A Barrett company - serving Arlington, TX

CGI Roofing in Arlington, TX

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Roofing: The Arlington Owner’s Guide

CGI-compatible roof repair in Arlington typically runs $400 – $1,800, and a full replacement runs $8,000 – $20,000 installed. Metal roof work here lands between $15,000 and $40,000. We pull the permit, match the part to your exact CGI series, and put the whole scope in writing before anyone gets on the roof.

Call (888) 590-9867

Most Arlington owners don’t discover a failed CGI roofing component by climbing up and looking. They hear it first. A drip that starts during the March hail season and quiets down by June, or a soft spot near the valley that shows up as a stain on the ceiling below. North Texas heat takes its toll on sealants and flashing, so a small failure that would stay small in a milder climate can open up in one summer here. The earlier you catch it, the cheaper the fix.

Which CGI Models This Applies To

CGI makes roofing components across several series, and the part that fits one line doesn’t always fit another. Before we quote anything, we need the label. Your CGI product label should be on the part itself or on the original installation documentation. If you can’t find it, measure the part and photograph both sides. A few minutes with a tape measure saves a return trip and a wrong-order wait.

Two things trip people up with CGI specifically. First, the mounting profile changed between some series revisions, so a part that looks identical in a photo may not seat correctly on your model. Second, the fastener pattern on some CGI panels is specific to the gauge and panel length, and using a generic screw can void the panel warranty. Those aren’t guesses. They’re the two failures we see most in Arlington when someone buys the part before confirming the model.

On the OEM-versus-aftermarket question, an original CGI part is the safe default for warranty and fit. A quality aftermarket equivalent can work well and costs less, but only if the spec sheet matches your series exactly. Ask before you buy. We’re an independent service provider, not affiliated with CGI, so we’ll tell you straight which way makes sense for your roof.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Roofing Is Failing

  • Staining on the ceiling below a valley or penetration. Water is finding a path around flashing or a failed sealant joint. In Arlington, the afternoon sun cooks those joints and they crack before the panel itself gives out.
  • Lifted or curling edges on panels. Heat cycling expands and contracts metal and sealant over years. When the edges lift, wind gets underneath and the problem grows fast during storm season.
  • Granule loss or bare spots (shingle CGI systems). The protective layer is gone and the mat is exposed. Once you can see the backing, the shingle is near the end of its life, not just weathered.
  • Rust streaks or corrosion at fasteners. The fastener is the first thing to go on a metal system. Corroded screws mean water is getting past the seal and the panel attachment is weakening.
  • Soft spots when you press near the ridge or valley. This points to decking moisture underneath, not just the surface part. That’s the one that needs attention now, because a rotting deck turns a repair into a replacement.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what Arlington pricing looks like for roofing work involving CGI-compatible components:

Job Installed range
Roof repair (part + labor) $400 – $1,800
Tile roof repair $600 – $2,500
Full roof replacement $8,000 – $20,000
Metal roof installation $15,000 – $40,000

What drives the range: roof size and pitch, how many layers need tearing off, whether the deck is sound underneath, and whether the part is OEM or a matched equivalent. We itemize the part and the labor separately, so you can see exactly what you’re paying for. Every price change comes as a written change order before we move on it. Work is backed by our 90-Day Done Right Promise. We serve Arlington and the surrounding towns, and our technicians have up to 28 years of experience.

DIY or Call Us?

You can safely do a few things yourself. Look from the ground with binoculars for lifted edges or missing pieces. Check the attic ceiling for new stains after a rain. Photograph your CGI label and any visible damage. That information gets us a faster, more accurate quote.

Roof work is different. Getting on a roof, especially a steep one, is a fall risk, and metal panels and wet shingles are slick. Chasing a leak at a valley or penetration without knowing what’s underneath can make the deck damage worse. The honest answer: look, don’t climb. Call (888) 590-9867 and we’ll come out, identify the part, and give you a written estimate.

FAQs

How long does CGI roofing last in Texas? You can expect 20 to 30 years for a well-installed metal CGI system here, though North Texas heat and hail shorten that. Sealants and fasteners typically wear out before the panels do, so a mid-life check around year 10 to 12 is worth it.

Can it be repaired instead of replaced? Often yes. A single failed area or damaged panel can be swapped without replacing the whole roof. If the deck underneath is soft or the failure spans several sections, replacement may cost less than repeated repairs.

How long does the part swap take? A simple repair is usually a half-day to a full day, depending on access and how much is involved. A full replacement runs one to three days. We’ll give you the timeline in the written scope, not over the phone.

How do you source the CGI part? We match it to your exact series and model number before ordering, and we’ll tell you whether an OEM part or a quality matched equivalent is the better call. You get the part number in writing before it’s ordered. For other premium brands we install, we also work with KraftMaid, Cambria, and Silestone.

Call (888) 590-9867 for a free estimate. A live person answers, day or night. We’ll come out, confirm the CGI part, and hand you a written price with the part and labor broken out. Free second opinion on any written estimate, no trip charge inside the county, $40 off any repair over $200, and a standing 10% Senior & Veteran discount.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch