Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Bathroom Remodeling: The Arlington Owner’s Guide
Cambria quartz bathroom remodeling in Arlington typically runs $9,000 – $28,000 installed, depending on how much of the room changes and which slab you pick. We don’t stock parts and we don’t carry slabs on a truck; we quote the material, the fabrication, the plumbing and the tile in writing, then schedule the work. That price covers a real bathroom: vanity top, shower or tub surround, floor, fixtures and finish work, permits pulled where the job requires them.
Most Arlington owners don’t come to this page because a part failed. They come because the vanity top they bought is a half-inch off, or a seam in their Cambria surround is opening up, or a 1990s bathroom in Dalworthington Gardens finally gave out and they want quartz that won’t stain. Cambria is engineered quartz, so it doesn’t have springs or motors to fail. What fails is the install, the substrate, the caulk joint, or the cutout around a sink. That’s the work we actually fix.
Key Takeaways
- Cambria bathroom remodels in Arlington run $9,000 – $28,000 installed, quoted in writing before work starts.
- Quartz doesn’t wear out. Failed seams, cracked edges and loose sink cutouts are install and substrate problems, not material problems.
- Cambria slabs are sold through authorized fabricators, not as loose parts. We handle sourcing and fabrication as one line item.
- Barrett & Sons Construction Arlington is an independent contractor. We’re not affiliated with Cambria.
- Every eligible job gets permits pulled and inspections signed, backed by the written 90-Day Done Right Promise.
Which Cambria Models This Applies To
Cambria doesn’t sell bathroom parts the way a garage door company sells a torsion spring. There are no model numbers to match. Cambria is a quartz surface brand, and every slab is cut to your room by a fabricator. That matters for how this page works: your “model” is the slab you picked and the dimensions of your vanity, shower or tub deck. The fit is made on site, not pulled off a shelf.
What you’ll want to identify before you call:
- Slab name and thickness. Cambria runs standard 2 cm and 3 cm slabs. Kitchen islands usually want 3 cm. A bathroom vanity can go either way, but 2 cm needs a plywood substrate under it and a built-up edge, which changes the price. Your fabricator’s paperwork will name the slab.
- Existing countertop dimensions. Measure the full length, depth and the sink cutout. A 60-inch vanity top is common in Arlington homes built in the 1980s and 1990s. A 48-inch or 72-inch is a different slab yield and a different price.
- Sink type. Undermount sinks need a different cutout and edge polish than a drop-in. If your sink is original, we may recommend swapping it at the same time since the top has to come off anyway.
On the OEM-versus-aftermarket question: there isn’t one. Cambria is sold through authorized fabricators, and installing it means buying the slab plus fabrication. A cheaper “similar” quartz from an unverified supplier is a different product with a different warranty. We quote Cambria when you ask for Cambria. We also install Silestone if you want to compare, and Kohler fixtures if you’re replacing the sink or faucet at the same time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambria Bathroom Remodeling Is Failing
Quartz is dense and non-porous, so it doesn’t rot, warp or stain the way marble or laminate does. When a Cambria bathroom surface goes bad in Arlington, it’s almost always one of these five things.
- A seam that’s opening or turning dark. Seams are epoxy, not stone. In North Texas, the humidity swing between a steamy shower and dry winter air works a seam joint. If the epoxy has cracked or gone gray, water is getting underneath.
- A crack at the sink cutout or a corner. Usually a fabrication problem: the cutout was made too close to the edge, or the slab was set on an uneven cabinet without proper support. Quartz is strong but it’s brittle at a thin edge.
- The countertop rocking or feeling spongy. That’s a substrate failure, not a slab failure. Cabinets out of level, missing shims or a 2 cm top set directly on the cabinet box with no plywood. Left alone, the slab cracks.
- Caulk line at the wall or backsplash pulling away. Movement in the wall or the cabinet, plus normal seasonal expansion. Easy to re-caulk. Not easy to ignore if water is getting behind it into the drywall.
- Dull spots or etching near the faucet. Usually a cleaning product problem. Quartz doesn’t like abrasive pads or high-acid cleaners. A soft cloth and mild soap is the whole maintenance routine.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Cambria bathroom remodeling in Arlington runs $9,000 – $28,000 installed. What moves you up or down that range:
- Vanity top only, 2 cm Cambria, single undermount sink: $1,800 – $3,800, including removal and disposal of the old top.
- Vanity top, 3 cm Cambria with a built-up edge: $2,400 – $4,800.
- Cambria shower seat or tub deck: $2,000 – $5,500, depending on size and edge profile.
- Full bathroom remodel with Cambria surfaces plus tile floor and shower surround: $9,000 – $28,000.
- Walk-in shower with a Cambria bench and curb cap: $4,500 – $12,000.
Parts and fabrication are one line. Labor is another. You’ll see both on the written estimate before anyone touches a cabinet. Every price change comes as a written change order before it happens, and every eligible job gets permits pulled and inspections signed. The work is backed by the written 90-Day Done Right Promise: if something’s not right, one call brings Tom back.
DIY or Call Us?
Some things you can safely check yourself. Re-caulking a joint at the wall is fine. Tightening a loose faucet is fine. Wiping down the surface with mild soap is the whole maintenance routine and takes two minutes.
What goes wrong fast: trying to reset a slab that’s rocking, or redoing a failed seam. Quartz is heavy. A 3 cm vanity top on a 60-inch run weighs well past what one person should lift alone, and a cracked slab has to be replaced, not patched. Seam repair takes an epoxy color-matched to the specific slab, and a bad seam repair is visible immediately. We’ve seen homeowners crack an edge trying to lift a top off a cabinet to check the substrate, then pay for a new slab anyway.
If you’re not sure whether it’s a seam problem, a substrate problem or a slab problem, call (888) 590-9867 for a free estimate. A live person answers, day or night. We’ll tell you honestly whether it’s a repair or a replacement.
FAQs
Cambria quartz itself should last the life of the bathroom, easily 25 years or more, with no resealing needed. What wears out is the install around it: the seam epoxy, the caulk, the substrate. In Arlington, the swing between a steamy shower and a dry summer is the main stress on those joints, so plan to re-caulk the wall line every few years. Call (888) 590-9867 if you want a free look at a specific seam.
Small chips at an edge can sometimes be repaired with a color-matched epoxy. A full crack through a slab, or a crack at a sink cutout, means the slab comes out. Cambria is engineered quartz, so a patch on a structural crack won’t hold long term. Call (888) 590-9867 for an honest look at which one you have.
A single vanity top swap is usually a one-day job once the slab is fabricated and on site. Fabrication takes longer than the install, and that’s what sets your timeline. A full bathroom remodel runs several weeks depending on tile, plumbing and permits. Call (888) 590-9867 for a schedule that reflects your actual job, not a phone guess.
We source Cambria through the brand’s authorized fabricator network, so the slab, the edge profile and the cutout are all handled by a fabricator who works with the material every day. We don’t stock parts and we don’t carry slabs. We quote the slab and fabrication on your written estimate, you approve the exact slab, and the fabricator cuts to your room’s measurements. Call (888) 590-9867 for a free estimate.
Cambria is a real upgrade for an Arlington bathroom. The slab is likely the last one you’ll ever need to buy for that room. The reason a Cambria job goes sideways is almost never the quartz. It’s the seam, the substrate, the cutout, or a promise made on the phone that didn’t make it onto paper. That’s the part Barrett & Sons Construction Arlington is built around. Every scope, every allowance, and every price change in writing. Permits pulled and inspections signed where the job requires them. The written 90-Day Done Right Promise on every completed job. And a live person answering the phone, not a call center.
If you want a straight answer on whether your Cambria surface needs a repair or a replacement, or what a full bathroom remodel would run in your part of Arlington, call (888) 590-9867 for a free estimate. No trip charge inside the county. We’ll put the scope and the number in front of you before you decide anything.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.