Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Home Additions & ADU: The Arlington Owner’s Guide
If you have a CWS home addition or ADU and a component has failed, we install and service CWS-compatible additions and ADUs across Arlington, and a typical installed addition runs $45,000 to $130,000 depending on scope. ADU construction is its own category, priced at $90,000 to $220,000. We’re an independent service provider and not affiliated with CWS, so we match the right part to your actual model rather than guessing from a photo.
Owners usually find out something is wrong the same way you probably did. The addition that stayed sealed and quiet through the first three summers starts letting water in at a wall-to-roof transition after a hard Arlington storm. Or a framed opening in the ADU stops closing clean when the humidity climbs. Or the floor in an over-garage addition starts telling you with every step that something under it moved. That last one is the one we get called about most in Arlington in late summer.
Which CWS Models This Applies To
CWS has built its addition and ADU systems around structural panels, weather-sealed shell components, and modular framing. The part that fails relates directly to which series your structure came from, and the series matters more than most homeowners expect. Panel-to-shell connector kits are shaped and sized by series line, and a kit that fits one generation of CWS framing won’t seat clean on another. Same story for the door and window units in their modular wall systems.
Here’s how to identify what you have before you buy anything. Look for the data plate on the original framing package or the inside face of the shell panel. That plate gives you the model and series. If the plate is gone, take measurements instead: panel depth, shell thickness at the transition, and the spacing between the structural fasteners. Those three numbers narrow it down far enough to find the right part.
OEM or aftermarket is a real decision with CWS, not a marketing one. The OEM part is a guaranteed fit on the right series, and it costs more. A quality aftermarket equivalent can work on a well-documented older series where the tolerances were looser. But some CWS shell series need the OEM gasket and connector kit or the seal won’t hold through an Arlington summer, when we swing from 55-degree mornings to 100-degree afternoons and back. That thermal movement is hard on any seal, and aftermarket parts that match dimensions but not material flex don’t survive it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Home Additions & ADU Is Failing
- Water staining along the addition-to-house transition. The flashing and weather seal at that joint moves with two different structures settling at two different rates. When that seal fails, water takes the path of least resistance and it’s usually the ceiling line inside.
- A framed opening or ADU door that won’t close clean. Often the framing has shifted, or the hinge or track hardware has worn past its tolerance. A single sticking door is usually hardware. Several at once points to framing movement.
- Bouncy or uneven floor in an addition. Under-slab or under-floor supports settle differently from the main house foundation, especially in the black clay soil common across Arlington. The bounce tells you the load path has lost some of its support.
- Hairline cracks that keep growing. A crack that hasn’t changed in a year is cosmetic. One that widens through a North Texas wet spring and dry summer is telling you the structure is still moving.
- Cold spots or visible gaps at the shell joints. The weather seal at panel joints has compressed past its limit. For homes finished in the last decade, these seals are the part most likely to fail first.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing in Arlington for a CWS addition or ADU repair runs from $45,000 for a focused structural repair on a small addition up to $130,000 for a full addition. A garage-to-ADU conversion like the ones we do around Arlington Heights and Interlochen runs $30,000 to $80,000. Ground-up ADU construction is $90,000 to $220,000. The range is driven by scope, foundation condition, and whether the work needs permits and inspections.
You get a written line-item quote before any work starts. Parts and labor are separated so you can see what the part costs and what the install costs, and any scope change gets a written change order before it happens. Every eligible job is permitted and inspected, and the work comes with our 90-Day Done Right Promise in writing on the contract. Our technicians have up to 28 years of experience on addition and ADU systems.
DIY or Call Us?
Some of this is safe to check yourself. Confirm the model number. Photograph the failing joint or the door hardware. Measure the panel depth and shell thickness. Read the data plate. Those are all paperwork and eyes-only work and they’ll save us time on the phone.
Anything structural is a different matter. Additions and ADUs carry live loads and weather seals that fail quietly and badly if they’re wrong. A connector kit installed with the wrong fastener, or a weather seal that looks seated but isn’t, can leak for a year before you see it from inside. That’s not a repair we’d ever recommend a homeowner take on. Call (888) 590-9867 and we’ll tell you what the job actually is before you spend anything.
FAQs
How long should a CWS addition seal or connector kit last? A properly installed weather seal in Arlington typically holds 10 to 15 years before the thermal swing between summer and winter wears it out. Connector kits and framing hardware usually outlast the seal. The seal is the part that fails first on most CWS additions we see.
Can a failing CWS part be repaired instead of replaced? Sometimes. A door track can be adjusted. A single cracked seal can sometimes be re-set. Structural supports and framing connectors aren’t repairable once they’ve failed, and a repair that hides a moving joint just delays the real problem. We’ll tell you which one you’re looking at before any work starts.
How long does the swap take? A weather seal or a door hardware replacement on a CWS addition typically runs one to two days. Structural connector work runs two to four days. A garage conversion or a larger scope is quoted on its own schedule with a written start and finish date. Call (888) 590-9867 for a real number on your job.
How do you source the part? We confirm the series from your data plate or measurements, then match the OEM part or a verified equivalent for that specific CWS model. We don’t carry parts on a truck and won’t guess at a fit. We order the part that matches your structure and schedule the install once it’s on hand.
Call (888) 590-9867 for a free estimate on your CWS addition or ADU. A live person answers around the clock, and we’ll take your free second opinion on any written estimate you already have.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.