Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Kitchen Remodeling: The Arlington Owner’s Guide
If your CWS kitchen is failing, the repair isn’t a part number – it’s a scoped cabinet, countertop, and finish package that Barrett & Sons Construction Arlington installs for $14,000 – $45,000 on a full kitchen remodel here in Arlington. CWS is a cabinetry and semi-custom kitchen brand, and most homeowners in Arlington call us when doors stop aligning, drawers drag on the wrong slides, or a countertop seam lifts after a few Texas summers. We look at the CWS box, the model plate inside the sink base, and the millwork spec, then quote the fix in writing before anything comes out of the wall. We’re an independent contractor, not affiliated with CWS.
Which CWS Models This Applies To
CWS cabinetry shows up across several product lines, and the part that fits one series will not fit another. Framed and frameless boxes need different hinge plates, different slide brackets, and different filler strips. The fastest way to identify yours is the model label inside the sink base or on the back of the door – it lists the series, door style, and box construction. Take a photo of it and the cabinet measurements. That photo saves you a return trip and usually saves a day of guessing.
On the OEM-versus-aftermarket decision: for hinges, drawer slides, and shelf pins, quality aftermarket parts from major hardware makers are fine and often better made than what came in the original box. For finished doors, face frames, and decorative panels, going back to the CWS dealer or a cabinetmaker who can match the door style and finish is the only honest route. A mismatched door on a 12-year-old CWS kitchen in Arlington will look like a patch job the day it’s installed and worse after a humid summer. We’ll tell you which side of that line each part falls on before you spend a dollar.
The same repair logic applies across the brands we work with every week: KraftMaid, Cambria, Silestone, and CWS all have their own hardware and finish systems, and none of them swap cleanly into another.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Kitchen Remodeling Is Failing
Most Arlington homeowners don’t notice until something stops working. Here are the five symptoms we see most, and what’s actually happening underneath:
- Doors that swing open or won’t stay shut. The hinge’s self-close spring has fatigued or the mounting screws have stripped out of the particleboard box – a common failure in frameless CWS cabinets after 8 to 12 years of daily use.
- Drawers that drag or jump the track. The slide rail has worn or the box bottom has sagged under the weight of pots and canned goods. Undermount slides usually fail before the box does, so the drawer itself often outlasts the hardware two to one.
- Cabinet doors and drawers that rub or won’t align. This is almost always seasonal wood movement tied to Arlington’s summer humidity swing, not a warped door. It can often be corrected with adjusted hinges and shims.
- Countertop seams that lift, darken, or collect crumbs. Heat and moisture break down the seam adhesive over time. Left long enough, water gets under the laminate or stone and the substrate swells.
- A sagging or soft cabinet base near the sink or dishwasher. Slow leaks from a supply line or drain rarely announce themselves. The cabinet box soaks up water, the base gives way, and by then the fix is a new base cabinet, not a hinge.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Pricing in Arlington runs a wide range because “kitchen remodel” covers everything from swapping a failed drawer bank to a full tear-out and rebuild. Here’s what our installed prices look like, in writing, before work starts:
| Scope | Installed Price Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation (replacement runs) | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range is the number of cabinets replaced, door style and finish tier, countertop material, and whether the job needs a new layout or just a like-for-like swap. We quote parts and labor separately so you can see what you’re paying for the hardware versus the install. Every scope and allowance is written, and every price change is a written change order before a single nail moves. All work is backed by our written 90-Day Done Right Promise.
DIY or Call Us?
Some jobs you can handle. Checking hinge adjustment, tightening a loose slide screw, and replacing a single drawer slide are real DIY tasks – and we’ll walk you through them on the phone if you call. Where DIY goes sideways is the moment you’re pulling cabinets off the wall or redoing a countertop seam. Cabinet boxes carry hidden fasteners and the wall behind them may need repair, and a lifted countertop seam is a substrate problem wearing a cosmetic disguise. We’d rather you spend an hour on the phone with us than a weekend fighting a cabinet that isn’t coming off clean. If the job is bigger than a hinge, call (888) 590-9867 and we’ll tell you honestly whether it’s worth tackling yourself.
FAQs
Plan on 10 to 15 years for hinges and drawer slides under daily use, with boxes lasting 20 years or more if water never gets to them. Arlington’s humid summers speed up hardware fatigue and wood movement, so a kitchen that was installed in 2010 may already need slides and hinge replacements even if the doors still look fine.
Yes, in most cases. Individual hinges, slides, drawer boxes, doors, and even a single cabinet can usually be replaced without touching the rest of the kitchen. The honest line is when the cabinet box itself has water damage or the layout is failing – at that point a partial replacement costs more than it saves. Call (888) 590-9867 and we’ll tell you which side of that line you’re on.
A hardware and drawer-slide repair is a half-day job. A single cabinet or drawer bank replacement is typically a one- to two-day job. A full kitchen remodel in Arlington runs three to six weeks depending on scope, permits, and countertop fabrication time.
We source hardware through the same cabinet-hardware channels that stock OEM-equivalent hinges, slides, and shelf pins, and we match finished doors and panels to your door style and finish through the cabinet dealer network. We don’t claim to carry stock or truck parts – every job gets quoted against the actual part on the actual model. Call (888) 590-9867 with a photo of your model label and we’ll get you an exact number.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.