Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Driveway & Pavers: The Arlington Owner’s Guide
We install Cambridge Pavers driveways and hardscape on homes across Arlington, and a full paver driveway typically runs $7,000 – $18,000 installed, with most Arlington jobs landing in the $9,000 – $14,000 range. Cambridge makes a specific system of pavers, joint sand, and edge restraint, and it’s the edge restraint, base prep, and poly sand that fail before the pavers themselves ever do. Homeowners usually find out the hard way: a driveway that was flat in April grows a low spot by August, the joints wash out after a heavy rain, or one corner of the field starts to rut and rock under the tires.
Barrett & Sons Construction Arlington is an independent service provider and is not affiliated with Cambridge Pavers. We install Cambridge-compatible systems and we’ll tell you straight whether your failing parts can be matched, replaced, or repaired.
Which Cambridge Pavers Models This Applies To
Cambridge doesn’t sell “a paver.” It sells families of them: the ledgestone and tumbled styles that dominate the look of older Arlington driveways, the large-format and slab-style pavers that have taken over newer builds, and the permeable systems with open-graded joints that a growing number of homeowners ask about. Each family comes in specific thicknesses and face dimensions, and those dimensions are what decide whether a replacement course will sit flush or telegraph a lip.
To identify what you have, pull up a full paver that’s already loose (a cracked or heaved one near the street edge is easiest), measure length, width, and thickness in millimeters, and look at the underside for a molded mark. Cambridge pavers are commonly 60mm to 80mm thick for driveways, and the face pattern is your fastest fingerprint. Matching by photo alone is where most homeowners get burned: two pavers can look identical from six feet away and lock together like mismatched puzzle pieces when you set them side by side. For an honest match, bring a pulled paver to us. On the OEM-vs-aftermarket question, a Cambridge-specific match is almost always the right call when the rest of the field is healthy. A quality aftermarket paver only makes sense in a small, tucked-away repair area where pattern continuity doesn’t matter, and we’ll say so when that’s the case.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambridge Pavers Driveway & Pavers Is Failing
Driveway pavers fail in patterns. What you’re seeing usually points to one specific cause:
- Ruts and depressions in the wheel paths. That’s base failure, not paver failure. The compacted base under the driveway settled, and no amount of sand or re-laying fixes it until the base is rebuilt.
- Sand washing out of the joints after rain. The polymeric or poly sand has broken down, or the joints were never filled deep enough. Once joints drain, pavers start to shift laterally, and it accelerates.
- A paver rocking or a lip you can trip on. Usually a settled bed, a failed edge restraint, or a driveway that’s shedding water toward the house instead of the street.
- Cracked or chipped pavers concentrated near the street or on the curve. Vehicle loads on the driveway apron are heavier than the rest of the field, and that’s where fatigue shows up first.
- UV-faded color or whitish bloom on the surface. Efflorescence is mineral migration from moisture, and a faded top layer means the sealer is gone. Neither is structural, but both speed up the wear.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Arlington, here are the ranges we quote, using the same numbers across every page:
- Full paver driveway installation: $7,000 – $18,000
- Driveway replacement: $5,000 – $14,000
- Paver patio installation: $3,500 – $11,000
- Driveway sealing: $250 – $700
What moves you up or down inside those ranges: driveway square footage, whether the base has to be excavated and rebuilt, edge restraint replacement, how many paver courses need matching, and whether you’re adding a border or a permeable joint. We price parts and labor separately on the written estimate, so you can see exactly what the pavers and sand cost versus the tear-out and base work. Every eligible job gets permits pulled and inspections signed, and every job is backed by the written 90-Day Done Right Promise. If the scope changes, it changes in a written change order before anyone touches your driveway.
DIY or Call Us?
You can safely do the low-risk checks: pull a loose paver to read the mold mark, measure thickness, photograph the edges, and note where the water pools. That’s real information, and it’s worth having in hand before you call anyone.
Where homeowners get into trouble is the base. Replacing a paver or a course looks easy until you realize the paver was moving because the bed beneath it was failing. Re-laying a paver over a failing base is a spring fix for a summer problem. Full excavation and compaction is real work with real equipment, and an improperly compacted base will re-fail within a season or two. If the failure is confined to a small patch and the base under it is sound, a spot repair is reasonable. If the whole driveway has ruts, or more than a small handful of pavers are involved, call us: (888) 590-9867. The estimate is free.
FAQs
How long do Cambridge Pavers driveways last in Arlington? A properly installed Cambridge paver driveway should last 25 to 30 years or more in Texas conditions, and the pavers themselves often outlast that. What tends to fail earlier is the joint sand and the base, usually within 8 to 15 years depending on drainage and traffic. Keeping joints filled and resealing every few years is what stretches the lifespan.
Can a failing paver be repaired instead of replaced? Often, yes. A cracked paver, a shallow rut, or a washed-out joint can usually be repaired without touching the rest of the driveway, provided the base underneath is still sound. If the base has failed, patching only buys time. We’ll tell you which situation you’re in. Call (888) 590-9867 for an exact quote and a free estimate.
How long does a paver replacement take? A single-paver or small-section repair is typically done in a few hours. A full driveway replacement with base rebuild usually runs three to six days, depending on square footage, drainage work, and whether the base needs excavation. We’ll give you the schedule in writing before we start.
How do you source the matching Cambridge paver for my driveway? We match by pattern, face dimensions, and thickness, using the mold mark and measurements from a pulled paver, and we confirm the match before ordering. We don’t claim to stock parts or carry them on a truck. If an exact Cambridge match isn’t available, we’ll show you the closest aftermarket equivalent and tell you plainly where it differs. Call (888) 590-9867 for a free estimate.
We also work with KraftMaid, Cambria, and Silestone on the interior side, but pavers are what your driveway is about. If your Cambridge Pavers surface is failing, or you’re pricing a new installation, call our team at (888) 590-9867 to schedule your free estimate. We’re local, we answer the phone, and the price you see is the price you get.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.