A Barrett company - serving Arlington, TX

CertainTeed Bathroom Remodeling in Arlington, TX

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CertainTeed Bathroom Remodeling: The Arlington Owner’s Guide

A CertainTeed bathroom remodeling job in Arlington typically lands between $9,000 and $28,000 installed, depending on how much of the room we’re touching and how far the plumbing has to move. When a CertainTeed-related part fails, you usually find out the hard way: a shower that drains slow, a tile backer board that’s gone soft behind a wall, a ceiling stain below the upstairs bath. We install and repair CertainTeed systems across Arlington, and we’ll give you a written line-item quote before anything is ordered. Call (888) 590-9867 to schedule a free estimate.

Call (888) 590-9867

Which CertainTeed Models This Applies To

CertainTeed makes several products that show up in Arlington bathrooms: fiber cement siding on exterior walls, moisture-resistant drywall (their “Mold-X” line is common here), and, on the roof above, shingles that get replaced when a bathroom ceiling starts staining. The material that fails most inside a bathroom is drywall and the gypsum board behind tile.

To identify what you have, look for a printed stamp or edge marking on the back of any exposed panel. CertainTeed boards are marked with the brand and a product code. Measure the thickness: half-inch is standard for walls, five-eighths for ceilings and wet walls. If the marking is gone, match the thickness and the paper color instead. CertainTeed’s green board (moisture-resistant) is distinguishable from standard white board, and used only where water splashes, not as a substitute for a tile backer.

OEM CertainTeed board is the safest match for a part-for-part swap. Aftermarket equivalents from other makers will work for a patch if the thickness and moisture rating line up. We will not sell you a CertainTeed board when a matching generic panel does the job at half the price. You get both numbers on paper and you pick.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CertainTeed Bathroom Remodeling Is Failing

Here’s what an owner in Arlington tends to notice first:

  • Soft or crumbly spots behind the shower tile. Water got behind the tile through a cracked grout joint and the CertainTeed board has swollen. By the time you can feel it through the tile, the panel is already gone.
  • Bubbling paint or loose drywall paper above the tub surround. Steam cycling through the room every morning softens the finish and the paper facing lifts. This is early and easy to catch.
  • A musty smell you can’t track down. Usually moisture trapped behind a wall or under the floor tile, not in the air. A $15 moisture meter is a faster diagnostic than tearing anything out.
  • Ceiling stains directly below the upstairs bath. That’s a plumbing leak onto the board above, and it will rot through within a season in Arlington’s heat if it isn’t found.
  • Cracks running along tape joints at the corners of the room. Movement or ongoing moisture. Cosmetic if it stops. A signal that something behind the wall is shifting if it returns.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Bathroom remodeling in Arlington runs $9,000 – $28,000 installed. A small bathroom remodel runs $5,000 – $12,000. A shower replacement runs $3,000 – $8,500.

A few line items inside that range:

  • Walk-in shower installation: $4,500 – $12,000
  • Tub-to-shower conversion: $3,500 – $10,000
  • Bathroom vanity installation: $800 – $3,000

What drives the range: how much of the room is opened up, whether the plumbing layout moves, the tile selection, and whether drywall or backer board needs to come out. Every line item is written down before work starts. Every change is a written change order before anyone picks up a tool. If it’s not on paper, it isn’t happening. Every eligible job has permits pulled and inspections signed, and every finished job is backed by our 90-Day Done Right Promise.

DIY or Call Us?

What you can safely check yourself: run a fan for two days after every shower and see if the smell clears. Press the wall around the tub for softness. Look under the sink for slow drips. Buy a moisture meter and check a few spots. None of that requires opening a wall.

Where it goes wrong: pulling tile or cutting out drywall to “see what’s behind it” almost always turns a small repair into a bigger one. Once a wall is open, moisture damage hidden behind it needs to be dried, evaluated, and only then replaced. Water that reaches framing or a subfloor is not a weekend project.

If moisture is the question, call (888) 590-9867. We’ll look at it, tell you honestly whether it’s a patch job or a rebuild, and quote it in writing.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch