Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Bathroom Remodeling: The Arlington Owner’s Guide
CWS bathroom remodeling in Arlington runs $9,000 – $28,000 for a full bathroom, and small bathroom remodels land at $5,000 – $12,000. We handle CWS-compatible bathroom installations and finish work with written pricing and permits pulled – though planned remodeling is scheduled, not same-day. Most owners call us after the room starts talking back: a shower pan that flexes underfoot, grout that keeps cracking over the same seam, a fan that runs but never clears the mirror, or a vanity door that hangs crooked because the cabinet sagged.
Barrett & Sons Construction Arlington is an independent remodeling company, not affiliated with CWS. We work on the bathrooms, not on the CWS name.
Which CWS Models This Applies To
CWS makes finish materials and fixtures rather than a single locked system, so what matters before we quote is matching the actual spec, not guessing at the label. Shower pans and surround panels come in fixed nominal sizes – most commonly 60-inch and 48-inch alcoves – and a half-inch of framing out of plumb throws off a panel fit before you ever set it. Vanities come in standard widths that depend on the top you chose; we measure the cabinet box, not just the counter.
To identify what’s in your bathroom: read the sticker on the inside of the vanity cabinet door, the back of the surround panels near the shower valve, and any documentation left with the homeowner. Take photos of those labels plus a tape pull across the shower opening and the vanity width. That’s what lets us confirm whether your existing CWS parts stay and coordinate with a new tub, valve, or tile face.
On OEM versus aftermarket for CWS: a factory-matched surround panel or shower pan is worth the wait when the color has to match an existing panel line. Aftermarket is fine for tile backer, waterproofing membrane, framing, valves, and drain assemblies – the parts behind the wall that nobody sees. We install KraftMaid cabinetry and Cambria or Silestone tops when a bathroom calls for a name we can look up in a catalog, and we tell you plainly when the CWS piece can stay.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Bathroom Remodeling Is Failing
Texas heat and humidity are hard on bathrooms, and Arlington sits in the kind of clay-heavy ground that moves a little with every wet and dry cycle. Here’s what usually brings us out:
- A shower pan that moves underfoot. Flex means the mortar bed or subfloor support has failed, and water is finding the gap instead of the drain. Left alone, it rots the subfloor around the pan.
- Grout and caulk cracks returning along the same line. A repeat crack at the pan-to-wall joint usually means movement or a missing waterproofing layer behind the tile, not bad caulk.
- Peeling or bubbling paint over the shower. That’s moisture escaping into the wall because the bath fan is undersized or venting into the attic instead of outside.
- Vanity doors that hang or rub. A sagging cabinet box or soft flooring underneath lets the unit settle out of square as it takes on water.
- Water stains or soft spots on the ceiling below. The clearest sign the shower pan or drain seal has failed. Stop using that shower and call.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full CWS bathroom remodel in Arlington runs $9,000 – $28,000, with small bathrooms at $5,000 – $12,000. What pushes you up the range: whether the shower pan and surround both get replaced versus one, tile versus a preformed CWS surround, and whether we’re opening the wall to correct framing or venting.
- Full bathroom remodel: $9,000 – $28,000
- Small bathroom remodel: $5,000 – $12,000
- Walk-in shower installation: $4,500 – $12,000
- Tub-to-shower conversion: $3,500 – $10,000
- Shower replacement: $3,000 – $8,500
- Vanity installation: $800 – $3,000
Profit isn’t hidden in that range. Every allowance and every price change arrives as a written change order before the work happens. Permits get pulled and inspections signed on eligible jobs, and the whole thing is backed by our 90-Day Done Right Promise – in writing on the contract. Call (888) 590-9867 to schedule your free estimate.
DIY or Call Us?
Some of this an owner can safely check. Read the CWS labels, measure the shower opening and vanity width, look at whether the bath fan actually vents outside, and watch the shower pan for movement. That information helps us quote accurately and keeps you from buying the wrong size.
Where it goes wrong is water behind the wall. Pulling a surround panel or a shower pan without knowing the waterproofing underneath turns a replace-one-part job into a rebuild, and mold behind tile in a Central Texas bathroom spreads faster than people expect. We’ve seen a “quick pan swap” turn into a full shower rebuild more than once. If the flooring or framing is soft, or you see water below, that’s our job – call (888) 590-9867 and let’s get it looked at.
FAQs
A properly installed CWS shower surround or vanity typically holds up 15 – 20 years, and tile that’s waterproofed correctly behind it lasts longer. What shortens that here is trapped moisture – a fan venting into the attic or a pan that lost its seal will do more damage than the materials ever will. Ask us for an exact quote – estimates are free.
Sometimes, yes. A loose vanity door or a single cracked panel can often be fixed without replacing the whole unit, and a leaking valve is a valve job, not a tear-out. A moving shower pan or water behind the tile is a replacement. We’ll tell you honestly which one you’re looking at – call (888) 590-9867.
A vanity replacement is usually a one-day job. A shower pan and surround replacement runs two to four days once materials are on site, and a full bathroom remodel takes two to three weeks. We give you the schedule in writing before we start. Call (888) 590-9867 for a free estimate.
We identify the model from the cabinet, panel, or fixture label first, then order the matching CWS piece through supplier channels – we don’t carry parts on a truck and won’t guess at a size. If the exact match is delayed, we tell you the tradeoff before you commit. Call (888) 590-9867 to get your model identified.
For an Arlington bathroom that needs the CWS piece done right and written down, call (888) 590-9867 for a free estimate. We’re happy to give a free second opinion on any written estimate you already have.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.