A Barrett company - serving Arlington, TX

Cover Kitchen Remodeling in Arlington, TX

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Cover Kitchen Remodeling: The Arlington Owner’s Guide

We install Cover-compatible kitchen remodeling across Arlington at installed prices from $14,000 to $45,000, with cabinet-only work running $4,000 to $13,000. Every job is scoped in writing before we start, with permits pulled on every eligible project. Owners usually find the problem the same way: a door that won’t close flush, a drawer that sticks halfway, a countertop seam that’s opened up, or a soft spot under the sink that turns out to be more than the drain.

Call (888) 590-9867

One thing to know up front: Barrett & Sons Construction Arlington is an independent remodeling company, not affiliated with Cover. When you call us, you’re getting an honest read on what’s actually failing and a straight price to fix or replace it, not a sales pitch for a factory service line.

Key Takeaways

  • Cover’s kitchen systems show up in framing, cabinet boxes, and finish trim, and the parts don’t swap across every series.
  • Installed costs in Arlington run $14,000 to $45,000 depending on scope, with the low end for a small kitchen refresh and the high end for a full gut with island and premium counters.
  • A failed part is often repairable; a failed system usually isn’t. We’ll tell you which one you have.
  • Every scope and price change comes in writing before we touch anything.

Which Cover Models This Applies To

Cover’s kitchen line shows up most often in Arlington homes built or updated in the last fifteen years, and the parts are not universal. The model number lives on a label inside the cabinet box door, on the back panel near the upper hinge, or stamped under the top rail of a base cabinet. Read that label before you call anyone, including us. The series prefix is what determines hinge plate pattern, drawer glide length, and box depth.

Here’s the gotcha most owners miss: a 24-inch Cover base cabinet from one series can carry a different glide system than the same nominal size from another, so a box that measures right may still not accept the drawer hardware you ordered. The spec range that matters most is the box depth and the mounting screw pitch on the glide. Get both wrong and you’ll be drilling new holes in old wood, which weakens the frame.

On the OEM-versus-aftermarket question for Cover specifically, we lean toward OEM or a verified equivalent for hinges and glides, because the mounting pattern is the whole game. For countertops, backsplash, and island cabinetry we’ll happily install premium lines from KraftMaid, Cambria, or Silestone where the existing structure supports them. On roofs we work with GAF and CertainTeed; on windows, Andersen and Marvin. You can look every one of those up yourself before you sign anything.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Cover Kitchen Remodeling Is Failing

These are the five calls we get most often in Arlington. Each one has a cause, and the cause tells you whether it’s a part swap or a bigger conversation.

  • The door sags and won’t sit flush. Usually a stripped hinge screw or a blown-out hinge plate, not a warped door. Catch it early and it’s a hardware swap; wait and the plate tears out of the box side and you’re into cabinet repair.
  • Drawer glides stick or the drawer drops at the front. The glide has worn past its tolerance, or the rear mounting bracket has loosened from the box. Texas humidity swings are the silent driver here; wood swells in summer and shrinks in winter, and glides take the strain both ways.
  • The countertop seam has opened or the surface is lifting. Adhesive failure from heat cycling, or a substrate that got wet and swelled. Laminate and solid surface lift; stone seams open. Neither one gets better with a tube of caulk.
  • Soft spots or dark staining under the sink or along the backsplash. Water has been finding the same spot for a while. The visible damage is the small part; the question is whether the cabinet base and drywall behind it are still sound.
  • Cabinet doors no longer line up across a run. The frame has shifted, usually because the cabinet wasn’t fastened to the wall at enough points, or because a previous install skipped a shim. This one is a structural read, not a hardware order.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed prices for kitchen work in Arlington, with labor and materials quoted as separate lines so you can see what you’re paying for:

Scope Installed Range
Full kitchen remodel $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the range: the number of cabinet boxes, countertop material and edge profile, whether plumbing or electrical has to move, and whether the existing layout stays put. A like-for-like cabinet swap sits near the bottom. A full gut with a relocated island sits near the top. Every scope, every allowance, and every price change arrives as a written change order before work happens, because the allowance that isn’t on paper is a surprise waiting for a date. Permits are pulled and inspections signed on every eligible job. The finished work is backed by the written 90-Day Done Right Promise: one call brings Tom back if something isn’t right.

DIY or Call Us?

An owner can safely handle a few things. You can read the model label, measure the box depth, photograph the hinge and glide so we know exactly what you’re dealing with, tighten a loose hinge plate with the right screw, and clean and dry the area under a leaking sink before anyone comes out. That’s all useful.

Where it goes wrong: forcing a glide that doesn’t match the mounting pitch, drilling new holes into a cabinet box to make hardware fit, gluing a lifted countertop seam, and cutting into a backsplash without knowing what’s behind it. We’ve seen a homeowner chase a stuck drawer into a pinhole in a supply line and turn a $200 part swap into a $2,000 cabinet base replacement. Call (888) 590-9867 with your model number and we’ll tell you honestly whether it’s a part or a project. Free second opinion on any written estimate, and no trip charge inside the county.

FAQs

How long do Cover kitchen parts last? Expect 10 to 15 years from hinges and glides under normal use, and 15 to 20 from cabinet boxes if they stay dry. Arlington’s humidity swings shorten that on the lower end; boxes near a dishwasher or under-sink cabinet routinely show wear sooner.

Can it be repaired instead of replaced? Often, yes. A single failed hinge or glide is a straightforward swap. A cabinet box with soft, swollen particleboard around the mounting points can sometimes be repaired with a backing plate, but if the frame itself has gone soft, replacement is the honest answer and we’ll say so.

How long does the swap take? A hinge or glide swap runs one to two hours on site. Cabinet installation runs two to four days for a standard run, countertop install a day, backsplash a day, and a full kitchen remodel four to six weeks depending on material lead times. We give you the timeline in writing before we start.

How do you source the part? We identify the Cover series from the label, confirm the mounting spec, and order from the supplier with a written lead time. If an exact OEM part isn’t available, we propose a verified equivalent in writing and let you approve it before we order. Nothing gets installed that you haven’t signed off on. Call (888) 590-9867 for a free estimate, and we’ll bring you a straight answer on the part before you spend anything.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch