A Barrett company - serving Arlington, TX

Cover Bathroom Remodeling in Arlington, TX

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Cover Bathroom Remodeling: The Arlington Owner’s Guide

Barrett & Sons Construction installs Cover-compatible bathroom remodeling in Arlington, with typical installed pricing running $9,000 to $28,000 depending on bathroom size and finish level. That range covers everything from a tub-and-tile refresh to a full walk-in shower conversion. In older Arlington homes, particularly the 1960s and 1970s builds around central Arlington and the U.S. 287 corridor, the work usually starts because a tub surround has cracked, a shower pan has started holding water, or a vanity cabinet has swollen at the base and begun pulling away from the wall.

Call (888) 590-9867

Key Takeaways

  • Cover-compatible bathroom work in Arlington runs $9,000 to $28,000 installed, with a small bathroom remodel at $5,000 to $12,000.
  • Identifying your exact Cover series before ordering tile, a shower pan, or a vanity is the single most common compatibility slip.
  • Permits are pulled and inspections signed on every eligible job; Arlington requires them for plumbing and shower changes.
  • Every price change ships as a written change order before any work starts.
  • Barrett & Sons Construction is an independent service provider and is not affiliated with Cover.

Which Cover Models This Applies To

Cover’s bathroom lines break into a few broad groups: standard tub-and-shower surrounds, walk-in shower kits, and vanity-and-top combinations. Each has its own panel dimensions, drain-and-pan footprint, and trim profile, and the fit is not interchangeable. Your first step is to read the spec label on the original Cover carton, if you kept it, or match the model number stamped on the shower pan or surround trim to the Cover series that produced it. If neither is legible, measure the shower pan footprint and the panel height and depth yourself; a 60-inch by 30-inch pan is not the same as a 60-inch by 34-inch, and the difference decides whether an OEM replacement drops in or the wall has to be reframed.

On the OEM-versus-aftermarket question, Cover’s original parts are the safest fit but not always the fastest, and they’re not always what a covered bathroom needs. A quality aftermarket pan or tile board, matched correctly to the opening, will perform every bit as well and cost a good deal less. What matters is that the fit is verified against the Cover model, not assumed. That’s the check we run before a single board comes off the wall in Arlington.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Cover Bathroom Remodeling Is Failing

  • Grout or caulk running a hairline crack at the pan seam. That’s often a shower pan losing its bond to the subfloor, not just a caulk joint wearing out. Left alone through a Texas summer, water finds the crack before you do.
  • A surround panel that flexes when you press it. Usually a failed substrate behind the tile board. Grout has cracked and the panel has gone loose on its studs.
  • Water pooling in the pan or a slow drain. Either a compromised liner or a pan that has settled out of slope. In Arlington’s clay soils this is common in older slab homes where the slab has moved.
  • Swollen, soft touch at the base of the vanity cabinet. The top has been leaking into the cabinet, or the cabinet is sitting on a wet floor. It will not dry out from inside the house.
  • Trim or flooring at the bathroom threshold pulling away. That’s moisture escaping the shower area. It’s often the first sign a relocation bath went bad before the leak reached the ceiling below.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Service Arlington Installed Range
Full bathroom remodel (Cover-compatible materials) $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Shower replacement $3,000 – $8,500
Tub-to-shower conversion $3,500 – $10,000
Vanity installation $800 – $3,000

What moves you up or down the range: tile selection, whether the shower valve has to be relocated, and whether the vanity is a stock size or a custom fit. The price you receive is itemized, with every allowance written into the scope, so there’s no surprise invoice at the end. Every eligible job gets permits pulled and inspections signed, and the whole job is backed by the 90-Day Done Right Promise in writing.

DIY or Call Us?

Some things an Arlington homeowner can safely check: re-caulk a shower seam, confirm the model number on your Cover trim, measure the pan. Replacing a shower pan or moving a shower drain is a different matter. It means removing the pan, opening the framing, and redoing the liner to get the slope right. Done wrong, it leaks into the room below. Specialized plumbing and drain work is not a homeowner job, and the insurance and inspection trail isn’t either.

Call Barrett & Sons Construction at (888) 590-9867 for a free estimate. We carry premium brands across every trade, from KraftMaid and Cambria in kitchens to the tile and fixtures that go into a Cover-compatible bath. We’re also the name behind a lot of Arlington work in window, roofing, and fence projects. Ask anyone on your street. Tom’s number is answered by a person.

FAQs

How long does Cover bathroom remodeling last?
A properly installed Cover-compatible bath with a quality liner and set pan typically lasts 15 to 25 years in an Arlington home. Clay soil movement and summer humidity are the two main threats to that number, so a good pan, a correct slope, and a properly vented install matter more than the fixture brand on the box.

Can the part be repaired instead of replaced?
Sometimes. A cracked caulk line or a loose panel clip is a repair. A pan that has failed its slope or a surround that has gone soft behind the tile board isn’t. We’ll tell you which you’re looking at on the estimate, and we won’t sell a replacement for a job a $40 second opinion could fix.

How long does the swap take?
A shower replacement or tub-to-shower conversion is usually three to six working days, with the inspection scheduled inside that window. A full bathroom remodel runs three to five weeks depending on custom tile and cabinet lead times.

How do you source the part?
We match against your Cover model and order the exact pan, surround, or vanity that fits. Where OEM is the right call, we order OEM. Where a quality aftermarket equivalent is the better value and a verified fit, we say so and put the price in writing. Either way, the line-item scope arrives before work starts.

Call (888) 590-9867 for an exact quote. Estimates are free, and we answer the phone.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch