Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Arlington Homeowners Choose Cover Construction
We provide independent Cover construction service in Arlington for homeowners who already own Cover cabinetry or are planning a Cover kitchen. What sets our Cover work apart is a bench of installers who know frameless full-overlay boxes, soft-close hardware, and painted finish systems at the part level, not just the showroom level. We are not affiliated with, sponsored by, or authorized by Cover. We’re an independent Cover service provider, and that independence is the point: we answer to you, not to a factory rep. Calls reach a live person at (888) 590-9867, day or night.
Why Trust Barrett & Sons Construction Arlington for Your Cover Construction?
The installers we work with have handled Cover’s full-overlay systems enough times to hear a problem before they see it. Hinge drift, a drawer that closes hard instead of soft, a hairline crack at a door edge: each one points to a specific cause, and knowing the cause is what keeps the fix small and the warranty intact.
We work with OEM-compatible Cover hardware whenever it’s available, because matching the original hinge and slide preserves fit, finish, and your manufacturer warranty. When OEM parts are backordered or discontinued, we fit quality aftermarket soft-close slides and hinges from established brands and tune them to the same spec. No part goes in without the homeowner knowing exactly what it is and why.
Our crew members are background-checked and experienced, with up to 28 years on the tools. Every scope and price change arrives in writing before work starts. And since these are cabinet and millwork jobs where the warranty terms are set by the product maker, we read those terms before we touch a box, then finish every eligible job with permits pulled and inspections signed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Cover Construction Problems We Fix in Arlington
Most Cover cabinet trouble we see in Arlington isn’t a manufacturing failure. It’s hardware wear, humidity, or an install that skipped a step. Here’s what actually shows up:
- Door and drawer misalignment in frameless full-overlay systems. Frameless boxes have no face frame to hide a gap, so a hinge that’s drifted a millimeter shows as a door rubbing the one beside it. North Texas humidity swings drive the wood and the particleboard, and over a few seasons the reveals open up at the corners. Realignment and fresh hinge anchoring usually solve it.
- Soft-close slides that stop closing softly. A drawer that slams shut or won’t latch has lost slide tension, or the slide has picked up grit and dried lubricant. In Arlington’s heat, a slide tucked against a wall oven cabinet dries out faster than one in a shaded run. Replacement with OEM or a quality aftermarket unit restores the soft close.
- Painted finish chipping at door edges and hardware holes. Cover’s painted lines, white and gray especially, take the most abuse at the leading edge of a door and around the pull where hands and keys land. A small chip left alone wicks moisture and spreads. Touch-up finish matched to the original color stops it.
- Cabinet boxes sagging or separating from the wall. This is an install problem, not a product problem. When a run of upper cabinets went up without proper blocking behind the drywall, the screws work loose and the box pulls away. We add blocking and re-secure the run to studs.
- Finish yellowing on white painted doors facing a west window. Arlington’s long, bright afternoons and a west-facing kitchen wall fade and yellow white paint over time. Matching a new door or pantry panel to aged paint takes a color-match step, not a stock-swatch guess.
What this usually looks like on a real Cover job
A common Cover cabinet issue in Arlington is a bank of full-overlay doors that no longer sit flush after years of humidity swings. Doors rub at the corners, and soft-close drawers stop latching. The usual cause is hinge screws backing out of particleboard or slides that have lost tension. A qualified installer typically re-secures hinges with proper anchors, replaces worn slides with OEM or quality aftermarket units, and adjusts door gaps for even reveals. None of it requires tearing out the cabinets.
Cover Parts & Our Repair-vs-Replace Approach
For Cover cabinetry, genuine OEM hinges, drawer slides, and touch-up finish are the first choice every time. They preserve the original fit, keep the reveals even, and protect your warranty. We source each part per job rather than carrying Cover stock, so the right hinge for your model is ordered to match, not dug out of a bin.
When an OEM part is discontinued or backordered, we tell you, in writing, and offer a quality aftermarket substitute from a known brand. That’s a fair trade and it holds up.
Repair is usually the honest answer for alignment, hardware, and finish problems. Full replacement only makes sense when a box is water-damaged or the layout no longer fits how you live. We’ll say so either way. Call (888) 590-9867 for a free second opinion on any written estimate.
Our Cover Service Process – Step by Step
- 1
Diagnosis. We go through your Cover run door by door, check hinge and slide wear, test soft-close action, and look behind a cabinet or two for missing blocking. You get the findings in writing.
- 2
Plan and quote. We name the parts, the finish match, and the scope. Any change to scope or price arrives as a written change order before work starts.
- 3
Repair or install. We re-anchor hinges, swap slides, touch up finish, reface, or set new Cover cabinets per plan, leveling and shimming each box so the reveals stay even.
- 4
Test. Every door and drawer gets opened and closed under load. We check soft-close action, gap alignment, and hardware torque before we call it done.
- 5
Warranty and handoff. We walk you through the work, leave the finish care notes, and back the job with our written 90-Day Done Right Promise.
Cover Products We Service & Install in Arlington
We handle Cover’s frameless full-overlay cabinets in shaker and slab door styles, and semi-custom kitchen and bath cabinetry with soft-close drawer slides. Painted and stained finish lines are covered, including the white and gray tones many Arlington kitchens run. Modular pantry and storage systems are in scope too, plus cabinet installation and refacing, kitchen design and layout, and full kitchen work. For older central and east Arlington homes, that often means working new Cover boxes around 1950s and ’70s walls that are out of square. For newer builds in far north and south Arlington, it’s clean new-cabinet install and add-on runs that need to match an existing finish.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
Cover cabinets rarely live alone in a kitchen. When a job calls for countertops or fixtures to match, we work across KraftMaid, Cambria, Silestone, and Kohler as well. That means you can get the cabinet, the counter, and the sink from one contractor relationship instead of three, with the scope and pricing in writing before anything starts.
Cover Cabinet Project Pricing in Arlington
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
Those are market ranges, not a bid. Your number depends on linear feet, door style, finish, and whether we’re matching existing Cover cabinets or setting a whole new run. Estimates are free and itemized line by line, and any change to the scope is a written change order before work proceeds. Call (888) 590-9867 for an exact quote.
FAQs – Cover Construction Service in Arlington
No. We are an independent Cover service provider and are not affiliated with or authorized by Cover. We work with independent, licensed local professionals who specialize in Cover cabinetry and millwork and know the product lines, box construction, and finish systems.
Usually, yes. We color-match to your aged finish rather than guessing off a stock swatch, then touch up to blend. Cabinets that have seen a few years of sunlight read slightly warmer than factory new, and the match is built around that. Call (888) 590-9867 for a free estimate.
It’s almost always a repair. The slide has lost tension or picked up grit, and swapping it for an OEM or quality aftermarket unit restores the soft close. Call (888) 590-9867 for an exact quote.
If the boxes are solid and dry, they can usually be refaced. Reface when the layout works and only the doors and fronts are tired; replace when a box is water-damaged or the layout doesn’t fit your kitchen. We’ll tell you which one is honest for your situation. Call (888) 590-9867 for a free second opinion.
Yes, OEM hinges, slides, and touch-up finish come first, because they preserve fit and warranty. When OEM parts are discontinued or backordered, we fit quality aftermarket substitutes and tell you in writing what changed and why. Call (888) 590-9867 for an exact quote.
A hardware and alignment repair is typically a short visit. A cabinet installation or refacing job usually runs a few days depending on the size of the run, and a full kitchen remodel takes longer. We give you a realistic schedule in writing up front, and any scope change is a written change order before work proceeds. Call (888) 590-9867 to schedule your free estimate.
Frameless full-overlay cabinets in shaker and slab door styles, semi-custom kitchen and bath cabinetry with soft-close slides, painted and stained finish lines including white and gray, and modular pantry and storage systems. If your model isn’t listed, call and describe it.
Warranty-safe service means using OEM or approved parts and following the maker’s install specs, which is how we work. We read the warranty terms before touching a box so the fix protects it rather than voiding it. Call (888) 590-9867 if you have a warranty concern.
Cabinet installation runs $4,000 – $13,000, a full kitchen remodel $14,000 – $45,000, countertops $2,000 – $6,500, and a backsplash $800 – $2,500. Call (888) 590-9867 for an exact quote. Estimates are free.
Yes, often. In 1950s and ’70s central and east Arlington homes, walls are frequently out of square, so upper cabinets need solid blocking behind the drywall and careful shimming to sit level and stay put. We check for that before we hang a box. Call (888) 590-9867 to schedule your free estimate.
Book Your Cover Service in Arlington, TX
Whether it’s a door that rubs, a drawer that won’t close soft, or a full Cover kitchen going in, we’ll send an experienced installer out, put the scope in writing, and stand behind it with the 90-Day Done Right Promise. Call (888) 590-9867 for a free estimate. A live person answers, day or night.
Written by the team at Barrett & Sons Construction Arlington.