Arlington) Where Caesarstone sits
Home addition (full build) $45,000-$130,000 Island, kitchenette, or bar top as part of the finish package
ADU construction $90,000-$220,000 Full kitchen and bath surfacing
Garage conversion $30,000-$80,000 Kitchenette top plus vanity
Countertop installation (standalone) $2,000-$6,500 Fabrication, template, delivery, install
Kitchen island installation $3,000-$10,000 Base cabinet, substrate, Caesarstone top, edge
Bathroom vanity installation $800-$3,000 Vanity plus quartz top with cutout

What drives the range in Arlington is square footage, how far plumbing and electrical have to travel, and whether the addition touches the original roofline. Every allowance and every change gets written down before work moves, so the number on the contract is the number at the end. All our construction work carries the written 90-Day Done Right Promise: if something isn’t right, one call brings us back.

DIY or Call Us?

You can safely handle the small stuff. Measure the thickness, photograph the sticker under the slab, check for deflection by pressing firmly on the counter at a few points, and note whether a seam feels raised to the touch. That information alone often tells a fabricator whether they’re looking at a stone issue or a cabinet issue.

What you shouldn’t do is try to re-set a seam, cut back a chipped edge, or lift a quartz top on your own. Quartz slabs are heavy, they crack without warning, and an undermount sink hung beneath one adds real weight; a two-person lift is a job for a crew with the right suction cups and the right insurance. The counter connections in an Arlington addition also sit close to plumbing and gas lines in some layouts, and that’s not a place to learn by doing. Call us at (888) 590-9867 and we’ll take a look.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch