A Barrett company - serving Arlington, TX

CGI Bathroom Remodeling in Arlington, TX

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Bathroom Remodeling: The Arlington Owner’s Guide

We handle CGI-featured bathroom remodeling across Arlington, with installed projects typically landing between $9,000 and $28,000 depending on scope and fixture count. Small baths come in lower, around $5,000 to $12,000. If your CGI vanity, shower valve, or finish package is part of a failing bathroom, the repair usually starts as a leak hunt and ends as a full replacement – it’s rarely just one part that fails.

Call (888) 590-9867

Most Arlington owners find the problem in one of two ways. Either water starts showing up where it shouldn’t – a soft spot near the shower pan, a stain on the ceiling below, a toilet that rocks after years of sitting on a soft subfloor – or the finish itself goes: grout that won’t hold, caulk that keeps failing, a vanity cabinet with swollen edges. Older baths here tend to fail at the same points because of the way they were built and the way Arlington’s climate treats them.

Call us for a free estimate and we’ll write the scope, allowances, and parts in writing before anything gets ordered.

Which CGI Models This Applies To

We want to be direct about one thing: Barrett & Sons Construction Arlington is an independent service provider and is not affiliated with CGI. We aren’t a CGI dealership and we don’t sell their product. What we do is install and replace bathroom components that match CGI’s product lines, and we’re honest when a genuine CGI part is the smarter buy.

CGI makes bathroom products across a few families – vanities, sinks, faucets and valves, tubs, and finish packages. Model numbers are printed on a label under or behind the fixture, or stamped on the valve body itself. On a vanity, look under the drawer box. On a faucet or shower valve, you may have to look underneath or pull the trim. The model prefix tells you the line; the rest gives size, finish, and configuration.

The OEM vs. aftermarket call matters here. For valve cartridges, aerators, and trim, we usually recommend the genuine CGI part – aftermarket cartridges are often a few thousandths off in dimension and they’ll leak again within a year. For trim rings, handles, and cosmetic pieces, a well-made aftermarket equivalent is fine and often cheaper. For vanity cabinets and sinks, sizing compatibility is what matters most, not the badge on the box.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Bathroom Remodeling Is Failing

Here are the failures we see most often in Arlington bathrooms, and what’s usually underneath them.

  • A shower valve that won’t hold temperature. The cartridge is shot. Hard water here accelerates wear on the internal seals, and once the cartridge starts to stick, adjusting the handle gets harder until it stops working.
  • Water staining on the ceiling below the bathroom. Something is leaking – pan, drain, supply line, or the valve body itself. This is the one to call on quickly, because the damage compounds with every shower.
  • A vanity cabinet with swollen or soft edges. Moisture has gotten into the particleboard or MDF. Once it swells, it doesn’t come back, and the cabinet shortens its own life with every bit of humidity.
  • Grout and caulk that won’t stay put. Movement in the substrate, or water getting behind the tile. New caulk over wet substrate fails again in a few months.
  • A toilet that rocks or a floor that feels soft near it. The flange or the subfloor has failed. It’s a small problem now and a full bath tear-out if it’s ignored through a couple of Texas summers.

If you’re seeing two or more of these, you’re no longer looking at a part replacement, you’re looking at a remodel. Call (888) 590-9867 and we’ll give you a straight answer about which side of that line you’re on.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what Arlington homeowners typically pay, installed – meaning the part, the labor, and the cleanup are all in the number.

Project Installed Range
Bathroom Remodel (full) $9,000 – $28,000
Small Bathroom Remodel $5,000 – $12,000
Walk-In Shower Installation $4,500 – $12,000
Tub-to-Shower Conversion $3,500 – $10,000
Shower Replacement $3,000 – $8,500
Bathroom Vanity Installation $800 – $3,000

What drives the range: finish level, fixture count, whether the valve body or drain needs replacing along with the visible parts, and whether tile has to be removed to reach the problem. Allowances for tile, fixtures, and paint are written into the contract before work starts. Every price change is a written change order issued before we proceed, so the number you signed is the number you pay.

We also install KraftMaid, Cambria, and Silestone when a client wants a brand they can look up. Every job is covered by our 90-Day Done Right Promise.

DIY or Call Us?

Here’s the honest split. You can safely check a few things yourself: look for the model label under the vanity or on the valve trim, wipe the cartridge area dry and watch for a slow drip, and confirm whether the rocking toilet is the flange or just a loose bolt. That kind of inspection is smart and safe.

What we’d rather you didn’t do: pull a shower valve body without shutting off the water and knowing what’s behind the wall, or tear into a subfloor where the leak may have traveled. Water damage rarely stays where it started, and a repair that looks small from the outside can hide rotted framing. When in doubt, call us at (888) 590-9867 – a free estimate costs you nothing, and a bad DIY repair costs you a lot more.

FAQs

How long does a CGI bathroom component last in Arlington? A genuine CGI valve cartridge typically lasts 8 to 12 years here. Hard water and the heat accelerate wear, and homes on well water often see the shorter end of that range.

Can the part be repaired instead of replaced? Sometimes. Cartridge seals, aerators, and trim rings can usually be repaired. Cracked valve bodies, swollen cabinets, and failed subfloors cannot – those get replaced. Call (888) 590-9867 and we’ll tell you which one you’re looking at.

How long does the swap take? A cartridge or trim swap is typically a couple hours. A vanity replacement is a half day. A shower valve body replacement runs a day or more because the wall usually has to open up.

How do you source the part? We pull the model number and order the correct CGI OEM part through supply channels. If the correct part isn’t available, we tell you before work starts, and we never substitute without asking in writing first.

Call (888) 590-9867 for a free estimate. We’ll walk you through the right part, the writing, and the price before anything gets ordered.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch